No (14409)
Yes (2104)
Number of found documents:
16513
Published from
to
Modification of cooling system for laboratory measurement of rotor blade vibration
Maturkanič, Dušan; Procházka, Pavel; Hodboď, Robert; Voronova, Evgeniya; Mekhalfia, Mohammed Lamine
2024 - English
Last year, the replacement of the turbine wheel model was completed in the Laboratory of Rotational Laser Vibrometry of the Institute of Thermomechanics AS CR, v.v.i. Based on previous experience and the expected higher operating load planned for the new wheel, the cooling system was modified at the same time. The paper describes the main effort in this direction and the results that clarify the previous damage of the measuring device.
Keywords:
blade; vibration; cooling system; measurement; laboratory
Available at various institutes of the ASCR
Modification of cooling system for laboratory measurement of rotor blade vibration
Last year, the replacement of the turbine wheel model was completed in the Laboratory of Rotational Laser Vibrometry of the Institute of Thermomechanics AS CR, v.v.i. Based on previous experience and ...
DYNAMICS OF MACHINES AND MECHANICAL SYSTEMS WITH INTERACTIONS : PROCEEDINGS DYMAMESI 2024
Zolotarev, Igor; Pešek, Luděk; Kozień, M. S.
2024 - English
The aim of the DYMAMESI is to facilitate the exchange of up to date information and knowledge among specialists in structural and multibody dynamics, in coupled interacting systems as aero-elasticity, hydro-elasticity, biomechanics, systems with feedbacks and mechatronics. In 2023 will be hosted by Cracow University of Technology, Institute of Applied Mechanics, Section of Dynamics of Systems.
Keywords:
dynamics; vibrations of mechanical systems; vibrodiagnostics; energy transformations
Available at various institutes of the ASCR
DYNAMICS OF MACHINES AND MECHANICAL SYSTEMS WITH INTERACTIONS : PROCEEDINGS DYMAMESI 2024
The aim of the DYMAMESI is to facilitate the exchange of up to date information and knowledge among specialists in structural and multibody dynamics, in coupled interacting systems as aero-elasticity, ...
Stochastic version of the arc-length method
Náprstek, Jiří; Fischer, Cyril
2024 - English
The solution of a nonlinear algebraic system using the incremental method, based on pre-defined loading steps, fails in the vicinity of local extrema as well as around bifurcation points. The solution involved the derivation of the so-called ’Arc-Length’ method. Its essence lies in not incrementing the system parameter or any of the independent variables but rather the length of the response curve. The stochastic variant of this method allows for working with a system where system parameters include random imperfections. This contribution presents a variant that tracks the first two stochastic moments. Even in this simple case, interesting phenomena can be observed, such as the disappearance of the energy barrier against equilibrium jump due to random imperfections in the system.
Keywords:
random imperfection; stochastic arc-length method; continuation; numerical method
Available in digital repository of the ASCR
Stochastic version of the arc-length method
The solution of a nonlinear algebraic system using the incremental method, based on pre-defined loading steps, fails in the vicinity of local extrema as well as around bifurcation points. The solution ...
Acoustic emission methods in steel bridge degradation identification and monitoring
Šorm, Filip
2024 - English
Acoustic emission methods proved to be an effective diagnostic tool in many industrial sectors. The potential of this method in the field of steel bridge diagnostics is explored in this article. The goal is to find the most effective use of this method.
Keywords:
steel bridges; diagnostics; acoustic emission
Available in digital repository of the ASCR
Acoustic emission methods in steel bridge degradation identification and monitoring
Acoustic emission methods proved to be an effective diagnostic tool in many industrial sectors. The potential of this method in the field of steel bridge diagnostics is explored in this article. The ...
ENHANCING WELD JOINT INTEGRITY IN S460 HIGH-STRENGTH STEEL PLATES: AN EXPERIMENTAL APPROACH
Al Khazali, Mohammad Sami; Malíková, Lucie; Křivý, V.; Seitl, Stanislav
2024 - English
Exploring S460 steel, this research assesses weld toe microstructure and fatigue. It finds that welding affects \nhardness of welded area and fatigue life. These insights are crucial for structural engineering, optimizing welding \npractices for longevity. \nTests confirm increased weld toe hardness correlates with fatigue resistance. This informs design strategies, \nensuring bridge safety under cyclic loads. The study advances understanding of HSS behaviour, influencing future \nwelding techniques.
Keywords:
High-strength steel; weld's toe; cruciform joints; S460; fatigue behaviour
Available at various institutes of the ASCR
ENHANCING WELD JOINT INTEGRITY IN S460 HIGH-STRENGTH STEEL PLATES: AN EXPERIMENTAL APPROACH
Exploring S460 steel, this research assesses weld toe microstructure and fatigue. It finds that welding affects \nhardness of welded area and fatigue life. These insights are crucial for structural ...
Experimental research of mechanical and fracture-mechanical properties of P355, L360NB and 42CrMo4 steels exposed for half year in a pressurized hydrogen atmosphere
Šperl, Martin; Gajdoš, Lubomír; Šorm, Filip; Bejdl, Jan
2024 - Czech
Research of the influence of hydrogen on the mechanical and fracture mechanical properties of specific steels depending on the exposition time. Výzkum vlivu vodíku na mechanické a lomově mechanické vlastnosti daných ocelí v závislosti na čase expozice.
Keywords:
pipeline steel; hydrogen exposition; fracture toughness; notch toughness
Available at various institutes of the ASCR
Experimental research of mechanical and fracture-mechanical properties of P355, L360NB and 42CrMo4 steels exposed for half year in a pressurized hydrogen atmosphere
Research of the influence of hydrogen on the mechanical and fracture mechanical properties of specific steels depending on the exposition time.
Posouzení příčin poruch plynovodů po přimíchání vodíku do zemního plynu
Kec, J.; Šperl, Martin
2024 - Czech
This document summarizes the probabilities of pipeline failures due to hydrogen blending into natural gas. Tento dokument sumarizuje pravděpodobnosti výskytu poruch v plynovodu v důsledku přimíchávání vodíku do zemního plynu.
Keywords:
pipeline; hydrogen blending; defects; reliability
Available at various institutes of the ASCR
Posouzení příčin poruch plynovodů po přimíchání vodíku do zemního plynu
This document summarizes the probabilities of pipeline failures due to hydrogen blending into natural gas.
Correlative probe electron microscopy analysis of plasma-treated gallium-doped zinc oxide nanorods
Rutherford, D.; Remeš, Zdeněk; Mičová, J.; Ukraintsev, E.; Rezek, B.
2024 - English
Correlative Probe Electron Microscopy (CPEM) was used to investigate the topographical and electronic emission properties of gallium-doped zinc oxide nanorods (ZnO:Ga) after low pressure hydrogen or oxygen plasma treatment. Simultaneous secondary electron (SE) and back-scattered electron (BSE) emission information from the same nanorods enabled true correlation with the topographical information obtained by atomic force microscopy (AFM). All nanorods were analyzed in-situ on the same substrate using the same experimental parameters which allowed for accurate comparison. ZnO:Ga nanorods displayed the largest SE emission intensity as well as the greatest BSE emission intensity. Hydrogen plasma treatment reduced both SE and BSE emission intensity, whereas oxygen plasma treatment only reduced SE emission. These effects may help elucidate various optical as well as biological interactions of ZnO:Ga nanorods.
Keywords:
correlative microscopy; SEM; AFM; ZnO nanorods; plasma treatment
Available at various institutes of the ASCR
Correlative probe electron microscopy analysis of plasma-treated gallium-doped zinc oxide nanorods
Correlative Probe Electron Microscopy (CPEM) was used to investigate the topographical and electronic emission properties of gallium-doped zinc oxide nanorods (ZnO:Ga) after low pressure hydrogen or ...
Some modifications of the limited-memory variable metric optimization methods
Vlček, Jan; Lukšan, Ladislav
2023 - English
Several modifications of the limited-memory variable metric (or quasi-Newton) line search methods for large scale unconstrained optimization are investigated. First the block version of the symmetric rank-one (SR1) update formula is derived in a similar way as for the block BFGS update in Vlˇcek and Lukˇsan (Numerical Algorithms 2019). The block SR1 formula is then modified to obtain an update which can reduce the required number of arithmetic operations per iteration. Since it usually violates the corresponding secant conditions, this update is combined with the shifting investigated in Vlˇcek and Lukˇsan (J. Comput. Appl. Math. 2006). Moreover, a new efficient way how to realize the limited-memory shifted BFGS method is proposed. For a class of methods based on the generalized shifted economy BFGS update, global convergence is established. A numerical comparison with the standard L-BFGS and BNS methods is given.
Keywords:
unconstrained minimization; variable metric methods; limited-memory methods; variationally derived methods; arithmetic operations reduction; global convergence
Available in a digital repository NRGL
Some modifications of the limited-memory variable metric optimization methods
Several modifications of the limited-memory variable metric (or quasi-Newton) line search methods for large scale unconstrained optimization are investigated. First the block version of the symmetric ...
GA 19-07635S: Outputs and Results
Rehák, Branislav
2023 - English
This manuscript aims to deliver a survey of results obtained during the solution of the project No. GA19-07635S of the Czech Science Foundation. The timespan dedicated to the work on this project was 1.3.2019 - 30.6.2022. The main area dealt with were\nnonlinear multi-agent systems and their synchronization, further, attention was paid to some auxiliary results in the area of nonlinear observers. This Report briefly introduces the Project, provides a summary of the results obtained and also sketches an outline how these results will be applied and extended in future.
Keywords:
multi-agent systems; nonlinear multi-agent systems; synchronization
Fulltext is available at external website.
GA 19-07635S: Outputs and Results
This manuscript aims to deliver a survey of results obtained during the solution of the project No. GA19-07635S of the Czech Science Foundation. The timespan dedicated to the work on this project was ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases