Yes (76)
Used filters
(2)
Number of found documents:
76
Published from
to
On the X-ray micro-tomography measurements of biological samples under compressive loading
Fíla, T.; Kumpová, Ivana; Zlámal, Petr; Kytýř, Daniel; Koudelka_ml., Petr; Doktor, Tomáš; Jiroušek, Ondřej
2014 - English
In this paper, compact loading device for micro-CT measurements under applied load was used in a series of instrumented compressive test of bone sample. Tested bone samples were loaded in several deformation steps and micro-CT scanning was carried out in each step. Reconstructed three-dimensional data of intact bone sample were used to develop 3D model of the specimen. Data from each deformation step were processed by DVC method for identification of displacement and strain fields and thus for evaluation of deformation response of human trabecular bone sample.
Keywords:
micro-tomography; trabecular bone; compressive test; medical imaging; finite element modelling
Fulltext is available at external website.
On the X-ray micro-tomography measurements of biological samples under compressive loading
In this paper, compact loading device for micro-CT measurements under applied load was used in a series of instrumented compressive test of bone sample. Tested bone samples were loaded in several ...
Calibration of an image processing tool for analysis of fibre orientation in fibre reinforced composites
Hos, J.; Doktor, T.; Petráňová, Veronika; Kytýř, Daniel
2014 - English
This paper deals with calculation of fibre orientation distribution (FOD) in fibre reinforced composite. The calculation was based on image analysis algorithm applied on image acquired by scanning electron microscope. A composite with oriented fibres was selected to be enable calibration of the algorithm by comparison of the obtained results with FOD declared by the manufacturer.
Keywords:
C/PPS; fibre orientation; SEM; composite
Fulltext is available at external website.
Calibration of an image processing tool for analysis of fibre orientation in fibre reinforced composites
This paper deals with calculation of fibre orientation distribution (FOD) in fibre reinforced composite. The calculation was based on image analysis algorithm applied on image acquired by scanning ...
New devices for diagnostics of historical structures
Hasníková, Hana; Kloiber, Michal; Zíma, Pavel
2014 - English
Two new devices developed at ITAM AS CR for non-destructive testing of materials, especially from historical structures, are presented below. So called microtube is a semi-automatic portable tool for water absorption measurements. The natural stones, mortars and other porous materials can be measured and it is very useful to assess the efficiency of various hydrophobic treatments used within the restoration also. The diagnostic device for in-situ assessment of timber enables direct determination of conventional compressive strength and modulus of deformation in arbitrary depth along timber profile. The semi-destructive method causes a very gentle damage on the structural members.
Keywords:
historical structures; water absorption measurement; timber assessment
Fulltext is available at external website.
New devices for diagnostics of historical structures
Two new devices developed at ITAM AS CR for non-destructive testing of materials, especially from historical structures, are presented below. So called microtube is a semi-automatic portable tool for ...
Chemické a mineralogické složení vzorků zdící malty a omítky z kostela svaté Margity Antiochijské v Kopčanech
Slížková, Zuzana; Petráňová, Veronika; Zeman, Antonín; Frankeová, Dita; Hauková, Petra
2014 - Czech
Cílem práce bylo provedení analýzy historických malt z 9. století. Jedná se o unikátní vzorky s mimořádnou trvanlivostí odebrané během restaurování kostela. Malé množství vzorků umožnilo provést jen mikroskopické analýzy, jejichž výsledkem je charakterizace kameniva a pojiva malt. Složení malt je proměnlivé, jako pojivo prokázáno vzdušné, dolomitické i hydraulické vápno. The aim of work was analysis of the historical mortars from the 9th century. This unique specimens with exceptional durability were provided by restorer during the renovation of the church. Small amounts of samples allowed to perform only the microscopic analysis, which results in the characterization of aggregates and mortar binder. The composition of the mortars is changing as binder shown of aerial, dolomitic and hydraulic lime.
Keywords:
historic mortars; aerial lime; dolomitic lime; SEM analysis of mortars; Kopčany
Available in a digital repository NRGL
Chemické a mineralogické složení vzorků zdící malty a omítky z kostela svaté Margity Antiochijské v Kopčanech
Cílem práce bylo provedení analýzy historických malt z 9. století. Jedná se o unikátní vzorky s mimořádnou trvanlivostí odebrané během restaurování kostela. Malé množství vzorků umožnilo provést jen ...
Posouzení zranitelnosti a prevence poškození kulturního dědictví povodněmi
Nedvědová, Klára; Frankl, Jiří; Balík, L.; Šimůnek, O.; Herbstová, Vladislava; Kopecká, I.; Pergl, R.; Drdácký, Tomáš
2014 - Czech
Metodika slouží k vytvoření podrobné pasportizace objektu (jeho konstrukčního systému, materiálového složení a vnitřního vybavení) a ke zmapování ostatních faktorů sloužících ke klasifikaci zranitelnosti objektu při povodních. Ucelený a kvalitní popis těchto skutečností a vyhodnocení zranitelnosti objektů kulturního dědictví vede k návrhu optimálních preventivních opatření a snižuje riziko nevhodných zásahů a dalších poškození způsobených po povodni. One of the preconditions for successful planning is to estimate the risk of flood damage with regard to the construction resilience and constituent materials of historical objects. The output of this phase is software application and methodology for classifying the rate risk of specific constructions and materials and a reasonable estimate of risk diversification in different parts of the building. A special attention is paid to prevention and it tends to recommend suitable measures for different situations.
Keywords:
flood; vulnerability analysis; preventive measures; cultural heritage
Available in a digital repository NRGL
Posouzení zranitelnosti a prevence poškození kulturního dědictví povodněmi
Metodika slouží k vytvoření podrobné pasportizace objektu (jeho konstrukčního systému, materiálového složení a vnitřního vybavení) a ke zmapování ostatních faktorů sloužících ke klasifikaci ...
Smyková pevnost písku při velmi malém normálovém zatížení
Hudek, J.; Koudelka, Petr
2014 - Czech
Příspěvek se zabývá výsledky smykových zkoušek velni suchého (ideálně nesoudržného) křemičitého písku střední zrnitosti při velmi malém normálovém zatížení ve škále do 25 kPa. Výsledky srovnává se smykovými zkouškami stejného materiálu ve škále 63 – 163 kPa. Solutions of some extraordinary geotechnical problems need knowledge of shear strength in a scale of very low normal stress. An example is physical modelling of soil mass behaviour using medium or little samples. The paper deals with results of testing a very dry uniform quartz sand of medium size. Resulting values of effective shear strength for the normal stress scale till of 25 kPa are compared with former testing of the same material in other scale of 63 – 163 kPa.
Keywords:
shear strength; sand; low normal load
Fulltext is available at external website.
Smyková pevnost písku při velmi malém normálovém zatížení
Příspěvek se zabývá výsledky smykových zkoušek velni suchého (ideálně nesoudržného) křemičitého písku střední zrnitosti při velmi malém normálovém zatížení ve škále do 25 kPa. Výsledky srovnává se ...
On the modelling of compressive response of closed-cell aluminium foams under high-strain rate loading
Koudelka_ml., P.; Zlámal, Petr; Fíla, Tomáš
2014 - English
Porous metals and particularly aluminium foams are attractive materials for crash applications where constructional elements have to be able to absorb considerable amount of deformation energy while having as low weight as possible. Compressive behaviour for medium impact velocities can be experimentally assessed from a series of droptower impact tests instrumented with accelerometer and high-speed camera. However to predict such behaviour a proper modelling scheme has to be developed. In this paper droptower impact tests of Alporas aluminium foam were used for development of a material model for explicit finite element simulations of high-strain rate deformation process using LS-DYNA simulation environment. From the material models available low density foam, Fu-Chang’s foam, crushable foam and modified crushable foam models were selected for simulations using smoothed-particle hydrodynamics and solid formulations respectively. Numerical simulations were performed in order to assess constitutive parameters of these models and identify material model describing deformation behaviour of Alporas with the best accuracy.
Keywords:
aluminium foam; high strain-rate compression; finite element modelling
Fulltext is available at external website.
On the modelling of compressive response of closed-cell aluminium foams under high-strain rate loading
Porous metals and particularly aluminium foams are attractive materials for crash applications where constructional elements have to be able to absorb considerable amount of deformation energy while ...
Semiautomatic Surface Reflectance Measurement for Monitoring of Material Weathering
Kocour, Vladimír; Valach, Jaroslav
2014 - English
We present a device for measurement of surface reflectance in dependence on incidence angle and reflectance angle. This measurement enables us to quantitatively determine how much the surface is glossy or matt. The device is programmable, which enables us to choose non-equidistant steps of angles, and study special situations more in detail. It can be used for monitoring of material weathering or other types of degradation as weathering usually causes that the surface becomes more matt.
Keywords:
surface; reflectance; photometry
Fulltext is available at external website.
Semiautomatic Surface Reflectance Measurement for Monitoring of Material Weathering
We present a device for measurement of surface reflectance in dependence on incidence angle and reflectance angle. This measurement enables us to quantitatively determine how much the surface is ...
Post-critical multi-modal vibration of a continuous inverse pendulum type system
Náprstek, Jiří; Fischer, Cyril
2014 - English
Auto-parametric effects are processes endangering structures during a seismic attack. Tall structures exposed to a strong vertical component of an earthquake excitation nearby the epicenter can collapse due to auto-parametric resonance effect. Vertical and horizontal response components being independent in the linear regime get into a complex interaction due to non-linear terms in post-critical regime. Two generally different types of the post-critical regimes are presented: (i) post-critical state with possible recovery; (ii) exponentially rising horizontal response leading to a collapse. A special attention is paid to processes of transition from semi-trivial to post-critical state in case of time limited excitation period as it concerns the seismic processes. Solution method combining analytical and numerical approaches is developed and used. Its applicability and shortcomings are commented. A few hints for engineering applications are given.
Keywords:
auto-parametric systems; dynamic stability; semi-trivial solution; multi-modal vibration
Available in digital repository of the ASCR
Post-critical multi-modal vibration of a continuous inverse pendulum type system
Auto-parametric effects are processes endangering structures during a seismic attack. Tall structures exposed to a strong vertical component of an earthquake excitation nearby the epicenter can ...
Investigation of deformation behaviour of aluminium foam under high-strain rate loading and comparison with conventional energy absorbing material
Zlámal, P.; Fíla, Tomáš; Jiroušek, O.; Králík, V.
2014 - English
The aim of this study is proper description of stress-strain behaviour of the metal foam structure Alporas under high-strain rate loading. Stress-strain response of Alporas specimens is measured during an impact test using a drop tower experiment. Strain of the specimens is evaluated by two independent approaches: i) double numerical integration of acceleration data and ii) digital image correlation technique. Thus, experimental setup is equipped with triaxial accelerometer and high speed camera. Resulting stress-strain curves are compared with behaviour of polystyrene material samples (polystyrene material is commonly used as a shock absorber) obtained from the same testing procedure and with stress-strain function determined from Alporas quasi-static compression testing.
Keywords:
digital image correlation; impact test; polystyrene; metal foam
Fulltext is available at external website.
Investigation of deformation behaviour of aluminium foam under high-strain rate loading and comparison with conventional energy absorbing material
The aim of this study is proper description of stress-strain behaviour of the metal foam structure Alporas under high-strain rate loading. Stress-strain response of Alporas specimens is measured ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases