No (10826)
Yes (1196)
Number of found documents:
12022
Published from
to
On Reynolds-averaged turbulence modeling with immersed boundary method
Kubíčková, Lucie; Isoz, Martin
2023 - English
The immersed boundary (IB) method is an approach in the computational fluid dynamics in which complex geometry conforming meshes are replaced by simple ones and the true simulated geometry is projected onto the simple mesh by a scalar field and adjustment of governing equations. Such an approach is particularly advantageous in topology optimizations (TO) where it allows for substantial speed-up since a single mesh can be used for all the tested topologies. In our previous work, we linked our custom IB variant, the hybrid fictitious domain-immersed boundary method (HFDIB), with a TO framework and successfully carried out an optimization under laminar flow conditions. However, to allow for optimizations of reallife components, the IB approach needs to be coupled with an affordable turbulence modeling. In this contribution, we focus on extending the HFDIB approach by the possibility to perform Reynolds-averaged simulations (RAS). In particular, we implemented the k − ω turbulence model and wall functions for closure variables and velocity.
Keywords:
immersed boundary; RAS; wall functions; CFD; OpenFOAM
Fulltext is available at external website.
On Reynolds-averaged turbulence modeling with immersed boundary method
The immersed boundary (IB) method is an approach in the computational fluid dynamics in which complex geometry conforming meshes are replaced by simple ones and the true simulated geometry is ...
Finite element modal analysis of a silicone vocal fold filled with fluid
Hájek, P.; Radolf, Vojtěch; Horáček, Jaromír; Švec, J. G.
2023 - English
A three dimensional (3D) finite element (FE) model of a silicone vocal fold (VF) filled with fluid is presented here. The silicone part of the model is based on partial differential equations of the continuum mechanics and consider large deformations. The fluid domain encapsulated in the silicone VF is defined semianalytically as a lumped-element model describing the fluid in hydrostatic conditions. The elongated and pressurized silicone VF was subjected to perturbed modal analysis. Results showed that the choice of the fluid inside the VF substantially influences the natural frequencies. Namely, the water-filling lowers the natural frequencies approximately by half over the air-filling. Besides, the procedure of reverse engineering for obtaining the geometry of the VF from already 3D-printed mold is introduced.
Keywords:
perturbed modal analysis; finite element method; vocal folds; reverse engineering; biomechanics of voice
Fulltext is available at external website.
Finite element modal analysis of a silicone vocal fold filled with fluid
A three dimensional (3D) finite element (FE) model of a silicone vocal fold (VF) filled with fluid is presented here. The silicone part of the model is based on partial differential equations of the ...
From John Graunt to Adolphe Quetelet: on the Origins Of Demography
Kalina, Jan
2023 - English
John Graunt (1620-1674) and Adolphe Quetelet (1796-1874) were two important personalities, who contributed to the origins of demography. As they both developed statistical techniques for the analysis of demographic data, they are important also from the point of view of history of statistics. The contributions of both Graunt and Quetelet especially to the development of mortality tables and models are recalled in this paper. Already from the 17th century, the available mortality tables were exploited for computing life annuities. Also the contribution of selected personalities inspired by Graunt are recalled here, the work of Christian Huygens, Jacob Bernoulli, or Abraham de Moivre is discussed to document that the historical development of statistics and probability theory was connected with the development of demography.
Keywords:
history of demography; history of statistics; probability theory; moral statistics; mortality tables
Fulltext is available at external website.
From John Graunt to Adolphe Quetelet: on the Origins Of Demography
John Graunt (1620-1674) and Adolphe Quetelet (1796-1874) were two important personalities, who contributed to the origins of demography. As they both developed statistical techniques for the analysis ...
MAD UFOs: Magnetically Arrested Discs with persistent Ultra-Fast Outflows
Suková, Petra; Zajaček, M.; Karas, Vladimír
2023 - English
We study an outflow that develops in the MAD state in 3D GRMHD simulations. We show that the outflow can be accelerated to\nrelativistic velocities and persist over the course of our simulation. We compare the properties of the outflow from MAD discs with those launched by orbiting secondary at close orbit. The main difference is that the orbiting body launches a more coherent, quasiperiodic ultrafast outflow at lower velocities (v < 0.5c) while the outflow launched in the MAD state (without the body) has a stochastic behaviour and has anapproximately flat velocity distribution between lower anf higher outflow velocities, 0.2c < v < 0.3c and v > 0.5c.
Keywords:
accretion discs; black holes; active galactic nuclei
Fulltext is available at external website.
MAD UFOs: Magnetically Arrested Discs with persistent Ultra-Fast Outflows
We study an outflow that develops in the MAD state in 3D GRMHD simulations. We show that the outflow can be accelerated to\nrelativistic velocities and persist over the course of our simulation. We ...
TESTING THE METHOD OF MULTIPLE SCALES AND THE AVERAGING PRINCIPLE FOR MODEL PARAMETER ESTIMATION OF QUASIPERIODIC TWO TIME-SCALE MODELS
Papáček, Štěpán; Matonoha, Ctirad
2023 - English
Some dynamical systems are characterized by more than one timescale, e.g. two well separated time-scales are typical for quasiperiodic systems. The aim of this paper is to show how singular perturbation methods based on the slow-fast decomposition can serve for an enhanced parameter estimation when the slowly changing features are rigorously treated. Although the ultimate goal is to reduce the standard error for the estimated parameters, here we test two methods for numerical approximations of the solution of associated forward problem: (i) the multiple time-scales method, and (ii) the method of averaging. On a case study, being an under-damped harmonic oscillator containing two state variables and two parameters, the method of averaging gives well (theoretically predicted) results, while the use of multiple time-scales method is not suitable for our purposes.
Keywords:
Dynamical system; Singular perturbation; Averaging; Parameter estimation; Slow-fast decomposition; Damped oscillations
Fulltext is available at external website.
TESTING THE METHOD OF MULTIPLE SCALES AND THE AVERAGING PRINCIPLE FOR MODEL PARAMETER ESTIMATION OF QUASIPERIODIC TWO TIME-SCALE MODELS
Some dynamical systems are characterized by more than one timescale, e.g. two well separated time-scales are typical for quasiperiodic systems. The aim of this paper is to show how singular ...
Different Boundary Conditions For LES Solver PALM 6.0 Used for ABL in Tunnel Experiment
Řezníček, Hynek; Geletič, Jan; Bureš, Martin; Krč, Pavel; Resler, Jaroslav; Vrbová, Kateřina; Trush, Arsenii; Michálek, Petr; Beneš, L.; Sühring, M.
2023 - English
We tried to reproduce results measured in the wind tunnel experiment with a CFD simulation provided by numerical model PALM. A realistic buildings layout from the Prague-Dejvice quarter has been chosen as a testing domain because solid validation campaign for PALM simulation of Atmospheric Boundary Layer (ABL) over this quarter was documented in the past. The question of input data needed for such simulation and capability of the model to capture correctly the inlet profile and its turbulence structure provided by the wind-tunnel is discussed in the study The PALM dynamical core contains a solver for the Navier-Stokes equations. By default, the model uses the Large Eddy Simulation (LES) approach in which the bulk of the turbulent motions is explicitly resolved. It is well validated tool for simulations of the complex air-flow within the real urban canopy and also within its reduced scale provided by wind tunnel experiments. However the computed flow field between the testing buildings did not correspond well to the measured wind velocity in some points. Different setting of the inlet boundary condition was tested but none of them gave completely developed turbulent flow generated by vortex generators and castellated barrier wall place at the entrance of the aerodynamic section of the wind tunnel.
Keywords:
large eddy simulation; wind tunnel; atmospheric boundary layer; PALM model; turbulence
Fulltext is available at external website.
Different Boundary Conditions For LES Solver PALM 6.0 Used for ABL in Tunnel Experiment
We tried to reproduce results measured in the wind tunnel experiment with a CFD simulation provided by numerical model PALM. A realistic buildings layout from the Prague-Dejvice quarter has been ...
Room temperature ethanol detection using carbon materials
Kočí, Michal
2023 - English
Allotropic forms of carbon, in particular graphene oxide (GO) or nanocrystalline diamond (NCD), attracted the attention of many research groups due to their unique electronic structures and extraordinary physical and chemical properties, preferable for many different applications, including sensor devices. This work focuses on responses of various sensing layers (NCD with hydrogen termination (H-NCD), graphene oxide (GO), reduced graphene oxide (rGO), thiol-functionalized graphene oxide (GO-SH) and their hybrid structures to ethanol vapor with concentrations up to 100 ppm in synthetic air at room temperature. The measured parameters of the tested sensors, especially stability, reproducibility and regeneration, are compared and critically evaluated. The high sensitivity of tested sensors achieved at room temperature makes them very promising for monitoring ethanol vapor as well as other volatile substances (e.g., isopropyl-alcohol or acetone).
Keywords:
gas sensor; nanocrystalline diamond (NCD); graphene oxide (GO); reduced graphene oxide (rGO); thiol-functionalized graphene oxide (GO-SH)
Available at various institutes of the ASCR
Room temperature ethanol detection using carbon materials
Allotropic forms of carbon, in particular graphene oxide (GO) or nanocrystalline diamond (NCD), attracted the attention of many research groups due to their unique electronic structures and ...
Výzkum zříceniny hradu Štamberk v kontextu regionu
Novotný, Jakub; Ramešová, Michaela
2023 - Czech
Příspěvek přibližuje dosavadní výsledky výzkumu hradu Štamberk realizovaného dle nově definovaných zásad pro výzkum, správu a prezentaci historických zřícenin, jehož cílem je podpořit nová řešení jak zvýšit využitelnost hradu pro cestovní ruch a integrovat památku do regionálních struktur lokalit s potenciálem cestovního ruchu. Hrad byl významným panstvím v rámci území dnešní Vysočiny. Předmětem řešení projektu, na kterém od roku 2020 spolupracuje ÚTAM AV ČR s Mikroregionem Telčsko, je výzkum historie hradu se zaměřením na technologická hlediska jeho výstavby, stavebních změn i zániku. Součástí je vytvoření 3D modelu zříceniny v krajinném kontextu. Projekt se soustředí na dějiny výroby vápna a související inventarizaci geologických lokalit. Tento výzkum přináší nové informace důležité nejen pro poznání historie hradu či pro studium analogických situací, ale také pro zvýšení atraktivity památky pro cestovní ruch. Příspěvek nejprve představí aktuální standardy výzkumu a managementu zřícenin, následně se bude zabývat nástinem potenciálu výzkumu Štamberka pro oblast cestovního ruchu s důrazem na historii hradu, mapování krajinného rámce a identifikace vazeb na regionální prostředí. Na závěr zrekapituluje dosavadní výsledky využitelné k prezentaci historického, kulturního i přírodního bohatství regionu se specifickou vazbou na cestovní ruch. The paper provides an overview of the research results of the Štamberk castle carried out according to newly defined principles for the research, management and presentation of historical ruins, the aim of which is to support new solutions to increase the usability of the castle for tourism and to integrate the monument into the regional structures of localities with tourism potential. The castle was an important place within the territory of today's Highlands. The subject of the project, on which ITAM CAS has been collaborating with the Telčsko Microregion since 2020, is research into the history of the castle with a focus on the technological aspects of its construction, structural changes and demise. It includes the creation of a 3D model of the ruins in a landscape context. The project focuses on the history of lime production and the related inventory of geological sites. This research brings new information important not only for learning about the history of the castle or for studying analogous situations, but also for increasing the attractiveness of the monument for tourism. The paper first presents the current standards of research and management of ruins, then it deals with an outline of the research potential of Štamberk for the field of tourism with an emphasis on the history of the castle, mapping the landscape framework and identifying links to the regional environment. At the end, it summarizes the results so far that can be used to present the historical, cultural and natural wealth of the region with a specific link to tourism.
Keywords:
Štamberk; ruin; technological research; presentation of monuments; tourism
Available at various institutes of the ASCR
Výzkum zříceniny hradu Štamberk v kontextu regionu
Příspěvek přibližuje dosavadní výsledky výzkumu hradu Štamberk realizovaného dle nově definovaných zásad pro výzkum, správu a prezentaci historických zřícenin, jehož cílem je podpořit nová řešení jak ...
Mechanical properties of basalt: a study on compressive loading at different strain rates using SHPB
Falta, J.; Krčmářová, N.; Fíla, T.; Vavro, Martin; Vavro, Leona
2023 - English
This article focuses on the mechanical properties of basalt in compressive loading at different strain-rates. The study employs advanced instrumentation for the evaluation of the results in dynamic conditions, while standard uni-axial loading device is used for evaluation in quasi-static conditions. Basalt specimens were subjected to four different loading-rates from 200–600 s−1 on which the stress-strain dependence was evaluated together with DIC analysis of crack initiation and disintegration process. Understanding the mechanical properties of basalt can provide insights for engineers and designers in creating structures that are durable and able to withstand different loading conditions. The findings of this study can have implications for a wide range of industries, including aerospace, automotive, and construction, among others.
Keywords:
SHPB; basalt; compressive loading; dynamic loading
Available at various institutes of the ASCR
Mechanical properties of basalt: a study on compressive loading at different strain rates using SHPB
This article focuses on the mechanical properties of basalt in compressive loading at different strain-rates. The study employs advanced instrumentation for the evaluation of the results in dynamic ...
Asynchronous time integration while achieving zero interface energy
Dvořák, Radim; Kolman, Radek; Falta, J.; Neühauserová, M.
2023 - English
This contribution deals with an asynchronous direct time integration of the finite-element model. The proposed method is applied to the phenomenon of wave propagation through an elastic linear continuum. The numerical model is partitioned into individual subdomains using the domain decomposition method by means of localized Lagrange multipliers. For each subdomain, different time discretizations are used. No restrictions for relation between subdomain’s time steps are imposed. The coupling of the subdomains is forced by an acceleration continuity condition. Additionally, we use the a posteriori technique to also provide the displacement and velocity continuity at the interfaces, and hence we obtain exact continuity of all three kinematic fields. The proposed method is experimentally validated using the modified SHPB (split Hopkinson pressure bar) setup.
Keywords:
finite element method; direct time integration; asynchronous integration; domain decomposition; localized lagrange multipliers
Available at various institutes of the ASCR
Asynchronous time integration while achieving zero interface energy
This contribution deals with an asynchronous direct time integration of the finite-element model. The proposed method is applied to the phenomenon of wave propagation through an elastic linear ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases