No (1447)
Number of found documents:
1447
Published from
to
Characterization of five mosaic mortar beds from Austria produced by A. Neuhauser/Tiroler Glasmalerei and J. Pfefferle
Bauerová, Pavla; Frankeová, Dita; Slížková, Zuzana
2023 - English
The report contains the results of material analyses of five mortar beds of mosaics produced by the Austrian studios Neuhauser/Tiroler Glasmalerei and Josef Pfefferle. The analysed samples come from mosaics made at the turn of the 19th and 20th centuries and located in various places in Tyrol. The mortars were analysed by SEM-EDS and thermal analysis. The results showed that, in addition to traditional materials such as marble dust, they also contain atypical or innovative components such as waste ceramic and glass shards or early Portland cement.
Keywords:
SEM-EDS analysis; historic mortar; mosaic; thermal analysis
Available at various institutes of the ASCR
Characterization of five mosaic mortar beds from Austria produced by A. Neuhauser/Tiroler Glasmalerei and J. Pfefferle
The report contains the results of material analyses of five mortar beds of mosaics produced by the Austrian studios Neuhauser/Tiroler Glasmalerei and Josef Pfefferle. The analysed samples come from ...
Measurements on Turbine Cascade KOBRA
Luxa, Martin; Hála, Jindřich; Šimurda, David
2023 - English
The report contains results and evaluation of aerodynamic measurement on a blade cascade representing the section imitating the conical stream line in the last rotor row of a gas trubine under considerable off-design condition. The research report contains detailed specifications of the measured model, overview of the results of the optical measurements (interferometry, schlieren method in Toepler configuration) and pneumatic measurements (traversing with five hole conical probe downstream the cascade).
Keywords:
turbine cascade; turbine off-design condition; tarnsonic flow
Available at various institutes of the ASCR
Measurements on Turbine Cascade KOBRA
The report contains results and evaluation of aerodynamic measurement on a blade cascade representing the section imitating the conical stream line in the last rotor row of a gas trubine under ...
Fish stock survey of the Lake Sevan in 2023 – final report
Prchalová, Marie; Kubečka, Jan
2023 - English
Final report on survey of fish stock of the Lake Sevan in July 2023.
Keywords:
gillnets; hydroacoustics; biomass
Available at various institutes of the ASCR
Fish stock survey of the Lake Sevan in 2023 – final report
Final report on survey of fish stock of the Lake Sevan in July 2023.
Novel embedding resins for 3D-SEM
Šlouf, Miroslav; Pavlova, Ewa; Strachota, Beata; Strachota, Adam; Nebesářová, Jana; Týč, Jiří; Krzyžánek, Vladislav; Skoupý, Radim
2022 - English
The report contains the detailed analysis of novel embedding resins for 3D-SEM.
Keywords:
novel embedding resins; 3D-SEM microscopy; higher e-beam resistance
Available at various institutes of the ASCR
Novel embedding resins for 3D-SEM
The report contains the detailed analysis of novel embedding resins for 3D-SEM.
Stress state rock mass monitoring ahead of longwall No. II/501/C, Mine Staszic-Wujek, PGG, Poland -Project RFCS DD-MET
Waclawik, Petr; Kukutsch, Radovan; Staš, Lubomír; Souček, Kamil; Vavro, Leona; Vavro, Martin; Kubina, Lukáš; Schuchová, Kristýna
2022 - English
For designing precisely the reinforcement of mine gate and reinforcing underground structures in general, knowing stress and deformation states in the rock massive in the immediate vicinity of these mine works as precisely as possible is absolutely decisive. In order to verify the rock mass stress state and its changes induced by longwall mining, the monitoring of rock mass stress changing in connection with the mine out of the coal seam No. 501, longwall face No. II/501/C in the Mine Staszic-Wujek, Poland, was suggested. The aim of the contractual research was the realisation and interpretation of the rock stress state monitoring using the CCBO (Compact Conical ended Borehole Overcoring method) and CCBM (Compact Conical ended Borehole Monitoring method) probes in the forefield of mentioned longwall face within geotechnical station. To verify stress monitoring, the survey of the state of the longwall gate was carried out using a pulse 3D scanner. The purpose was to capture deformation changes ahead of the advancing longwall face, specifically, at five stages in the ± 20 m section on each side from the installed geotechnical station.
Keywords:
pre-mining stress; induced stress; 3D laser scanning
Available at various institutes of the ASCR
Stress state rock mass monitoring ahead of longwall No. II/501/C, Mine Staszic-Wujek, PGG, Poland -Project RFCS DD-MET
For designing precisely the reinforcement of mine gate and reinforcing underground structures in general, knowing stress and deformation states in the rock massive in the immediate vicinity of these ...
TM03000027-V6: ESC 3 - Posouzení vlivu na přesnost navigačních systémů GNSS - Evaluation of factors influencing the GNSS positioning accuracy
Urbář, Jaroslav; Suchánek, P.; Chum, Jaroslav
2022 - English
Technická zpráva o vlivu na přesnost navigačních systémů GNSS. Získaná data k ověření vlivu na přesnost navigačních systémů GNSS při výskytu MSTID v ionosféře. \n\nTechnical report analyzing the effect of MSTIDs on an accuracy of GNSS based positioning. The analysis should be performed based on experimentally obtained data.\n
Keywords:
medium-scale traveling ionospheric disturbances (MSTIDs); Global Navigation Satellite System (GNSS); GADIOD; GNSS
Available on request at various institutes of the ASCR
TM03000027-V6: ESC 3 - Posouzení vlivu na přesnost navigačních systémů GNSS - Evaluation of factors influencing the GNSS positioning accuracy
Technická zpráva o vlivu na přesnost navigačních systémů GNSS. Získaná data k ověření vlivu na přesnost navigačních systémů GNSS při výskytu MSTID v ionosféře. \n\nTechnical report analyzing the ...
Annular impinging jets and an active control of hysteretic effects
Devani, Yogendrasasidhar; Antošová, Zuzana; Trávníček, Zdeněk
2022 - English
An annular air jet with and without flow control was studied experimentally using flow visualization and measurements of the wall pressure and flow velocity by the Pitot and Prandtl probes and the hot-wire anemometer. To investigate flow control swirling effects, eight synthetic jets were generated from the annular nozzle center body.The experiments cover Reynolds numbers 4000–10000 (evaluated from the outer exit diameter of the annular nozzle). For Re<9000, the bistability and hysteresis were identified and two different flow field patterns (A and B) were found under the same boundary conditions. For A pattern, a small recirculation area (bubble) of separated flow is attached to the nozzle center body. For B pattern, a large recirculation area of separated flow bridges entire nozzle-to-wall distance. For higher Re > 9000, the bistability and hysteresis were not found.Flow control swirling effects causes suppression of the hysteresis. Moreover, weak flow control causes that the entire annular jet is forced into a precessing motion.
Keywords:
annular jet; impinging jet; bistability; hysteresis
Available at various institutes of the ASCR
Annular impinging jets and an active control of hysteretic effects
An annular air jet with and without flow control was studied experimentally using flow visualization and measurements of the wall pressure and flow velocity by the Pitot and Prandtl probes and the ...
Conservation standards for archaeological sites
Drdácký, Miloš; Drdácký, Tomáš; Novotný, Jakub; Přechová, Barbora
2022 - English
The report provides a set of principles for the preventive protection, conservation and management of archaeological sites exposed to the threats of global hazards, especially natural disasters and long-term weather effects.\n\n
Keywords:
conservation; archaeological sites; Danube limes monument; natural hazards; preventive measures
Available at various institutes of the ASCR
Conservation standards for archaeological sites
The report provides a set of principles for the preventive protection, conservation and management of archaeological sites exposed to the threats of global hazards, especially natural disasters and ...
Structural mapping of exploration geotechnical boreholes walls within 2nd phase – Decline
Waclawik, Petr; Schuchová, Kristýna; Kukutsch, Radovan; Georgiou, Lucie
2022 - English
Structural-geological analysis, i.e. fracturing assessment of the walls of geotechnical boreholes (CIS38 and CIS39) within the projected Decline in lithium exploratory area was carried out on the basis of optical (OPTV) and acoustic televiewer (HiRAT) records evaluation. HiRAT and OPTV probes are part of the Robertson Geologging logging equipment. The apparatus has an electric winch with a four core logging cable, which transmits the data recorded by the probes via a data logger to a computer. The spatial data obtained from interpretation of the geotechnical boreholes records were structurally analysed. The submitted research report comprehensively summarises the findings obtained from the structural mapping of geotechnical boreholes. On the basis measured data the rock mass quality evaluation of boreholes walls were additionally done. The complex data have been allowed very precise analysis of rock mass structural conditions, which are necessary for design of opening mine working.
Keywords:
geotechnical boreholes; structural mapping; geotechnics
Available on request at various institutes of the ASCR
Structural mapping of exploration geotechnical boreholes walls within 2nd phase – Decline
Structural-geological analysis, i.e. fracturing assessment of the walls of geotechnical boreholes (CIS38 and CIS39) within the projected Decline in lithium exploratory area was carried out on the ...
Final Report of the Centre of Excellence for Nonlinear Dynamic Behaviour of Advanced Materials in Engineering
Parma, Slavomír; Gabriel, Dušan
2022 - English
This final report presents the CeNDYNMAT Center of Excellence, which was established at the Institute of Thermomechanics of the Czech Academy of Sciences in 2016 and ended in 2022. The report summarizes the most important scientific results of the center. It also gives an overview of the main outcomes and developments of the project, including budgeting, purchasing instrumentation, international cooperation and organization of conferences and summer courses.
Keywords:
nonlinear dynamic behavior; advanced materials; metal plasticity
Available at various institutes of the ASCR
Final Report of the Centre of Excellence for Nonlinear Dynamic Behaviour of Advanced Materials in Engineering
This final report presents the CeNDYNMAT Center of Excellence, which was established at the Institute of Thermomechanics of the Czech Academy of Sciences in 2016 and ended in 2022. The report ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases