Počet nalezených dokumentů: 77
Publikováno od do

Improvement of an unbaffled stirred tank mixing characteristics using variable speed impeller
Gebouský, Ondřej; Haidl, Jan; Bodnár, J.; Pivokonský, Martin
2024 - anglický
Unbaffled mixing tanks with magnetically driven impellers are increasingly used in biotechnological and pharmaceutical industries, combining the benefits of a closed, sterile environment with easy equipment cleanability. On the other hand, missing internals, such as baffles or cooling coils, have an adverse effect on the equipment mixing characteristics, namely the batch\nhomogenization time. In our previous research, we uncovered that the eccentricity and inclination of the impeller – both employed routinely to enhance the mixing characteristics of unbaffled vessels – are not fully effective in the suppression of central vortex formation resulting in the increase in the homogenization time. In this work, we propose a simple solution to counteract the central vortex formation – a periodical variation of impeller rotational speed. This approach destabilizes the central vortex, significantly reducing homogenization time while maintaining the benefits of the original unbaffled setup. This innovation can seamlessly integrate into existing industrial setups, promising efficiency gains for biotech and pharmaceutical production. Klíčová slova: unbaffled mixing tanks; variable rotational speed; vortex destabilization; mixing time improvement Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
Improvement of an unbaffled stirred tank mixing characteristics using variable speed impeller

Unbaffled mixing tanks with magnetically driven impellers are increasingly used in biotechnological and pharmaceutical industries, combining the benefits of a closed, sterile environment with easy ...

Gebouský, Ondřej; Haidl, Jan; Bodnár, J.; Pivokonský, Martin
Ústav pro hydrodynamiku, 2024

Flow simulations approach for flocculation tanks
Idžakovičová, Kristýna; Bílek, Vojtěch; Haidl, Jan; Isoz, M.; Pivokonský, Martin
2024 - anglický
Flocculation in water treatment facilities plays a key role in the separation of colloidal inorganic and organic substances. Its optimization leads to a significant increase in its efficiency and savings of operational costs. However, it is currently based on trial-and-error experimental approaches. In this contribution, we focus on flow modeling in stirred flocculation tanks that would, after coupling with a calibrated model of particle aggregation, enable simulationbased flocculation optimization. Despite the abundance of literature on stirred tank modeling, there is no universal agreement on the methodology used to describe turbulence nor on the approach to the computational mesh creation. Consequently, there is no unified methodology for simulations and their validation. To address this, we present a best-practice methodology for economical, yet reliable flow simulations in the said device. This methodology includes the choice of the turbulence model, the approach to the design of a high quality mesh suitable for arbitrary geometries, and results evaluation. It is developed based on an extensive literature review, a multitude of flow simulations using several meshes of progressively higher quality and resolution, and various strategies to converge to steady-state flow conditions. The simulation quality indicators used here involve comparison with the experimental data on fluid velocity, stirrer power output, and flow rate through the impeller zone. Additionally, the resulting flow simulation models are compared using tracer transport simulations, hinting at their potential for coupling with particle aggregation models. Klíčová slova: flocculation tank; stirring; MRF; CFD; OpenFOAM Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
Flow simulations approach for flocculation tanks

Flocculation in water treatment facilities plays a key role in the separation of colloidal inorganic and organic substances. Its optimization leads to a significant increase in its efficiency and ...

Idžakovičová, Kristýna; Bílek, Vojtěch; Haidl, Jan; Isoz, M.; Pivokonský, Martin
Ústav pro hydrodynamiku, 2024

Dynamics of surface water quality changes in model headwater areas of the Czech Republic
Fraindová, K.; Matoušková, M.; Kliment, Z.; Vlček, Lukáš; Vlach, V.; Šajnarová, L.
2023 - anglický
River headwaters have a high environmental value. Unfortunately, the biogeochemical processes in headwaters in context of different rainfall-runoff conditions and specific land cover have not been fully examined. This study focuses on changes in correlations of 16 biogeochemical parameters related to different types of rainfall-runoff events and land cover condition for eight headwater catchments in Central Europe. Multiple methods as linear regression, Spearman rank correlation, Principal Components Analysis and C/Q hysteresis loops revealed main relationships. Presence of peatlands and waterlogged spruce forests had decisive influence on the biogeochemistry (mainly for CODMn, humins, Fe, P-PO43− TP, and N-NO3−). The strongest positive correlation of organic matter (CODMn) and Fe is represented in a catchment with the largest area of damaged forest (70%), but with a smaller proportion of wetlands (8%). High flow rates influence the release of greater amounts of organic matter and N-NO3−. Klíčová slova: headwater areas; organic matter; waterlogged areas; peatbogs; raifall-runoff events; water quality; electric conductivity Dokument je dostupný na externích webových stránkách.
Dynamics of surface water quality changes in model headwater areas of the Czech Republic

River headwaters have a high environmental value. Unfortunately, the biogeochemical processes in headwaters in context of different rainfall-runoff conditions and specific land cover have not been ...

Fraindová, K.; Matoušková, M.; Kliment, Z.; Vlček, Lukáš; Vlach, V.; Šajnarová, L.
Ústav pro hydrodynamiku, 2023

Summary of the Liquid-Gas Ejector Hydraulic Behavior - Theory and Practice
Gebouský, Ondřej; Haidl, Jan
2023 - anglický
Liquid-gas ejectors (LGEs) are fascinating devices that use the kinetic energy of the liquid jet to entrain and eventually compress the gas. LGEs find applications in both industry and everyday life, e.g., as sprayers. However, a complex and reliable method for LGE design was not available in the open literature until recently. This contribution follows up on our recent works about the hydraulic behavior of LGE with undisturbed and destabilized liquid jets. This paper aims to summarize the device’s complicated hydraulics and characterize its optimal design for three industrially relevant applications - (a) LGE as the vacuum pump, (b) LGE as the gas purification equipment, and (c) LGE as the gas distributor for bioreactors. Klíčová slova: liquid-gas ejector; jet pump; design method Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
Summary of the Liquid-Gas Ejector Hydraulic Behavior - Theory and Practice

Liquid-gas ejectors (LGEs) are fascinating devices that use the kinetic energy of the liquid jet to entrain and eventually compress the gas. LGEs find applications in both industry and everyday life, ...

Gebouský, Ondřej; Haidl, Jan
Ústav pro hydrodynamiku, 2023

Dynamics of dissolved organic carbon in surface water during extreme rainfall-runoff events
Matoušková, M.; Fraindová, K.; Bejčková, M.; Kliment, Z.; Vlach, V.; Vlček, Lukáš
2023 - anglický
The release of a greater amount of natural organic matter (NOM) within climate change is registered in many catchments with peatbog areas. The aim of our research is to study the dynamics of releasing dissolved organic carbon (DOC) into surface water in headwater areas with peatbogs. DOC concentrations are analysed in relation to extreme rainfall-runoff (R-R) events and according to the hydrological preconditions of the basin. These preconditions are described using selected hydroclimatic variables (14 days before the R-R event). The source data comes from stations of the Faculty of Science, Charles University, and the Czech Hydrometeorological Institute. For the evaluation of relations and processes, the Principal component analysis (PCA), hysteresis loops or Pearson correlation coefficient was used. The lag time of DOCmax for Qmax, the dependence of DOCmax and groundwater levels were studied. The influence of flow rate on the decline and ascent phases of DOC\nconcentrations by hysteresis loops and the influence of the number of partial flow maximums on the amount of transported DOC during the R-R event was analysed. Our first results show that great influence on the dynamic of DOC concentration in surface water has the change in groundwater-levels in the peatbog and the outflow amount during the R-R event. The hydroclimatic preconditions of the basin have also a significant influence on the DOC release. Changes in concentrations during R-R events also occurred for other compounds that were studied additionally. Particularly significant was the increase in metals (mainly Fe, Al, Mn) and base cation (K) and decrease in nitrate nitrogen. Klíčová slova: natural organic matter; dissolved organic carbon; peatbog; surface water Dokument je dostupný na externích webových stránkách.
Dynamics of dissolved organic carbon in surface water during extreme rainfall-runoff events

The release of a greater amount of natural organic matter (NOM) within climate change is registered in many catchments with peatbog areas. The aim of our research is to study the dynamics of releasing ...

Matoušková, M.; Fraindová, K.; Bejčková, M.; Kliment, Z.; Vlach, V.; Vlček, Lukáš
Ústav pro hydrodynamiku, 2023

Correlation between the onset of beadless character of nanofibrous webs and rheological characteristics of electrospun polymer solutions
Zelenková, Jana; Peer, Petra; Filip, Petr
2021 - anglický
An overwhelming majority of applications of nanofibrous webs requires sufficiently smooth character of nanofibres surface. This character is apart other parameters strongly influenced by a concentration of chosen polymeric material in the solvents. Qualitative attributes roughly depend on the prepared concentration, specifically whether it belongs to one of the four basic regions: dilute, semidilute unentangled, semidilute entangled and concentrated. A concentration separating the latter two regions is often taken as a zero-th approximation indicating an onset of beadless nanofibrous webs. The present contribution uses as a more precise indicator behaviour of so-called phase angle relating viscous and elastic moduli, in other words mutual participation of viscous and elastic components. To this aim three frequently used polymers were used: copolymer of poly(vinylidene fluoride) and hexafluoropropylene (PVDF-co-HFP), poly(ethylene oxide) (PEO) and poly(vinyl butyral) (PVB). For materials exhibiting first a constant behaviour or moderate decrease in a phase angle for lower concentrations, an approximation of the starting concentration is given by a concentration value where a phase angle curve starts to decrease, apparently reflecting a more progressive viscoelastic nature. As shown, such approximation provides relatively very good approximation enabling to eliminate a traditional trial-and-error method. Klíčová slova: nanofibres; beadless morphology; PVDF-co-HFP; polymer concentration; rheology Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
Correlation between the onset of beadless character of nanofibrous webs and rheological characteristics of electrospun polymer solutions

An overwhelming majority of applications of nanofibrous webs requires sufficiently smooth character of nanofibres surface. This character is apart other parameters strongly influenced by a ...

Zelenková, Jana; Peer, Petra; Filip, Petr
Ústav pro hydrodynamiku, 2021

The importance of the radiation balance for water retention of the landscape
Kofroňová, Jitka
2018 - anglický
As part of the radiation balance, longwave radiation is one of the factors needed to estimate potential evapotranspiration (PET). Since the longwave radiation balance is rarely measured, many computational methods have been designed. In this study, we report on the difference between the observed longwave radiation balance and modelling results obtained using the two main procedures outlined in Manuals 24 and 56 of the FAO. The performance of these equations was evaluated in the warmer months (April to October) over eight years at the Liz experimental catchment in the Bohemian Forest (Czech Republic). The coefficients of both methods were also calibrated based on local conditions. Four commonly used methods were used to calculate the PET (Penman-Monteith, Pristley and Taylor, Kimberley-Penman, Thom and Oliver). The use of default coefficient values gave errors of 40 100 mm and 0 20 mm for the seasonal PET estimates for FAO56 and FAO24, respectively (the PET was usually overestimated). Parameter calibration decreased the FAO56 error to less than 20 mm per season (FAO24 remained unaffected by the calibration). The FAO56 approach with calibrated coefficients proved to be more suitable for estimation of the longwave radiation balance. Klíčová slova: water retention; radiation balance; potential evapotranspiration (PET) Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
The importance of the radiation balance for water retention of the landscape

As part of the radiation balance, longwave radiation is one of the factors needed to estimate potential evapotranspiration (PET). Since the longwave radiation balance is rarely measured, many ...

Kofroňová, Jitka
Ústav pro hydrodynamiku, 2018

Local velocity scaling in T400 vessel agitated by Rushton turbine in a fully turbulent region
Šulc, R.; Ditl, P.; Fořt, I.; Jašíková, D.; Kotek, M.; Kopecký, V.; Kysela, Bohuš
2017 - anglický
The hydrodynamics and flow field were measured in an agitated vessel using 2-D Time Resolved Particle Image Velocimetry (2-D TR PIV). The experiments were carried out in a fully baffled cylindrical flat bottom vessel 400 mm in inner diameter agitated by a Rushton turbine 133 mm in diameter. The velocity fields were measured in the zone in upward flow to the impeller for impeller rotation speeds from 300 rpm to 850 rpm and three liquids of different viscosities (i.e. (i) distilled water, ii) a 28% vol. aqueous solution of glycol, and iii) a 43% vol. aqueous solution of glycol), corresponding to the impeller Reynolds number in the range 50 000 < Re < 189 000. This Re range secures the fully-developed turbulent flow of agitated liquid. In accordance with the theory of mixing, the dimensionless mean and fluctuation velocities in the measured directions were found to be constant and independent of the impeller Reynolds number. On the basis of the test results the spatial distributions of dimensionless velocities were calculated. The axial turbulence intensity was found to be in the majority in the range from 0.388 to 0.540, which corresponds to the high level of turbulence intensity. Klíčová slova: agitated vessel; Rushton turbine; PIV Dokument je dostupný na externích webových stránkách.
Local velocity scaling in T400 vessel agitated by Rushton turbine in a fully turbulent region

The hydrodynamics and flow field were measured in an agitated vessel using 2-D Time Resolved Particle Image Velocimetry (2-D TR PIV). The experiments were carried out in a fully baffled cylindrical ...

Šulc, R.; Ditl, P.; Fořt, I.; Jašíková, D.; Kotek, M.; Kopecký, V.; Kysela, Bohuš
Ústav pro hydrodynamiku, 2017

Evaluation of the turbulent kinetic dissipation rate in an agitated vessel
Kysela, Bohuš; Konfršt, Jiří; Chára, Zdeněk; Sulc, R.; Jašíková, D.
2017 - anglický
The design of agitated tanks depends on operating conditions and processes for that are used for. An important parameter for the scale-up modelling is the dissipation rate of the turbulent kinetic energy. The dissipation rate is commonly assumed to be a function of the impeller power input. But this approach gives no information about distribution of the dissipation rate inside the agitated volume. In this paper the distributions of the dissipation rate inside the agitated vessels are estimated by evaluations of the CFD (Computational Fluid Dynamics). The results obtained from RANS (Reynolds Averaged Navier-Stokes equations) k-epsilon turbulent model and LES (Large Eddy Simulations) with Smagorinsky SGS (Sub Grid Scale) model are compared. The agitated vessels with standard geometry equipped with four baffles and stirred by either a standard Rushton turbine or a high shear impeller were investigated. The results are compared with mean dissipation rate estimated from the total impeller power input. Klíčová slova: flow; large-eddy simulation Dokument je dostupný na externích webových stránkách.
Evaluation of the turbulent kinetic dissipation rate in an agitated vessel

The design of agitated tanks depends on operating conditions and processes for that are used for. An important parameter for the scale-up modelling is the dissipation rate of the turbulent kinetic ...

Kysela, Bohuš; Konfršt, Jiří; Chára, Zdeněk; Sulc, R.; Jašíková, D.
Ústav pro hydrodynamiku, 2017

Simulation of collagen solution flow in rectangular capillary
Kysela, Bohuš; Skočilas, J.; Zitny, R.; Stancl, J.; Houska, M.; Landfeld, A.
2017 - anglický
The viscoelastic properties of foods and polymers can be evaluated from flow of the material in capillary with specified dimension and shape. The extrusion rheometer equipped by capillary with rectangular cross-section was used for determination of the rheological behaviour of water collagen solution. The measurements of the axial profiles in longitudinal direction of the total stresses at capillary wall were performed for various shear rates. The linear viscoelastic model of Oldroyd B type: White-Metzner model was used for simulation of fluid flow in OpenFOAM software package. The simulations describe the effect of relaxation time on wall total stress in convergent-divergent capillary. Klíčová slova: collagen; viscoelastic model; convergent-divergent capillary Dokument je dostupný na externích webových stránkách.
Simulation of collagen solution flow in rectangular capillary

The viscoelastic properties of foods and polymers can be evaluated from flow of the material in capillary with specified dimension and shape. The extrusion rheometer equipped by capillary with ...

Kysela, Bohuš; Skočilas, J.; Zitny, R.; Stancl, J.; Houska, M.; Landfeld, A.
Ústav pro hydrodynamiku, 2017

O službě

NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.

Vaše náměty a připomínky posílejte na email nusl@techlib.cz

Provozovatel

http://www.techlib.cz

Facebook

Zahraniční báze