Ne (10836)
Ano (1208)
Počet nalezených dokumentů:
12044
Publikováno od
do
ENHANCING WELD JOINT INTEGRITY IN S460 HIGH-STRENGTH STEEL PLATES: AN EXPERIMENTAL APPROACH
Al Khazali, Mohammad Sami; Malíková, Lucie; Křivý, V.; Seitl, Stanislav
2024 - anglický
Exploring S460 steel, this research assesses weld toe microstructure and fatigue. It finds that welding affects \nhardness of welded area and fatigue life. These insights are crucial for structural engineering, optimizing welding \npractices for longevity. \nTests confirm increased weld toe hardness correlates with fatigue resistance. This informs design strategies, \nensuring bridge safety under cyclic loads. The study advances understanding of HSS behaviour, influencing future \nwelding techniques.
Klíčová slova:
High-strength steel; weld's toe; cruciform joints; S460; fatigue behaviour
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
ENHANCING WELD JOINT INTEGRITY IN S460 HIGH-STRENGTH STEEL PLATES: AN EXPERIMENTAL APPROACH
Exploring S460 steel, this research assesses weld toe microstructure and fatigue. It finds that welding affects \nhardness of welded area and fatigue life. These insights are crucial for structural ...
Correlative probe electron microscopy analysis of plasma-treated gallium-doped zinc oxide nanorods
Rutherford, D.; Remeš, Zdeněk; Mičová, J.; Ukraintsev, E.; Rezek, B.
2024 - anglický
Correlative Probe Electron Microscopy (CPEM) was used to investigate the topographical and electronic emission properties of gallium-doped zinc oxide nanorods (ZnO:Ga) after low pressure hydrogen or oxygen plasma treatment. Simultaneous secondary electron (SE) and back-scattered electron (BSE) emission information from the same nanorods enabled true correlation with the topographical information obtained by atomic force microscopy (AFM). All nanorods were analyzed in-situ on the same substrate using the same experimental parameters which allowed for accurate comparison. ZnO:Ga nanorods displayed the largest SE emission intensity as well as the greatest BSE emission intensity. Hydrogen plasma treatment reduced both SE and BSE emission intensity, whereas oxygen plasma treatment only reduced SE emission. These effects may help elucidate various optical as well as biological interactions of ZnO:Ga nanorods.
Klíčová slova:
correlative microscopy; SEM; AFM; ZnO nanorods; plasma treatment
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Correlative probe electron microscopy analysis of plasma-treated gallium-doped zinc oxide nanorods
Correlative Probe Electron Microscopy (CPEM) was used to investigate the topographical and electronic emission properties of gallium-doped zinc oxide nanorods (ZnO:Ga) after low pressure hydrogen or ...
Epidemiologické modely s agenty
Neruda, Roman
2023 - český
Tento příspěvek je jemným úvodem do problematiky agentních modelů a jejich aplikací v epidemiologickém modelování. Představíme agentní modely jednak z hlediska informatiky, jednak jako nástroj modelování v jiných vědních disciplínách. V příkladové studii ukážeme model s agenty a sociální sítí jejich kontaktů, který slouží pro simulaci vývoje epidemie a vlivu protiepidemických opatření.
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Epidemiologické modely s agenty
Tento příspěvek je jemným úvodem do problematiky agentních modelů a jejich aplikací v epidemiologickém modelování. Představíme agentní modely jednak z hlediska informatiky, jednak jako nástroj ...
Plošné návrhové srážky v českých povodích
Müller, Miloslav; Kašpar, Marek; Hulec, Filip
2023 - český
Data o srážkové intenzitě na území Česka s horizontálním rozlišením 1 km2 a časovým krokem 10 minut, získaná adjustací radarových odhadů daty ze srážkoměrných stanic, posloužila k odvození návrhových plošných srážek v českých povodích I. až IV. řádu a v povodích útvarů povrchových vod. Při zdvojnásobení doby akumulace srážky vzroste návrhový úhrn v jednotlivých pixelech v průměru o cca 20 %. S rostoucí plochou povodí velikost návrhových úhrnů klesá, a to především v případě kratších dob akumulace. Data on rainfall intensity on the territory of the Czech Republic with a horizontal resolution of 1 km2 and a time step of 10 minutes, obtained by adjusting radar estimates with data from rain gauge stations, were used to derive design areal precipitation in the Czech river basins of 1st to 4th order and in the basins of surface water bodies. When the rainfall accumulation time is doubled, the design precipitation total in individual pixels increases by about 20% on average. The magnitude of the design totals decreases with increasing catchment area, especially for shorter accumulation periods.
Klíčová slova:
design precipitation; catchment; return period
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Plošné návrhové srážky v českých povodích
Data o srážkové intenzitě na území Česka s horizontálním rozlišením 1 km2 a časovým krokem 10 minut, získaná adjustací radarových odhadů daty ze srážkoměrných stanic, posloužila k odvození návrhových ...
Improving computational efficiency of contact solution in fully resolved CFD-DEM simulations with arbitrarily-shaped solids
Studeník, Ondřej; Kotouč Šourek, M.; Isoz, Martin
2023 - anglický
The abundance of industrial processes containing both solid and liquid phases generate demand for fully resolved models allowing for detailed analysis and optimization of these processes. An established approach providing such models is based using a variant of an immersed boundary method to couple the computational fluid dynamics (CFD) and discrete element method (DEM). In the talk, we will present our custom and monolithic implementation of a fully-resolved CFDDEM solver and concentrate on the intricacies of solving contact between two arbitrarily-shaped solids. We shall propose an efficient contact treatment based on the concept of a virtual mesh, which provides the mesh resolution required by DEM through dividing the space around the contact point in a finite volume fashion without any changes to the CFD mesh itself. A substantial part of the talk will devoted to the parallelization of the contact solution, especially in the context of the domain decomposition method imposed by the CFD solver.
Klíčová slova:
CFD; DEM; virtual mesh
Dokument je dostupný na externích webových stránkách.
Improving computational efficiency of contact solution in fully resolved CFD-DEM simulations with arbitrarily-shaped solids
The abundance of industrial processes containing both solid and liquid phases generate demand for fully resolved models allowing for detailed analysis and optimization of these processes. An ...
Ceramic protection of anti-corrosion layers of 3-glycidyloxypropyl-triethoxysilane on steel
Pokorný, P.; Prodanović, N.; Janata, Marek; Brožek, Vlastimil
2023 - anglický
There are various variations on the problem of steel reinforcement bond strength in concrete. Along with geometrical considerations, corrosion performance of steels with varying chemical compositions in interaction with variable chemical compositions of concrete are crucial. One approach is to cover steel surfaces with organosilane compounds, which increases the reinforcement resistance to corrosion in both acidic and alkaline conditions but, on the other hand, may weaken the reinforcement bond strength on concrete. The issue is resolved by intentionally forming a thin-walled, highly adhering corundum layer that is highly porous and impregnated with 3-glycidyloxypropyltriethoxysilane. This procedure also includes testing the adhesion properties between the ceramic and the metal and the cement prior to conducting a corrosion test in a chloride environment.
Klíčová slova:
steel; concrete; ceramics
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Ceramic protection of anti-corrosion layers of 3-glycidyloxypropyl-triethoxysilane on steel
There are various variations on the problem of steel reinforcement bond strength in concrete. Along with geometrical considerations, corrosion performance of steels with varying chemical compositions ...
On the development of a numerical model for the simulation of air flow in the human airways
Lancmanová, Anna; Bodnár, Tomáš; Sequeira, A.
2023 - anglický
This contribution reports on an ongoing study focusing on reduced order models for incompressible viscous fluid flow in two dimensional channels. A finite difference solver was developed using a simple implementation of the immersed boundary method to represent the channel geometry. The solver was validated for unsteady flow by comparing the obtained two-dimensional numerical solutions with analytical profiles computed from the Womersley solution. Finally the 2D model was coupled to a simple 1D extension simulating the flow in axisymmetric elastic vessel (tube). Some of the coupling principles and implementation issues are discussed in detail.
Klíčová slova:
reduced order model; incompressible Navier-Stokes equations; finite difference approximation; coupling method
Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
On the development of a numerical model for the simulation of air flow in the human airways
This contribution reports on an ongoing study focusing on reduced order models for incompressible viscous fluid flow in two dimensional channels. A finite difference solver was developed using a ...
Simulating particle-laden flows: from immersed boundaries towards model order reduction
Isoz, Martin; Kubíčková, Lucie; Kotouč Šourek, M.; Studeník, Ondřej; Kovárnová, A.
2023 - anglický
Particle-laden flow is prevalent both in nature and in industry. Its appearance ranges from the trans-port of riverbed sediments towards the magma flow, from the deposition of catalytic material inside particulate matter filters in automotive exhaust gas aftertreatment towards the slurry transport in dredging operations. In this contribution, we focus on the particle-resolved direct numerical simulation (PR-DNS) of the particle-laden flow. Such a simulation combines the standard Eulerian approach to computational fluid dynamics (CFD) with inclusion of particles via a variant of the immersed boundary method (IBM) and tracking of the particles movement using a discrete element method (DEM). Provided the used DEM allows for collisions of arbitrarily shaped particles, PR-DNS is based (almost) entirely on first principles, and as such it is a truly high-fidelity model. The downside of PR-DNS is its immense computational cost. In this work, we focus on three possibilities of alleviating the computational cost of PR-DNS: (i) replacing PR-DNS by PR-LES or PR-RANS, while the latter requires combining IBM with wall functions, (ii) improving efficiency of DEM contact solution via adaptively refined virtual mesh, and (iii) developing a method of model order reduction specifically tailored to PR-DNS of particle-laden flows.
Klíčová slova:
particle-laden flow; CFD-DEM; arbitrarily-shaped particles; finite volume method
Dokument je dostupný na externích webových stránkách.
Simulating particle-laden flows: from immersed boundaries towards model order reduction
Particle-laden flow is prevalent both in nature and in industry. Its appearance ranges from the trans-port of riverbed sediments towards the magma flow, from the deposition of catalytic material ...
On Reynolds-averaged turbulence modeling with immersed boundary method
Kubíčková, Lucie; Isoz, Martin
2023 - anglický
The immersed boundary (IB) method is an approach in the computational fluid dynamics in which complex geometry conforming meshes are replaced by simple ones and the true simulated geometry is projected onto the simple mesh by a scalar field and adjustment of governing equations. Such an approach is particularly advantageous in topology optimizations (TO) where it allows for substantial speed-up since a single mesh can be used for all the tested topologies. In our previous work, we linked our custom IB variant, the hybrid fictitious domain-immersed boundary method (HFDIB), with a TO framework and successfully carried out an optimization under laminar flow conditions. However, to allow for optimizations of reallife components, the IB approach needs to be coupled with an affordable turbulence modeling. In this contribution, we focus on extending the HFDIB approach by the possibility to perform Reynolds-averaged simulations (RAS). In particular, we implemented the k − ω turbulence model and wall functions for closure variables and velocity.
Klíčová slova:
immersed boundary; RAS; wall functions; CFD; OpenFOAM
Dokument je dostupný na externích webových stránkách.
On Reynolds-averaged turbulence modeling with immersed boundary method
The immersed boundary (IB) method is an approach in the computational fluid dynamics in which complex geometry conforming meshes are replaced by simple ones and the true simulated geometry is ...
Finite element modal analysis of a silicone vocal fold filled with fluid
Hájek, P.; Radolf, Vojtěch; Horáček, Jaromír; Švec, J. G.
2023 - anglický
A three dimensional (3D) finite element (FE) model of a silicone vocal fold (VF) filled with fluid is presented here. The silicone part of the model is based on partial differential equations of the continuum mechanics and consider large deformations. The fluid domain encapsulated in the silicone VF is defined semianalytically as a lumped-element model describing the fluid in hydrostatic conditions. The elongated and pressurized silicone VF was subjected to perturbed modal analysis. Results showed that the choice of the fluid inside the VF substantially influences the natural frequencies. Namely, the water-filling lowers the natural frequencies approximately by half over the air-filling. Besides, the procedure of reverse engineering for obtaining the geometry of the VF from already 3D-printed mold is introduced.
Klíčová slova:
perturbed modal analysis; finite element method; vocal folds; reverse engineering; biomechanics of voice
Dokument je dostupný na externích webových stránkách.
Finite element modal analysis of a silicone vocal fold filled with fluid
A three dimensional (3D) finite element (FE) model of a silicone vocal fold (VF) filled with fluid is presented here. The silicone part of the model is based on partial differential equations of the ...
NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.
Vaše náměty a připomínky posílejte na email nusl@techlib.cz
Provozovatel
Zahraniční báze