Used filters (2)  Zrušit všechna omezení
Number of found documents: 14756
Published from to

Texture Spectral Similarity Criteria Comparison
Havlíček, Michal; Haindl, Michal
2023 - English
Criteria capable of texture spectral similarity evaluation are presented and compared. From the fifteen evaluated criteria, only four criteria guarantee zero or minimal spectral ranking errors. Such criteria can support texture modeling algorithms by comparing the modeled texture with corresponding synthetic simulations. Another possible application is the development of texture retrieval, classification, or texture acquisition system. These criteria thoroughly test monotonicity and mutual correlation on specifically designed extensive monotonously degrading experiments. Keywords: Texture Comparison; Texture Modeling; Texture Retrieval; Texture Classification; Texture Acquisition Fulltext is available at external website.
Texture Spectral Similarity Criteria Comparison

Criteria capable of texture spectral similarity evaluation are presented and compared. From the fifteen evaluated criteria, only four criteria guarantee zero or minimal spectral ranking errors. Such ...

Havlíček, Michal; Haindl, Michal
Ústav teorie informace a automatizace, 2023

Book of abstracts of the 1st outdoor seminar of the Department of Optical Materials: Advances in the new materials engineering and study
Buryi, Maksym; Král, Robert
2023 - English
The seminar is dedicated to the main activities of the department of Optical Materials, FZU - Institute of Physics of the Czech Academy of Sciences in the course of national and international collaborations. In particular, the advanced methods of the (nano)materials synthesis, fabrication, and characterization are presented and discussed in detail. The aim of the seminar is to establish more of the effective paths of communication and data exchange by creating and maintaining links among the teams of national and international experts in various fields of physical and chemical knowledge, both experimental and theoretical. Keywords: nanomaterials; synthesis; data exchange Fulltext is available at external website.
Book of abstracts of the 1st outdoor seminar of the Department of Optical Materials: Advances in the new materials engineering and study

The seminar is dedicated to the main activities of the department of Optical Materials, FZU - Institute of Physics of the Czech Academy of Sciences in the course of national and international ...

Buryi, Maksym; Král, Robert
Fyzikální ústav, 2023

Stereolithography for manufacturing of advanced porous solids
Drechslerová, V.; Neuhäuserová, M.; Falta, J.; Šleichrt, J.; Kytýř, Daniel
2023 - English
The aim of this paper is focused on benefits of stereolithography (SLA) technology for the fabrication of the lightweight lattice structures with potential for load-bearing function and high absorption of impact energy. SLA is an additive manufacturing technology employing the principle of liquid resins curing moderated by radiation of a wavelength from ultra-violet band where resulting material parameters are tunable by setting of the curing process. The batches of samples manufactured using three different resins were subjected to quasi-static uni-axial tensile and compression tests. Acquired data were processed to derive deformation behaviour expressed as stress-strain diagrams and fundamental material properties. Based on the knowledge obtained from the mechanical tests, the setup of the fabrication parameters, the most suitable resin for manufacturing of the lattice structures and the overall suitability of SLA technology for the fabrication of advanced porous materials, were determined. Keywords: stereolithography; advanced porous materials; quasi-static testing; resin; mechanical characteristics Available at various institutes of the ASCR
Stereolithography for manufacturing of advanced porous solids

The aim of this paper is focused on benefits of stereolithography (SLA) technology for the fabrication of the lightweight lattice structures with potential for load-bearing function and high ...

Drechslerová, V.; Neuhäuserová, M.; Falta, J.; Šleichrt, J.; Kytýř, Daniel
Ústav teoretické a aplikované mechaniky, 2023

Caves in Bohemia et Moravia Subterranea by Mauritius Vogt (1669–1730)
Rychnová, L.; Vokurka, Michal
2023 - English
The Manuscript Bohemia et Moravia Subterranea (1729) by Mauritius Vogt reflects the subterranean landscapes and underground spaces based on Athanasius Kircher’s theories. The paper analyses the application of Kirchers’s terminology to the natural phenomena from Bohemia and Moravia. Further, we focused on how Vogt worked with his sources – how far he relied on literature, correspondence, or personal experience. Keywords: Mauritius Vogt; caves; subterranean; underground; early modern period Available at various institutes of the ASCR
Caves in Bohemia et Moravia Subterranea by Mauritius Vogt (1669–1730)

The Manuscript Bohemia et Moravia Subterranea (1729) by Mauritius Vogt reflects the subterranean landscapes and underground spaces based on Athanasius Kircher’s theories. The paper analyses the ...

Rychnová, L.; Vokurka, Michal
Historický ústav, 2023

CECE 2023. 18th International Interdisciplinary Meeting on Bioanalysis
Foret, František; Lavická, Jana; Přikryl, Jan
2023 - English
This year the Proceedings included abstracts of 27 oral and 33 poster presentations. The attached conference proceedings, edited by highly cited scientists, documents the quality of the meeting. Similarly to the previous years the lectures were given by outstanding, highly cited, scientists. The list of speakers as well as more detailed information about the conference can be found on its permanent web at www.ce-ce.org. Keywords: bioanalysis; separation; biotechnology Fulltext is available at external website.
CECE 2023. 18th International Interdisciplinary Meeting on Bioanalysis

This year the Proceedings included abstracts of 27 oral and 33 poster presentations. The attached conference proceedings, edited by highly cited scientists, documents the quality of the meeting. ...

Foret, František; Lavická, Jana; Přikryl, Jan
Ústav analytické chemie, 2023

The long-term impact of energy poverty and its mitigation on educational attainment: evidence from China
Martirosyan, Yervand
2023 - English
Existing studies demonstrate the short-run connection between environmental conditions and academic performance. However, the long-term effects of exposure to adverse living conditions on academic achievement remain underexplored. This study investigates the long-term impact of energy poverty, and policy interventions aimed at alleviating it, on the academic performance of Chinese schoolchildren starting from infancy. It specifically utilizes the Huai River Policy, which provides free winter heating exclusively to northern regions in China but not to adjacent southern regions. My findings suggest a significant positive influence of winter heating on schoolchildren’s academic performance, with a more pronounced effect for children born during winter months. The insights gained from this research could inform policy debates to enhance educational outcomes and human well-being.\n Keywords: energy poverty; academic performance; climate Fulltext is available at external website.
The long-term impact of energy poverty and its mitigation on educational attainment: evidence from China

Existing studies demonstrate the short-run connection between environmental conditions and academic performance. However, the long-term effects of exposure to adverse living conditions on academic ...

Martirosyan, Yervand
Národohospodářský ústav, 2023

Statistical Approach for BTT probes distribution
Mekhalfia, Mohammed Lamine; Procházka, Pavel; Šmíd, R.; Tchawou Tchuisseu, Eder Batista
2023 - English
Blade tip timing (BTT) system is a non-invasive method used for measuring the blade tip timing of rotating machinery. The BTT system typically consists of sensor probes, signal conditioning system, and data acquisition unit. The sensor probes are placed in proximity to the rotating blade tips, Sensors measure the time at which each blade passes by the probe. By measuring the blade tip timing, the BTT system can detect changes in the blade tip vibration, which is an important for the health monitoring and performance optimization of rotating machinery [1]. To ensure accurate measurement of blade tip timing, the probe arrangement is crucial. The placement of the probe relative to the blade tips can affect the measurement accuracy, and thus, several arrangement algorithms have been developed to optimize the placement of the probes. Instead of considering the condition number, a statistical algorithms is followed to optimize the placement of probes for accurate measurement of blade tip timing in turbo-machinery. The statistical approach will be employed to determine the optimal locations for probes, with the aim of reducing errors in the measurement of blade tip timing. \n Keywords: blade tip timing principle; RMSE; blade´s dynamics Available at various institutes of the ASCR
Statistical Approach for BTT probes distribution

Blade tip timing (BTT) system is a non-invasive method used for measuring the blade tip timing of rotating machinery. The BTT system typically consists of sensor probes, signal conditioning system, ...

Mekhalfia, Mohammed Lamine; Procházka, Pavel; Šmíd, R.; Tchawou Tchuisseu, Eder Batista
Ústav termomechaniky, 2023

The design of Bayesian diagnostic expert system Querix and it’s engineering application
Věchet, Stanislav; Krejsa, Jiří; Chen, K.-S.
2023 - English
Expert systems have gained attention over the last two decades as they bring the possibility of using expert knowledge in various control systems. However, it has lost attraction in favor of artificial neural networks in recent years, which is mostly influenced by the availability of data to train neural network models and the availability of various frameworks to achieve fast time-to-market applications for given solutions. Keywords: expert system; decision making; advanced diagnostic; autonomous navigation; RPA Available at various institutes of the ASCR
The design of Bayesian diagnostic expert system Querix and it’s engineering application

Expert systems have gained attention over the last two decades as they bring the possibility of using expert knowledge in various control systems. However, it has lost attraction in favor of ...

Věchet, Stanislav; Krejsa, Jiří; Chen, K.-S.
Ústav termomechaniky, 2023

Optimization of the outflow regime in Římov reservoir from the point of view of water supply
Mercado, Ma. Cristina Paule; Hejzlar, Josef; Jarošík, Jiří; Porcal, Petr
2023 - English
The best management strategy for the Římov reservoir: (a) discharge from a depth of 3–5 m during the stratified season, (b) without support for SHP and with high reservoir filling, (c) reducing the phosphorus loading of the reservoir as much as possible. The impacts of climate change on water quality are significant, as inflow DOC and P concentrations here increase with temperature and flow variability. The effects of climate change can be mitigated by targeted management of the reservoir, but the quality of water inflow will still deteriorate further. Keywords: water; dissolved organic matter; reservoir Available at various institutes of the ASCR
Optimization of the outflow regime in Římov reservoir from the point of view of water supply

The best management strategy for the Římov reservoir: (a) discharge from a depth of 3–5 m during the stratified season, (b) without support for SHP and with high reservoir filling, (c) reducing the ...

Mercado, Ma. Cristina Paule; Hejzlar, Josef; Jarošík, Jiří; Porcal, Petr
Biologické centrum, 2023

Programs and Algorithms of Numerical Mathematics 21 : Jablonec nad Nisou, June 19-24, 2022 : Proceedings of Seminar
Chleboun, J.; Kůs, Pavel; Papež, Jan; Rozložník, Miroslav; Segeth, Karel; Šístek, Jakub
2023 - English
These proceedings contain peer-reviewed papers that are based on the invited lectures, short communications, and posters presented at the 21st seminar Programs and Algorithms of Numerical Mathematics (PANM) held in Merkur Hotel, Jablonec nad Nisou, Czech Republic, June 19-24, 2022.\nThe seminar was organized by the Institute of Mathematics of the Czech Academy of Sciences under the auspices of EU-MATHS-IN.CZ, Czech Network for Mathematics in Industry, and with the nancial support provided by the RSJ Foundation. It continued the previous seminars on mathematical software and numerical methods held (biennially, with only one exception) in Alšovice, Bratříkov, Janov nad Nisou, Kořenov, Lázně Libverda, Dolní Maxov, Prague, and Hejnice in the period 1983-2020. The objective of this series of seminars is to provide a forum for presenting and discussing advanced topics in numerical analysis, computer implementation of numerical algorithms, new approaches to mathematical modeling, and single- or multi-processor applications of computational methods. Keywords: numerical mathematics Available in digital repository of the ASCR
Programs and Algorithms of Numerical Mathematics 21 : Jablonec nad Nisou, June 19-24, 2022 : Proceedings of Seminar

These proceedings contain peer-reviewed papers that are based on the invited lectures, short communications, and posters presented at the 21st seminar Programs and Algorithms of Numerical Mathematics ...

Chleboun, J.; Kůs, Pavel; Papež, Jan; Rozložník, Miroslav; Segeth, Karel; Šístek, Jakub
Matematický ústav, 2023

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases