The assessment of mechanical properties of the fibleglass composite – 3B the fibreglass company, N-4760 BIRKELAND, Norway, SE 2020 1200TEX, CoA 7841810_000010 from 15.6.23, Epoxy – „Spolek pro chemickou a hutní výrobu a.s.“, CHS-EPODUR 532- 0542,CoA CA12210056,57 from 11.4.23.
Šperl, Martin; Vála, Ondřej; Bejdl, Jan; Frankeová, Dita
2023 - Czech
Investigation of basic mechanical properties of the fibreglass composite cut from special high pressure vessel. Výzkum základních mechanických vlastností skelného laminátového kompozitu vyříznutého ze speciální vysokotlaké nádoby.
Keywords:
mechanical properties; fibreglass composite
Available at various institutes of the ASCR
The assessment of mechanical properties of the fibleglass composite – 3B the fibreglass company, N-4760 BIRKELAND, Norway, SE 2020 1200TEX, CoA 7841810_000010 from 15.6.23, Epoxy – „Spolek pro chemickou a hutní výrobu a.s.“, CHS-EPODUR 532- 0542,CoA CA12210056,57 from 11.4.23.
Investigation of basic mechanical properties of the fibreglass composite cut from special high pressure vessel.
Palynologie vybraných vzorků z vrtu Dětřichov J2014 a vrtu Maletín 1
Svobodová, Marcela
2023 - Czech
Keywords:
Cenomanian; palynology; palaeoenvironment; Bohemian Cretaceous Basin
Available at various institutes of the ASCR
Palynologie vybraných vzorků z vrtu Dětřichov J2014 a vrtu Maletín 1
Final report on the MIT project no. CZ.01.1.02/0.0/0.0ú20_321/0023673
Zolotarev, Igor; Pešek, Luděk; Gabriel, Dušan; Procházka, Pavel P.
2023 - Czech
The MIT project entitled Development of a switchgear for severe conditions and reduction of risks of critical infrastructure threat was focused on research, development of optimized design and provision of configuration technology for repeated production of different variants of modular system switchgear for use in severe conditions and reduction of risks of seismic threat, to ensure the reliability of critical infrastructure. The output is to be a prototype seismically robust device with a dynamically lightweight design, high reliability of switchgear and electrical equipment assembly function, and a software application for interactive design and documentation. Projektu MPO s názvem Vývoj rozvaděče pro těžké podmínky a snížení rizik ohrožení kritické infrastruktury byl zaměřen na výzkum, vývoj optimalizované konstrukce a zajištění konfigurační technologie pro opakovanou produkci různých variant modulárního systémového rozváděče pro použití v těžkých podmínkách a snížení rizik seizmického ohrožení, pro zajištění spolehlivosti kritické infrastruktury. Výstupem má být prototyp seizmicky robustního zařízení s dynamicky odlehčené konstrukce, vysokou spolehlivostí funkce sestavy rozvaděče a elektrovýzbroje a SW aplikace pro interaktivní návrhy a dokumentaci.
Keywords:
vibration; natural frequencies; modes of vibration; seismic resistance; dynamic properties of structures
Available at various institutes of the ASCR
Final report on the MIT project no. CZ.01.1.02/0.0/0.0ú20_321/0023673
The MIT project entitled Development of a switchgear for severe conditions and reduction of risks of critical infrastructure threat was focused on research, development of optimized design and ...
SMV-2023-05: DI2023
Matějka, Milan; Krátký, Stanislav; Meluzín, Petr; Košelová, Zuzana; Chlumská, Jana; Horáček, Miroslav; Kolařík, Vladimír; Knápek, Alexandr
2023 - Czech
The research focuses on the investigation and development of precise calibration samples with relief structures. These samples are designed for calibrating parameters in scanning electron microscopes (SEM). Test patterns allow verification of the imaging quality through microscopic techniques such as overall magnification, field of view size, resolution, deformation in lateral axes, and other geometric distortions. Precision lithographic techniques and other methods derived from silicon processing technologies in the semiconductor industry are employed for sample preparation. The development has been directed towards optimizing the recording of etching masks before transferring the image onto a monocrystalline silicon substrate. Výzkum se soustředí na zkoumání a vývoj precizních kalibračních vzorků s reliéfními strukturami. Tyto vzorky jsou koncipovány pro kalibraci parametrů ve skenovacích elektronových mikroskopech (SEM). Testovací vzory umožňují ověření kvality zobrazovaní danou mikroskopickou technikou jako je celkové zvětšení, velikost zorného, rozlišení, deformace zobrazení v laterárních osách a další geometrická zkreslení. Pro přípravku jsou využívány precizní litografické techniky a další techniky vycházející z technologií zpracování křemíku z polovodičového průmyslu. Vývoj byl zaměřen na optimalizaci záznamu leptacích masek před přenosem obrazu do monokrystalické křemíkové podložky.
Keywords:
relief structure; e-beam lithography; silicon etching; microlithography
Available at various institutes of the ASCR
SMV-2023-05: DI2023
The research focuses on the investigation and development of precise calibration samples with relief structures. These samples are designed for calibrating parameters in scanning electron microscopes ...
SMV-2023-53: Morphology and diagnostics of diamond-like powders
Mika, Filip
2023 - Czech
Methodology of exact determination of elemental composition and critical dimensions of nano powders with the SEM. Vypracování metodiky přesného určení materiálů a morfologie brusných nano prášků s pomocí SEM.
Keywords:
morphology; non-charging electron microscopy; energy-filtered electron microscopy
Available at various institutes of the ASCR
SMV-2023-53: Morphology and diagnostics of diamond-like powders
Methodology of exact determination of elemental composition and critical dimensions of nano powders with the SEM.
SMV-2023-58: Design of Electron Optical Elements
Radlička, Tomáš
2023 - Czech
The contractual research covered design of new genration of secondary electron detector for the multibeam scanning electron microscope. We also calculated the electron optical properties of NiCol column with hexapole corrector of spherical aberration. V rámci smluvního výzkum byla navržená nová generace systému pro detekci sekundárních elektronů v multibeam skenovacím elektronovém mikroskopu. Dále jsme popsali optické vlastnosti NiCol tubusu s hexapolovým korektorem sférické aberace.
Keywords:
electron optical design; aberrations; resolution
Available at various institutes of the ASCR
SMV-2023-58: Design of Electron Optical Elements
The contractual research covered design of new genration of secondary electron detector for the multibeam scanning electron microscope. We also calculated the electron optical properties of NiCol ...
SMV-2023-61: Measuring systems for lithographers
Mikel, Břetislav
2023 - Czech
The contract research was focused on the development of multi-axis measuring systems using the most accurate method of measurement based on the principle of laser radiation interference. The basic reference is a laser source with a wavelength of 633 nm. Measuring systems are intended for devices requiring measurement accuracy in the order of nanometers. Smluvní výzkum byl zaměřen na vývoj víceosých odměřovacích systémů využívajících nejpřesnější způsob měření na principu interference laserového záření. Základní referencí je laserový zdroj o vlnové délce 633 nm. Odměřovací systémy jsou určeny do zařízení vyžadující přesnost měření v řádech nanometrů.
Keywords:
laser source; measurement of lenght; laser interferometry
Available at various institutes of the ASCR
SMV-2023-61: Measuring systems for lithographers
The contract research was focused on the development of multi-axis measuring systems using the most accurate method of measurement based on the principle of laser radiation interference. The basic ...
Laser ablation of calcium and aluminium atoms as a particle source for ion trap
Grim, Jakub; Pekař, Zdeněk; Pham, Minh Tuan; Číp, Ondřej
2023 - Czech
Laser ablation is an effective method for generating particles from a variety of materials, including those with high evaporation temperatures such as aluminum. The use of high-energy laser pulses enables controlled evaporation of the material and the creation of an ablation crater. Successful results have been obtained in a pilot setup for the generation of neutral calcium and aluminium atoms by laser ablation. The method is being compared with thermal resistance oven in order to optimize the prosec generation of these particles. Subsequent spectroscopic measurements on the generated atoms are performed to optimize the absorption and emission of photons for subsequent ionization in the ion trap. A study of the transitions of neutral Ca and Al atoms shows that laser ablation provides a more efficient generation of atoms with the possibility of greater control over the process. Laserová ablace je účinnou metodou pro generování částic z různých materiálů, včetně těch s vysokou teplotou vypařování, jako je hliník. Využití vysokoenergetických laserových pulsů umožňuje kontrolované odpaření materiálu a vytvoření ablačního kráteru. V pilotní sestavě pro generování neutrálních atomů vápníku a hliníku pomocí laserové ablace byly dosaženy úspěšné výsledky. Metoda je porovnávána s tepelnou píckou s cílem optimalizovat proces generování těchto částic. Následná spektroskopická měření na generovaných atomech jsou prováděna s cílem optimalizace absorpce a emise fotonů pro následnou ionizaci v iontové pasti. Studie přechodů neutrálních atomů Ca a Al ukazuje, že laserová ablace poskytuje efektivnější generaci atomů s možností větší kontroly nad tímto procesem.
Keywords:
laser ablation; ion trap; particle generation; fluorescence spectroscopy
Available at various institutes of the ASCR
Laser ablation of calcium and aluminium atoms as a particle source for ion trap
Laser ablation is an effective method for generating particles from a variety of materials, including those with high evaporation temperatures such as aluminum. The use of high-energy laser pulses ...
Analysis of secondary metabolites from Streptomyces by Raman spectroscopy in vivo
Mikulová, Adéla; Petříčková, K.; Bobek, J.; Chroňáková, Alica; Samek, Ota; Pilát, Zdeněk
2023 - Czech
The work deals with the study of Raman spectra of secondary metabolites of bacteria of the genus Streptomyces, especially polyene antifungal agents. Purified isolates and commercial standards of these compounds were used to obtain reference spectra from which spectral markers characterizing specific details of the chemical structure were derived. Verification of the observed markers was performed using in silico Raman spectra predictions. Subsequently, these findings were used for the spectroscopic characterization of the composition of secondary metabolites in vivo, directly in bacteria growing on a solid medium. The developed methodologies will help to optimize the conditions for the biotechnological production of antibiotics. Práce se zabývá studiem Ramanových spekter sekundárních metabolitů bakterií rodu Streptomyces, zejména polyenních antifungálních látek. Purifikované izoláty a komerční standardy těchto sloučenin byly využity k pořízení referenčních spekter, ze kterých byly odvozeny spektrální markery charakterizující konkrétní detaily chemické struktury. Verifikace pozorovaných markerů byla provedena pomocí predikcí Ramanových spekter in silico. Následně byly tyto poznatky využity ke spektroskopické charakterizaci složení sekundárních metabolitů in vivo, přímo v bakteriích rostoucích na pevném médiu. Vypracované metodiky pomohou optimalizovat podmínky pro biotechnologickou produkci antibiotik.
Keywords:
Raman spectroscopy; microbiology; Streptomyces; antibiotics
Available at various institutes of the ASCR
Analysis of secondary metabolites from Streptomyces by Raman spectroscopy in vivo
The work deals with the study of Raman spectra of secondary metabolites of bacteria of the genus Streptomyces, especially polyene antifungal agents. Purified isolates and commercial standards of these ...
SMV-2023-15: Development of brazed and welded joints of mechanical parts of electron microscopes
Zobač, Martin; Vlček, Ivan; Dupák, Libor; Rončák, Ján; Zobačová, Jitka
2023 - Czech
The project aimed to conduct in-depth research and development on permanent joints of metal materials using electron beam welding and vacuum brazing techniques. Additionally, the project focused on the development of thermal treatment procedures for these assemblies. As a result, specific technological procedures were established for the given assemblies. This project was a continuation of the previous development. Projekt se zaměřil na další výzkum a vývoj nerozebíratelných spojů kovových materiálů. Využíval technologii svařování elektronovým svazkem a technologii vakuového pájení, spolu s vývojem postupů pro tepelné zpracování komponent. Výsledkem projektu byly konkrétní technologické postupy vhodné pro sestavy částí elektronových mikroskopů. Tento projekt navazoval na práci provedenou v předchozích obdobích.
Keywords:
electron beam welding; vacuum brazing; electron microscopy
Available at various institutes of the ASCR
SMV-2023-15: Development of brazed and welded joints of mechanical parts of electron microscopes
The project aimed to conduct in-depth research and development on permanent joints of metal materials using electron beam welding and vacuum brazing techniques. Additionally, the project focused on ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases