Number of found documents: 9259
Published from to

Annular Impinging Jets and an Active Control of Hysteretic Effects
Devani, Yogendrasasidhar; Antošová, Zuzana; Trávníček, Zdeněk
2023 - English
An annular impinging air jet with and without flow control was studied experimentally using measurements of the wall pressure and flow velocity by the Pitot probe. To investigate flow control swirling effects, eight synthetic jets were generated from the nozzle center body. The experiments cover Reynolds numbers 4000–10,000 (evaluated from the outer exit diameter of the annular nozzle). For Re<9000, the bistability and hysteresis were identified and two different flow field patterns (A, B) were found under the same boundary conditions. For higher Re>9000, the hysteresis were not found. Keywords: annular jet; impinging jet; hysteresis Available at various institutes of the ASCR
Annular Impinging Jets and an Active Control of Hysteretic Effects

An annular impinging air jet with and without flow control was studied experimentally using measurements of the wall pressure and flow velocity by the Pitot probe. To investigate flow control swirling ...

Devani, Yogendrasasidhar; Antošová, Zuzana; Trávníček, Zdeněk
Ústav termomechaniky, 2023

Book of Abstracts. 18th Youth Symposium on Experimental Solid Mechanics
Kytýř, Daniel; Doktor, Tomáš; Zlámal, Petr
2023 - English
The YSESM symposium provides a forum for young researchers and engineers, PhD students and students dealing with subjects of experimental mechanics. The Symposium concentrates on current work in all areas of experimental research and its application in solid and fluid mechanics. The topic will particularly concern to: Conventional and Advanced Experimental Methods in Solid and Fluid Mechanics; Non-Destructive Testing and Inspection, Measurements in Material Science, Computer Assisted Testing and Simulation, Engineering Design Simulation, Hybrid Methods, Experimental Techniques – Numerical Simulation, Optical Methods and Image Processing, Measurements in Biomechanics, Sensor Techniques for Micro- and Nano-Applications, Measurement Methods for Forensic Engineering. Keywords: experimental mechanics; fluid mechanics; mechanics of solids Fulltext is available at external website.
Book of Abstracts. 18th Youth Symposium on Experimental Solid Mechanics

The YSESM symposium provides a forum for young researchers and engineers, PhD students and students dealing with subjects of experimental mechanics. The Symposium concentrates on current work in all ...

Kytýř, Daniel; Doktor, Tomáš; Zlámal, Petr
Ústav teoretické a aplikované mechaniky, 2023

Souvislost mezi principem nejmenší akce a termodynamickou podmínkou stability
Maršík, František; Trávníček, Zdeněk; Antošová, Zuzana
2023 - English
The extended principle is formulated for a material point (M.P.) X, which has nonzero mass, temperature, and trajectory x(X,t). The Lagrangian of this variation principle is equal to the kinetic energy from which, the internal energy of the material point (which depends on the entropy) and the additional energy caused by the frictional force are subtracted. The relation between the inertial force and the entropy gradient is found and the gravitational force is completely replaced by the entropy gradient. Thanks to the mentioned properties of the total enthalpy, the Thermodynamic criterion of stability of the state of M.P., is formulated. Keywords: principle of the least action; thermodynamic stability condition; annular swirl flow Fulltext is available at external website.
Souvislost mezi principem nejmenší akce a termodynamickou podmínkou stability

The extended principle is formulated for a material point (M.P.) X, which has nonzero mass, temperature, and trajectory x(X,t). The Lagrangian of this variation principle is equal to the kinetic ...

Maršík, František; Trávníček, Zdeněk; Antošová, Zuzana
Ústav termomechaniky, 2023

Texture Spectral Similarity Criteria Comparison
Havlíček, Michal; Haindl, Michal
2023 - English
Criteria capable of texture spectral similarity evaluation are presented and compared. From the fifteen evaluated criteria, only four criteria guarantee zero or minimal spectral ranking errors. Such criteria can support texture modeling algorithms by comparing the modeled texture with corresponding synthetic simulations. Another possible application is the development of texture retrieval, classification, or texture acquisition system. These criteria thoroughly test monotonicity and mutual correlation on specifically designed extensive monotonously degrading experiments. Keywords: Texture Comparison; Texture Modeling; Texture Retrieval; Texture Classification; Texture Acquisition Fulltext is available at external website.
Texture Spectral Similarity Criteria Comparison

Criteria capable of texture spectral similarity evaluation are presented and compared. From the fifteen evaluated criteria, only four criteria guarantee zero or minimal spectral ranking errors. Such ...

Havlíček, Michal; Haindl, Michal
Ústav teorie informace a automatizace, 2023

Book of abstracts of the 1st outdoor seminar of the Department of Optical Materials: Advances in the new materials engineering and study
Buryi, Maksym; Král, Robert
2023 - English
The seminar is dedicated to the main activities of the department of Optical Materials, FZU - Institute of Physics of the Czech Academy of Sciences in the course of national and international collaborations. In particular, the advanced methods of the (nano)materials synthesis, fabrication, and characterization are presented and discussed in detail. The aim of the seminar is to establish more of the effective paths of communication and data exchange by creating and maintaining links among the teams of national and international experts in various fields of physical and chemical knowledge, both experimental and theoretical. Keywords: nanomaterials; synthesis; data exchange Fulltext is available at external website.
Book of abstracts of the 1st outdoor seminar of the Department of Optical Materials: Advances in the new materials engineering and study

The seminar is dedicated to the main activities of the department of Optical Materials, FZU - Institute of Physics of the Czech Academy of Sciences in the course of national and international ...

Buryi, Maksym; Král, Robert
Fyzikální ústav, 2023

Stereolithography for manufacturing of advanced porous solids
Drechslerová, V.; Neuhäuserová, M.; Falta, J.; Šleichrt, J.; Kytýř, Daniel
2023 - English
The aim of this paper is focused on benefits of stereolithography (SLA) technology for the fabrication of the lightweight lattice structures with potential for load-bearing function and high absorption of impact energy. SLA is an additive manufacturing technology employing the principle of liquid resins curing moderated by radiation of a wavelength from ultra-violet band where resulting material parameters are tunable by setting of the curing process. The batches of samples manufactured using three different resins were subjected to quasi-static uni-axial tensile and compression tests. Acquired data were processed to derive deformation behaviour expressed as stress-strain diagrams and fundamental material properties. Based on the knowledge obtained from the mechanical tests, the setup of the fabrication parameters, the most suitable resin for manufacturing of the lattice structures and the overall suitability of SLA technology for the fabrication of advanced porous materials, were determined. Keywords: stereolithography; advanced porous materials; quasi-static testing; resin; mechanical characteristics Available at various institutes of the ASCR
Stereolithography for manufacturing of advanced porous solids

The aim of this paper is focused on benefits of stereolithography (SLA) technology for the fabrication of the lightweight lattice structures with potential for load-bearing function and high ...

Drechslerová, V.; Neuhäuserová, M.; Falta, J.; Šleichrt, J.; Kytýř, Daniel
Ústav teoretické a aplikované mechaniky, 2023

A new blade cascade for flutter studies
Šnábl, Pavel; Pešek, Luděk; Procházka, Pavel P.; Skála, V.
2023 - English
In this paper, a new blade cascade, developed in the Institute of Thermomechanics, is presented. The geometry of the cascade was modified so now the stall flutter can occur. It has some major construction improvements over the original cascade which now allow more precise and reliable measurements. The stability of the new blade cascade with five NACA 0010 profiles with rotational degree of freedom is assessed by Travelling Wave Mode approach and Aerodynamic Influence Coefficient approach. Keywords: blade cascade; stability; travelling wave mode; aerodynamic influence coefficient Available at various institutes of the ASCR
A new blade cascade for flutter studies

In this paper, a new blade cascade, developed in the Institute of Thermomechanics, is presented. The geometry of the cascade was modified so now the stall flutter can occur. It has some major ...

Šnábl, Pavel; Pešek, Luděk; Procházka, Pavel P.; Skála, V.
Ústav termomechaniky, 2023

Kráľova Lehota. Paleomagnetic research. Report
Elbra, Tiiu; Schnabl, Petr; Aidona, E.; Kdýr, Šimon; Uçar, Hakan; Pruner, Petr; Benediková, L.
2023 - English
Keywords: Archeological artefact; paleomagnetic dating; rock magnetism Available at various institutes of the ASCR
Kráľova Lehota. Paleomagnetic research. Report

Elbra, Tiiu; Schnabl, Petr; Aidona, E.; Kdýr, Šimon; Uçar, Hakan; Pruner, Petr; Benediková, L.
Geologický ústav, 2023

Thermal and creep analysis of VVER-1000 reactor pressure vessel at high temperatures caused by fuel melting during severe accident
Gabriel, Dušan; Gál, P.; Kotouč, M.; Dymáček, Petr; Masák, Jan; Kopačka, Ján
2023 - English
Thermal and creep analysis of the VVER-1000 reactor pressure vessel (RPV) was performed at high temperatures caused by fuel melting during severe accident. First, the integral code ASTEC was applied simulating severe accident evolution since an initiating event up to a hypothetical radioactive release into the environment. The ASTEC outputs including the remaining RPV wall thickness, the heat flux achieved and the temperature profile in the ablated vessel wall served as boundary conditions for the consequent assessment of RPV integrity carried out with the aid of finite element method (FEM). The FEM analysis was performed including the creep behaviour of RPV material using a complex creep probabilistic exponential model with damage. The objective of the analysis was to computationally assess emergency condition and, on this basis, to propose a general methodology for evaluating the integrity of RPV at high temperatures due to fuel melting during severe accident. Keywords: integrity of reactor pressure vessel; severe accident; ASTEC; creep; FEM Fulltext is available at external website.
Thermal and creep analysis of VVER-1000 reactor pressure vessel at high temperatures caused by fuel melting during severe accident

Thermal and creep analysis of the VVER-1000 reactor pressure vessel (RPV) was performed at high temperatures caused by fuel melting during severe accident. First, the integral code ASTEC was applied ...

Gabriel, Dušan; Gál, P.; Kotouč, M.; Dymáček, Petr; Masák, Jan; Kopačka, Ján
Ústav termomechaniky, 2023

Reduced modelling of aeroelastic instability in a turbine blade cascade
Pešek, Luděk; Šnábl, Pavel; Prasad, Chandra Shekhar
2023 - English
The contribution deals with the first results on flutter instability of the linear cascade triggered by impulse excitation. Together with experimental results, numerical results obtained by reduced modelling of the cascade using van der Pol model of self-excitation are presented and discussed. Keywords: flutter; blade cascade; self-excitation; Van der Pol Available at various institutes of the ASCR
Reduced modelling of aeroelastic instability in a turbine blade cascade

The contribution deals with the first results on flutter instability of the linear cascade triggered by impulse excitation. Together with experimental results, numerical results obtained by reduced ...

Pešek, Luděk; Šnábl, Pavel; Prasad, Chandra Shekhar
Ústav termomechaniky, 2023

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases