No (399)
Yes (48)
Number of found documents:
447
Published from
to
Selection process of an observation objective with respect to minimal glare level
Melich, Radek; Václavík, Jan; Žídek, Karel
2016 - English
An observation objective (OO) that will image the projection screen on the camera detector is necessary to choose in a such a way that its glare performance is traced. This objective feature is not documented by an objective supplier, therefore we design a procedure that enable us to relatively compare the objective between each other.
Keywords:
objective glare
Available at various institutes of the ASCR
Selection process of an observation objective with respect to minimal glare level
An observation objective (OO) that will image the projection screen on the camera detector is necessary to choose in a such a way that its glare performance is traced. This objective feature is not ...
Measurement attest of M0 - STM1
Lédl, Vít; Melich, Radek; Vít, Tomáš
2016 - English
Scope of the document is to provide required test results as demanded in order No 23/14 Attachment – paragraph 6 – bullet 7.
Keywords:
METIS mirror Mé - STM
Available at various institutes of the ASCR
Measurement attest of M0 - STM1
Scope of the document is to provide required test results as demanded in order No 23/14 Attachment – paragraph 6 – bullet 7.
Arc–Anode Attachment Area in DC Arc Plasma Torch at Low Pressure
Ondáč, Peter; Mašláni, Alan; Hrabovský, Milan
2016 - English
Studying the processes in the anode attachment area of a DC arc plasma torch helps to extend the lifetime of the anode, stabilize the plasma flow for plasma spraying and better understand the movement of the anode attachment. In this work, such processes were studied at low pressure, by a non-disturbing method, using a high-speed camera and a high voltage probe. We also found pressure ranges, in which the following transitions were observed: the constricted/diffuse anode attachment, and subsonic/supersonic plasma jet\n
Keywords:
Arc Plasma Torch; Arc–Anode Attachment; Low Pressure
Available at various institutes of the ASCR
Arc–Anode Attachment Area in DC Arc Plasma Torch at Low Pressure
Studying the processes in the anode attachment area of a DC arc plasma torch helps to extend the lifetime of the anode, stabilize the plasma flow for plasma spraying and better understand the movement ...
NEOSTEL Fly-Eye Optics Alignment Aid System (AAS) - design
Budasz, Jiří; Lédl, Vít; Pleštil, Jan; Steiger, Kateřina; Steiger, Lukáš; Václavík, Jan; Veselý, Martin; Vít, T.
2016 - English
The aim of this document is to describe the design of the Fly-Eye Optics Alignment Aid System.
Keywords:
laser source; Alignment; References; FEM analysis
Available at various institutes of the ASCR
NEOSTEL Fly-Eye Optics Alignment Aid System (AAS) - design
The aim of this document is to describe the design of the Fly-Eye Optics Alignment Aid System.
Infrared measurements in medium and long wavelength on COMPASS
Vondráček, Petr; Horáček, Jan; Pánek, Radomír; Gauthier, E.
2016 - English
The experimental study of radial profiles of parallel heat flux in the scrape-off layer (SOL) of the COMPASS tokamak shows a systematic discrepancy between medium (MWIR) and long (LWIR) wavelength infrared (IR) thermographic measurements. Significant temperature and heat flux overestimation is observed in the MWIR range, whilst the LWIR range is almost not affected. It is assumed to be caused by a presence of dust particles creating sub-pixel sized micro hot-spots. Significant inhomogeneity of the surface conditions across the limiter is observed, resulting in local disturbance of the derived heat flux profiles (decay length variation up to ~ few tens of percent). Influence of the inhomogeneously distributed micro hot-spots is suppressed using correction factors (the heat transmission coefficient α) for each pixel separately in the heat flux calculation. Procedure of the α coefficient estimation is described.
Keywords:
IR; MWIR; LWIR; Dust; COMPASS; SOL
Available at various institutes of the ASCR
Infrared measurements in medium and long wavelength on COMPASS
The experimental study of radial profiles of parallel heat flux in the scrape-off layer (SOL) of the COMPASS tokamak shows a systematic discrepancy between medium (MWIR) and long (LWIR) wavelength ...
METIS mirror M0 FM
Lédl, Vít; Melich, Radek; Vít, Tomáš
2016 - English
Scope of the document is to provide required test results with respect to the structure of M0 mirror, FM version. The mirror has a unique numbering M0-C19-22.
Keywords:
METSI M0 FM mirror
Available at various institutes of the ASCR
METIS mirror M0 FM
Scope of the document is to provide required test results with respect to the structure of M0 mirror, FM version. The mirror has a unique numbering M0-C19-22.
Photocatalytic Decomposition of Wastewater from the Production of Explosives
Brom, Petr; Brožek, Vlastimil; Březina, Václav; Hlína, Michal; Mastný, L.; Novák, M.
2016 - English
Water stabilized plasma generator WSP® H-500, operating on the principle of Gerdien arc was used for the photocatalytic decomposition of furazan- and picraminate-based explosives. The generator emits intensive radiation in the range of 300-660 nm, which allows not only to activate photocatalysts based on TiO2, but also other semiconductor oxides with a narrower band gap, such as tungsten oxide. The photocatalytic decomposition of sewage and slurries containing the potassium salt of 4-hydroxy-4,6-dihydro-5,7- dinitrobenzofurazane-3-oxide (KDNBF) or sodium picraminate (NaC6H4N3O5) was performed using the anatase paste and newly developed photocatalyst produced by the company Precheza a.s. The photocatalytic reactor was built using a quartz tube coil with an internal volume of 650 ml, with a nominal size of the irradiated area of 7.5 dm2 (value reduced by the area of the gaps between coil turns) to enable the flow the processing solution or suspension of up to 10 l / min. The centre of the coil is exposed to the plasma jet with the intensity\nof 80 kW; of which 15 kW is transformed into the light radiation. 11% of the radiation output was used for the presented experiments. The time of exposition was 45 mins and 20 l of solution were treated. In the case of KDNBF, 90% of the compound was decomposed. Moreover, 100% of sodium picraminate were decomposed after 15 minutes into low-molecular inorganic compounds. Advantage of the assembly is the ability to treat highly dangerous chemical compounds in a closed cycle and test selective catalyst
Keywords:
plasma generator; photocatalytic decomposition; sodium picraminate; dinitrobenzofurazane
Available at various institutes of the ASCR
Photocatalytic Decomposition of Wastewater from the Production of Explosives
Water stabilized plasma generator WSP® H-500, operating on the principle of Gerdien arc was used for the photocatalytic decomposition of furazan- and picraminate-based explosives. The generator emits ...
NEOSTEL Collimator Realization Detailed Optical Design.
Melich, Radek; Steiger, Lukáš; Václavík, Jan; Vít, T.
2016 - English
The aim of this document is to describe the optical design of the Alignment Collimator for the NEOSTEL telescope. The document describes proposed optical and mechanical design. It consists of several parts:\n• Optical design and its tolerance analysis\n• Ghost image analysis\n• Stray light analysis\n• Mechanical design and FEM analysis
Keywords:
Alignment Collimator; NEOSTEL; Optical design
Available on request at various institutes of the ASCR
NEOSTEL Collimator Realization Detailed Optical Design.
The aim of this document is to describe the optical design of the Alignment Collimator for the NEOSTEL telescope. The document describes proposed optical and mechanical design. It consists of several ...
COMPARISON OF S-CO2 POWER CYCLES FOR NUCLEAR ENERGY
Veselý, L.; Dostál, V.; Entler, Slavomír
2016 - English
The supercritical carbon dioxide (S-CO2) is a possible cooling system for the new generations of nuclear reactors and fusion reactors. The S-CO2 power cycles have several advantages over other possible coolants such as water and helium. The advantages are the compression work, which is lower than in the case of helium, near the critical point and the S-CO2 is more compact than water and helium. The disadvantage is so called Pinch point which occurs in the regenerative heat exchanger. The pinch point can be eliminated by an arrangement of the cycle or using a mixture of CO2. This paper describes the S-CO2 power cycles for nuclear fission and fusion reactors.
Keywords:
S-CO2; power cycle; fusion
Available at various institutes of the ASCR
COMPARISON OF S-CO2 POWER CYCLES FOR NUCLEAR ENERGY
The supercritical carbon dioxide (S-CO2) is a possible cooling system for the new generations of nuclear reactors and fusion reactors. The S-CO2 power cycles have several advantages over other ...
Measurement of camera spectral response
Melich, Radek; Václavík, Jan; Žídek, Karel
2016 - English
Spectral response of the camera will be measured using monochromator in conjunction with an integration sphere. Camera without objective will be placed in one port of the integrating sphere and light beam from monochromator will be fed into perpendicular port. Sensor of the camera sensor will be therefore uniformly illuminated by diffused light from monochromator. Proposed FWHM of the monochromator is 15 nm as a trade-off between light intensity provided by monochromator and deformation of spectral characteristic (Picture XY). Diameter of the integrating sphere has to be larger than 100 mm to ensure uniform illumination over sensor area.
Keywords:
Camera spectral response
Available at various institutes of the ASCR
Measurement of camera spectral response
Spectral response of the camera will be measured using monochromator in conjunction with an integration sphere. Camera without objective will be placed in one port of the integrating sphere and light ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases