No (11866)
Yes (2885)
Number of found documents:
14751
Published from
to
Gender gap in reported childcare preferences among parents
Pertold, Filip; Sinani, S.; Šoltés, M.
2023 - English
The child penalty explains the majority of gender employment and wage gaps, however, less is known about the factors driving the child penalty itself. In this paper, we study the gender gap in childcare preferences as a potential factor that contributes to the child penalty. We surveyed Czech parents and elicited the minimal compensation they would require to stay home to care for a child. Mothers require less compensation for childcare than fathers. The estimated gender gap in childcare preferences is CZK 2,500 monthly, 7.6% of the median female wage, and cannot be explained by differences in labor market opportunities or prosocial motives to care for a family member. We further document widespread misperception of fathers’ preferences, as respondents incorrectly expect fathers to require less to care for a child than to care for an elderly parent.\n
Keywords:
childcare; gender wage gap; gender employment gap
Fulltext is available at external website.
Gender gap in reported childcare preferences among parents
The child penalty explains the majority of gender employment and wage gaps, however, less is known about the factors driving the child penalty itself. In this paper, we study the gender gap in ...
Comparison of finite element simulation of tungsten nanoindentation with Berkovich and conical indenter
Fiala, L.; Ballo, I.; Kovář, J.; Fuis, Vladimír
2023 - English
Finite Element Method (FEM) was used to study the difference between using Berkovich and conical indenters in nanoindentation test of tungsten specimen. The study was aimed to determine the\nmodulus of elasticity of a tested specimen and how it changes with different indenter. The FEM analysis also revealed that the modulus of elasticity was sensitive to the dimensions of both specimen and the indenter for which were made several numerical calculations with different dimensions.
Keywords:
nanoindentation; FEM; Berkovich indenter; conical indenter; tungsten
Available at various institutes of the ASCR
Comparison of finite element simulation of tungsten nanoindentation with Berkovich and conical indenter
Finite Element Method (FEM) was used to study the difference between using Berkovich and conical indenters in nanoindentation test of tungsten specimen. The study was aimed to determine the\nmodulus ...
Mechanical properties of basalt: a study on compressive loading at different strain rates using SHPB
Falta, J.; Krčmářová, N.; Fíla, T.; Vavro, Martin; Vavro, Leona
2023 - English
This article focuses on the mechanical properties of basalt in compressive loading at different strain-rates. The study employs advanced instrumentation for the evaluation of the results in dynamic conditions, while standard uni-axial loading device is used for evaluation in quasi-static conditions. Basalt specimens were subjected to four different loading-rates from 200–600 s−1 on which the stress-strain dependence was evaluated together with DIC analysis of crack initiation and disintegration process. Understanding the mechanical properties of basalt can provide insights for engineers and designers in creating structures that are durable and able to withstand different loading conditions. The findings of this study can have implications for a wide range of industries, including aerospace, automotive, and construction, among others.
Keywords:
SHPB; basalt; compressive loading; dynamic loading
Available at various institutes of the ASCR
Mechanical properties of basalt: a study on compressive loading at different strain rates using SHPB
This article focuses on the mechanical properties of basalt in compressive loading at different strain-rates. The study employs advanced instrumentation for the evaluation of the results in dynamic ...
Asynchronous time integration while achieving zero interface energy
Dvořák, Radim; Kolman, Radek; Falta, J.; Neühauserová, M.
2023 - English
This contribution deals with an asynchronous direct time integration of the finite-element model. The proposed method is applied to the phenomenon of wave propagation through an elastic linear continuum. The numerical model is partitioned into individual subdomains using the domain decomposition method by means of localized Lagrange multipliers. For each subdomain, different time discretizations are used. No restrictions for relation between subdomain’s time steps are imposed. The coupling of the subdomains is forced by an acceleration continuity condition. Additionally, we use the a posteriori technique to also provide the displacement and velocity continuity at the interfaces, and hence we obtain exact continuity of all three kinematic fields. The proposed method is experimentally validated using the modified SHPB (split Hopkinson pressure bar) setup.
Keywords:
finite element method; direct time integration; asynchronous integration; domain decomposition; localized lagrange multipliers
Available at various institutes of the ASCR
Asynchronous time integration while achieving zero interface energy
This contribution deals with an asynchronous direct time integration of the finite-element model. The proposed method is applied to the phenomenon of wave propagation through an elastic linear ...
Optical and Pneumatic Measurements on TR-U-11 Cascade
Luxa, Martin; Hála, Jindřich; Šimurda, David
2023 - English
The report contains results and evaluation of conducted optical (interferometry and schlieren technique) and pneumatic measurements on the first variant of the new tip section, intended for turbine rotor blade.
Keywords:
transonic flow; rotor turbine blade; tip section
Available at various institutes of the ASCR
Optical and Pneumatic Measurements on TR-U-11 Cascade
The report contains results and evaluation of conducted optical (interferometry and schlieren technique) and pneumatic measurements on the first variant of the new tip section, intended for turbine ...
Ambiguity in Stochastic Optimization Problems with Nonlinear Dependence on a Probability Measure via Wasserstein Metric
Kaňková, Vlasta
2023 - English
Many economic and financial applications lead to deterministic optimization problems depending on a probability measure. It happens very often (in applications) that these problems have to be solved on the data base. Point estimates of an optimal value and estimates of an optimal solutionset can be obtained by this approach. A consistency, a rate of convergence and normal properties, of these estimates, have been discussed (many times) not only under assumptions of independent data corresponding to the distributions with light tails, but also for weak dependent data and the distributions with heavy tails. However, it is also possible to estimate (on the data base) a confidence intervals and bounds for the optimal value and the optimal solutions. To analyze this approach we focus on a special case of static problems depending nonlineary on the probability measure. Stability results based on the Wasserstein metric and the Valander approach will be employed for the above mentioned analysis.
Keywords:
Stochastic optimization problems; static problems; empirical measure; point estimates; interval estimates; nonlinear dependence
Fulltext is available at external website.
Ambiguity in Stochastic Optimization Problems with Nonlinear Dependence on a Probability Measure via Wasserstein Metric
Many economic and financial applications lead to deterministic optimization problems depending on a probability measure. It happens very often (in applications) that these problems have to be solved ...
Dissolved and gaseous nitrogen losses in forests controlled by soil nutrient stoichiometry
Oulehle, Filip; Chuman, T.; Hruška, Jakub; Krám, Pavel; Navrátil, Tomáš; Tesař, Miroslav; Ač, Alexander; Urban, Otmar
2023 - English
This study investigates the consequences of chronic nitrogen deposition in forests, including its effects on soil and surface water quality, and greenhouse gas emissions. To predict these effects, the authors explore the controls over dissolved and gaseous nitrogen fluxes in temperate forests. Their findings indicate that stream leaching losses of dissolved nitrogen correspond with the nutrient stoichiometry\nof the forest floor, with stream N losses increasing as ecosystems progress towards phosphorus limitation. Soil nitrogen storage increases with oxalate extractable iron and aluminium content. The authors estimate soil gaseous losses based on 15 N stocks, which averaged 2.5±2.2 kg N ha-1 year-1 , comprising 20±14% of total nitrogen deposition. They also extrapolate the current gaseous nitrogen loss flux from forests globally to be 8.9 Tg N year-1 , which represents 39% of current nitrogen deposition to forests worldwide.
Keywords:
nitrogen; catchment; isotope; mass balance; denitrification; carbon; sequestration
Available in digital repository of the ASCR
Dissolved and gaseous nitrogen losses in forests controlled by soil nutrient stoichiometry
This study investigates the consequences of chronic nitrogen deposition in forests, including its effects on soil and surface water quality, and greenhouse gas emissions. To predict these effects, the ...
Hazardous components: A case study in textile waste management
Shtukaturova, Anastasia
2023 - English
Textile waste, a problem that has been somewhat overlooked for many years, is now coming to the fore.1 The textile value chain is long\nand complex, with over 8000 chemicals used in different manufacturing processes.2 A wide variety of chemicals are used in the manufacture of textile products for the improvement of essential properties and performance of textiles. Chemicals used in textiles significantly improve their quality and appearance. However, the harmful effects of these chemicals can occur at various stages of textile production and processing, such as dyeing, printing and finishing, as well as during use by consumers and at the end-of-life stage.3 There is a lack of safety information on the presence and use of all of these chemicals in consumer products.
Keywords:
textile waste; waste management; chemicals
Available in a digital repository NRGL
Hazardous components: A case study in textile waste management
Textile waste, a problem that has been somewhat overlooked for many years, is now coming to the fore.1 The textile value chain is long\nand complex, with over 8000 chemicals used in different ...
Properties and use of high-temperature biochar
Sedmihradská, Anežka
2023 - English
Despite being a hot topic in environmental research, biochar and its properties have been mainly investigated from the perspectives of feedstock type and pyrolysis temperature. Few studies have explored the effect of particle size on biochar properties.Even when the effect of particle size on crop efficiency is recognized, there is a lack of corresponding data and analysis.2–7 Therefore, we thoroughly analyzed (proximate and ultimate analysis, SEM, XRD, Raman spectroscopy) four particle size fractions (< 0.5, 0.5–2, 2–5, > 5 mm) of high-temperature biochar from a gasification power plant, the sizes reflecting those of biochar actually used in agriculture. The < 0.5 mm fraction was significantly different in terms of carbon structure, and carbon and ash content. Consequently, pH, electric conductivity and heavy metal content also differed greatly. The corresponding results for the other particle fractions were broadly similar to each other. Interestingly, for all fractions, the porosity and H/C ratio were independent of particle size, meaning that, regardless of size, the investigated biochar fractions are equally stable in soil. The 0.5–2 mm fraction was then selected to be used in different industrial or agricultural processes such as the anaerobic digestion of wastewater or livestock feeding. The effect of biochar on these processes is currently under investigation, providing only initial data so far.
Keywords:
biochar; particle size on biochar; high-temperature biochar
Available in a digital repository NRGL
Properties and use of high-temperature biochar
Despite being a hot topic in environmental research, biochar and its properties have been mainly investigated from the perspectives of feedstock type and pyrolysis temperature. Few studies have ...
Vertical gradients of atmospheric aerosols chemical composition
Kovářík, Jiří
2023 - English
The aim of this work is to obtain data on the chemical composition of aerosols at two heights (4–5 metres above ground and at 230 metres on the atmospheric tower’s measurement platform). The following and sampling techniques will be used: Aerosol Mass\nSpectrometry) – in combination with PMF (Positive Matrix Factorisation), Aerosol Chemical Speciation Monitor and Particle Into Liquid Sampler coupled with Ion Chromatography.
Keywords:
aerosols; analytical methods; chemical composition
Available in a digital repository NRGL
Vertical gradients of atmospheric aerosols chemical composition
The aim of this work is to obtain data on the chemical composition of aerosols at two heights (4–5 metres above ground and at 230 metres on the atmospheric tower’s measurement platform). The following ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases