Investigation of Mechanical Processing of Solar Photovoltaic Panels
Šperlich, Antonín
2024 - English
This work aims to describe the possibilities of mechanical treatment of solar photovoltaic panels. In the first part, the shredding and milling process for the transformation of the product (whole panel) into material that can be further processed, was investigated. Milled material was sieved and analyzed. It was observed that this shredding also works as a selective grinding because three main products were produced. The second part of this work was aimed at the physical concentration of silver in real samples of milled solar photovoltaic panels by Knelson separator. This device (type of centrifugal separator) showed the ability to significantly increase the amount of silver in the outcome stream.
Keywords:
solar photovoltaic panels; selective milling; Knelson
Available in a digital repository NRGL
Investigation of Mechanical Processing of Solar Photovoltaic Panels
This work aims to describe the possibilities of mechanical treatment of solar photovoltaic panels. In the first part, the shredding and milling process for the transformation of the product (whole ...
Axial Dispersion and Mass Transfer in Bubble Column
Terentyak, Mark
2024 - English
The objective of the study is to experimentally investigate axial dispersion and mass transfer within a bubble column, examining their mutual interrelation\nand their correlation with operational parameters and AR1.
Keywords:
bubble column; axial dispersion; mass transfer
Available in a digital repository NRGL
Axial Dispersion and Mass Transfer in Bubble Column
The objective of the study is to experimentally investigate axial dispersion and mass transfer within a bubble column, examining their mutual interrelation\nand their correlation with operational ...
Exploring Bubble Dynamics with VOF Method Simulations: Insights from Two Fundamental Gas-Liquid Flow Case Studies
Harrandt, Václav
2024 - English
The present study focuses on the flow of Taylor bubbles, representing the interaction between the channel wall and the gas phase, and the collision of\na bubble with a vortex ring, serving as a model liquid-gas interaction. Understanding the former case can be essential to prevent the membrane\nfouling or the flow induced corrosion. The dynamics of the latter case is the predictive criterion for whether the initial mother bubble will break up into the daughter bubbles or not2 and this process can therefore be used as an idealized model of turbulent bubble flow.
Keywords:
bubble dynamics; multiphase interaction,; numerical simulation
Available in a digital repository NRGL
Exploring Bubble Dynamics with VOF Method Simulations: Insights from Two Fundamental Gas-Liquid Flow Case Studies
The present study focuses on the flow of Taylor bubbles, representing the interaction between the channel wall and the gas phase, and the collision of\na bubble with a vortex ring, serving as a model ...
The Influence of Geometric Parameters of 3D Printed Structured Beds on Hydrodynamic Characteristics of Trickle-Bed Reactor
Nyklíčková, Kateřina
2024 - English
The study examines a parametric set of POCS structures, where cubic cell is the basic element. The parameters such as strut diameter sd and cell size cs were varied1. These modifications are implemented with an emphasis on maintaining similar porosity and specific surface area for these structures.
Available in digital repository of the ASCR
The Influence of Geometric Parameters of 3D Printed Structured Beds on Hydrodynamic Characteristics of Trickle-Bed Reactor
The study examines a parametric set of POCS structures, where cubic cell is the basic element. The parameters such as strut diameter sd and cell size cs were varied1. These modifications are ...
Traffic sign data augmentation using Stable Diffusion conditioned with ControlNet
2024 -
Keywords:
data o dopravních značkách; ControlNet; model generování obrazu stabilní difúze
Available in the ZČU Library.
Traffic sign data augmentation using Stable Diffusion conditioned with ControlNet
Mobilní aplikace pro včelaře
2024 -
Keywords:
včelař; mobilní aplikace; monitorování
Available in the ZČU Library.
Mobilní aplikace pro včelaře
Stanovení ztratového součinitelé kónických redukcí ruzných rozměrů prostřednictvím numerických simulací
2024 -
Keywords:
numerická simulace; redukce; ztrátový součinitel
Available in the ZČU Library.
Stanovení ztratového součinitelé kónických redukcí ruzných rozměrů prostřednictvím numerických simulací
Neautonomní dynamické systémy a jejich aplikace
2024 -
Keywords:
dynamické systémy; neautonomní růstové modely; analýza
Available in the ZČU Library.
Neautonomní dynamické systémy a jejich aplikace
Komprese konektivity trojúhelníkovych sítí se známou geometrií s využitím neuronových sítí
2024 -
Keywords:
neuronové sítě; geometrie; konektivita trojúhelníkové sítě
Available in the ZČU Library.
Komprese konektivity trojúhelníkovych sítí se známou geometrií s využitím neuronových sítí
Approaches to the computational modelling of soft tissues related to cutting
2024 -
Keywords:
měkké tkáně; výpočetní modelování; simulace
Available in the ZČU Library.
Approaches to the computational modelling of soft tissues related to cutting
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases