Number of found documents: 690
Published from to

Tomographical investigation of the historical metal bracelets
Kumpová, Ivana; Vopálenský, Michal
2019 - Czech
The work was focused on the method definition for the investigation of historical metal artifacts employing the X-ray tomography. Two metal bracelets made of brass and plated with silver were investigated in the laboratory. The goal was to determine the technology of manufacturing and damages, possible also to visualize the silver layer. Práce byla zaměřena na vytvoření metodiky využívající rentgenové (RTG) tomografické zobrazování pro průzkumy historických artefaktů na bázi kovů. V laboratoři byly touto metodou zkoumány dva kovové náramky z mosazi s postříbřeným povrchem. Průzkum byl proveden za účelem odhalení technologie výroby a případných poškození, případně řešení napojení stříbrné vrstvy. Keywords: X-ray tomography; investigation of historical objects; metal artifacts Available at various institutes of the ASCR
Tomographical investigation of the historical metal bracelets

The work was focused on the method definition for the investigation of historical metal artifacts employing the X-ray tomography. Two metal bracelets made of brass and plated with silver were ...

Kumpová, Ivana; Vopálenský, Michal
Ústav teoretické a aplikované mechaniky, 2019

Assessment of gas pipeline reliability based on mechanical and fracture tests of pipe segments\nfrom VTL DN 500 (lane no. 41 and 56) and VTL DN 300 (lane no. 152)
Gajdoš, Lubomír; Šperl, Martin; Šorm, Filip
2019 - Czech
Determination of mechanical and fracture mechanical properties include analysis of the critical crack dimensions for specific gas pressure and pipe segment (material). Stanovení základních mechanických a lomově mechanických charakteristik s následnou analýzou kritických rozměrů trhliny pro konkrétní tlak v potrubí a trubní segment (materiál). Keywords: fracture toughness; pipeline; steel; J integral Available at various institutes of the ASCR
Assessment of gas pipeline reliability based on mechanical and fracture tests of pipe segments\nfrom VTL DN 500 (lane no. 41 and 56) and VTL DN 300 (lane no. 152)

Determination of mechanical and fracture mechanical properties include analysis of the critical crack dimensions for specific gas pressure and pipe segment (material).

Gajdoš, Lubomír; Šperl, Martin; Šorm, Filip
Ústav teoretické a aplikované mechaniky, 2019

Chemical and microstructural characterization of the plasters sampled from object in Jakubská street, Prague
Frankeová, Dita; Jurkovská, Lucie
2019 - Czech
Analysis of historical plaster and stucco samples using thermal analysis and microscopic analysis by scanning electron microscopy and SEM-EDS analysis. Rozbor vzorků historické omítky a štuku s použitím termické analýzy a mikroskopického vyšetření s využitím skenovacího elektronového mikroskopu a SEM‐EDS analýzy. Keywords: TGA; SEM/EDS; binder characterization Available at various institutes of the ASCR
Chemical and microstructural characterization of the plasters sampled from object in Jakubská street, Prague

Analysis of historical plaster and stucco samples using thermal analysis and microscopic analysis by scanning electron microscopy and SEM-EDS analysis.

Frankeová, Dita; Jurkovská, Lucie
Ústav teoretické a aplikované mechaniky, 2019

Chemical and microstructural characterization of the concrete sampled from the bridge Most Legií, Prague
Frankeová, Dita; Jurkovská, Lucie
2019 - Czech
Analysis of historical concrete samples using thermal analysis and microscopic examination by scanning electron microscope and SEM-EDS analysis. Determination of degree of concrete degradation and identification of chemical corrosion products. Rozbor vzorků historického betonu s použitím termické analýzy a mikroskopického vyšetření s využitím skenovacího elektronového mikroskopu a SEM‐EDS analýzy. Určení stupně degradace betonu a identifikace produktů chemické koroze. Keywords: TGA; SEM/EDS; binder characterization; concrete degradation Available at various institutes of the ASCR
Chemical and microstructural characterization of the concrete sampled from the bridge Most Legií, Prague

Analysis of historical concrete samples using thermal analysis and microscopic examination by scanning electron microscope and SEM-EDS analysis. Determination of degree of concrete degradation and ...

Frankeová, Dita; Jurkovská, Lucie
Ústav teoretické a aplikované mechaniky, 2019

Survey of the floor in the winter garden of the residence of the ambassador to the US
Válek, Jan; Skružná, Olga; Kozlovcev, Petr
2019 - Czech
On May 7, 2019, a survey was carried out in the winter garden of the Otto Petschek Villa, the\nresidence of the Ambassador to the USA. The aim was to clarify the distribution of metal reinforcements\nand other structural elements in the floor of the room. The survey was carried out in\ncooperation with the designer Ing. Zdeněk Rieger. Dne 7. 5. 2019 byl realizován průzkum zimní zahrady ve vile Otto Petschka, residenci velvyslance\nUSA. Cílem bylo objasnit rozložení kovových výztuží a dalších konstrukčních prvků v podlaze místnosti.\nPrůzkum byl proveden ve spolupráci s projektantem Ing. Zdeňkem Riegerem. Keywords: ground penetrating radar (GPR); location of reinforcements; radargrams Available at various institutes of the ASCR
Survey of the floor in the winter garden of the residence of the ambassador to the US

On May 7, 2019, a survey was carried out in the winter garden of the Otto Petschek Villa, the\nresidence of the Ambassador to the USA. The aim was to clarify the distribution of metal ...

Válek, Jan; Skružná, Olga; Kozlovcev, Petr
Ústav teoretické a aplikované mechaniky, 2019

Measuring the effectiveness of hydrophobizing product Nanofusion on wood – beech and oak
Machová, Dita; Zárybnická, Lucie; Majtás, Dušan
2019 - Czech
Verification of protective properties and usability of NF Protect Wood for the needs of preservation effectiveness. Moisture, vapour permeability, wettability, water absorption, colour stability were evaluated and a test in climatic chamber was performed. Ověření ochranných vlastností a použitelnosti pro potřeby památkové péče nátěrového prostředku NF Protect WOOD. Byla hodnocena navlhavost, paropropustnost, smáčivost, nasákavost, barvostálost a byla provedena klimatická degradační zkouška. Keywords: wood; hydrophobization; moisture; vapor permeability; wettability; water absorption; colour stability; climatic chamber Available at various institutes of the ASCR
Measuring the effectiveness of hydrophobizing product Nanofusion on wood – beech and oak

Verification of protective properties and usability of NF Protect Wood for the needs of preservation effectiveness. Moisture, vapour permeability, wettability, water absorption, colour stability were ...

Machová, Dita; Zárybnická, Lucie; Majtás, Dušan
Ústav teoretické a aplikované mechaniky, 2019

How to repair decayed historical timber constructions using all-wooden lap joints
Kunecký, Jiří
2019 - Czech
Most common issue when some moisture or insect- induced decay is present in historical timber structures is the use of lapped scarf joints. This technology keeps the look of the original construction, the decayed part is removed while keeping the healthy wood in the structure. The work presents the guidelines written for the purpose during four years of intensive research activities. The guidelines describe experimental results but also results of numerical and mechanical models. It is intended to be valuable for structural engineers, carpenters and workers of the cultural heritage institutes. The technology is suitable for repair of valuable historic timber structures. Nejčastější opravou při citlivých rekonstrukcích dřevěných konstrukcí je plátový spoj, který dovoluje nahradit pouze část poškozeného prvku protézou a zachovat tak maximální možné množství původního materiálu v konstrukci. Chybějící metodika pro navrhování těchto spojů byla vyvinuta v minulých čtyřech letech v rámci programu NAKI. Výsledky uvedené v metodice jsou založeny na experimentálních výsledcích, ale i na numerických a mechanických modelech. Je vhodná a srozumitelná pro statiky, tesaře i pracovníky památkových ústavů, je vhodnou referencí pro opravy cenných střešních konstrukcí památkových objektů. Obsahuje jak část návrhovou tak část prováděcí (technologickou). Keywords: timber; lapped scarf joints Available at various institutes of the ASCR
How to repair decayed historical timber constructions using all-wooden lap joints

Most common issue when some moisture or insect- induced decay is present in historical timber structures is the use of lapped scarf joints. This technology keeps the look of the original construction, ...

Kunecký, Jiří
Ústav teoretické a aplikované mechaniky, 2019

Procedures used to detect the condition of timber in historical structures
Kloiber, Michal
2019 - Czech
Within the scope of the lecture, methods of structural and technical surveys and their use were presented. The need for this kind of diagnostics, its significance for design projects, and various forms of survey outcomes were discussed, such as identification of tree species, identification of damage type, a detailed evaluation of moisture content in wood, identification of biological damage scope, and evaluation of damage degree. V rámci přednášky byly představeny metody stavebně-technických průzkumů a jejich použití. Diskutována byla potřeba diagnostiky, její význam v projektové činnosti a různá podoba výstupů průzkumů, jakými jsou např. přesná identifikace dřeviny a druhu poškození, podrobné hodnocení obsahu vlhkosti ve dřevě, identifikace rozsahu biologického napadení a posouzení stupně poškození. Keywords: timber structures; diagnostic methods; structural and technical survey Available at various institutes of the ASCR
Procedures used to detect the condition of timber in historical structures

Within the scope of the lecture, methods of structural and technical surveys and their use were presented. The need for this kind of diagnostics, its significance for design projects, and various ...

Kloiber, Michal
Ústav teoretické a aplikované mechaniky, 2019

Reconstruction of the Renaissance sand-coloured sgraffito based on the material copy
Válek, Jan; Skružná, Olga; Kozlovcev, Petr; Waisserová, J.; Wichterlová, Z.; Jiroušek, Josef
2019 - Czech
The aim of the method is to provide a methodical design for the preparation of sand made sgraffito mortar and show its use on a specific example. Cílem památkového postupu je poskytnout metodický návrh přípravy maltového doplňku pískového\nsgrafita a ukázat jeho využití na konkrétním příkladu. Keywords: renaissance sgraffito; repairs of plasters; traditional building technologies; traditional lime techniques Available in a digital repository NRGL
Reconstruction of the Renaissance sand-coloured sgraffito based on the material copy

The aim of the method is to provide a methodical design for the preparation of sand made sgraffito mortar and show its use on a specific example.

Válek, Jan; Skružná, Olga; Kozlovcev, Petr; Waisserová, J.; Wichterlová, Z.; Jiroušek, Josef
Ústav teoretické a aplikované mechaniky, 2019

Research report. Experimental study of effects of various consolidants on mechanical characteristics of historic lime render
Slížková, Zuzana
2019 - Czech
The chemical-physical properties of the historical lime render to be restored were tested and then the tests of consolidation effects using liquid consolidants based on ethyl silicate and nano-calcium dispersion were performed. The highest strengthening effect was achieved by double treatment of the render with product Remmers KSE 300 (based on ethyl silicate). Due to the required hydrophilic properties of the render after consolidation, the final treatment of the render with a nanolime suspension, eg CaLosil IP 15 or CaLoSiL E 25, was recommended. Byly zjištěny chemicko-fyzikální vlastnosti historické vápenné omítky vyžadující zpevnění a provedeny zkoušky zpevnění ethylsilikátem a nanovápennou disperzí. Nejvyššího zpevnění bylo dosaženo dvojnásobným ošetřením omítky prostředkem na bázi ethylsilikátu s koncentrací SiO2 300 g/l. Z důvodu požadovaných hydrofilních vlastností omítky bylo doporučeno finální ošetření omítky nanovápenným prostředkem, např. CaLosil IP 15 nebo CaLoSiL E 25. Keywords: historic lime mortar; consolidation; historic render; strengthening, ethylsilicate; nanolime suspension Available in a digital repository NRGL
Research report. Experimental study of effects of various consolidants on mechanical characteristics of historic lime render

The chemical-physical properties of the historical lime render to be restored were tested and then the tests of consolidation effects using liquid consolidants based on ethyl silicate and nano-calcium ...

Slížková, Zuzana
Ústav teoretické a aplikované mechaniky, 2019

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases