Test procedure - neosted SOT test bench
Pleštil, Jan; Steiger, Lukáš; Václavík, Jan; Veselý, Martin
2018 - anglický This document describes the final design of the NEOSTED SOT Test Bench, i.e. its individual components, and serves as a groundwork for the acceptance test procedure.\nThe test to be performed according to this procedure are to demonstrate the compliance of the above item to the requirements specified in the applicable document [1] as part of the overall verification program. The test results shall be collected in a Test Report. Klíčová slova: collimator; optical tests; stage; alignment Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR. Test procedure - neosted SOT test bench

This document describes the final design of the NEOSTED SOT Test Bench, i.e. its individual components, and serves as a groundwork for the acceptance test procedure.\nThe test to be performed ...

Pleštil, Jan; Steiger, Lukáš; Václavík, Jan; Veselý, Martin
Ústav fyziky plazmatu, 2018

DCTOOL-A5
Bakule, Lubomír; Papík, Martin; Rehák, Branislav
2018 - anglický DCTOOL-A5 presents draft of a manuscript, which is intended to be submitted for publication. This report presents a new method for the decentralized event-triggered control design for large-scale uncertain systems. The results are formulated and proved in terms of linear matrix inequalities. Two design problems are solved: For interconnected systems without any quantization and for interconnected systems with local logarithmic quantizers. Results are illustrated by an example. Klíčová slova: decentralized event-triggered control; networked control systems; large scale complex systems Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR. DCTOOL-A5

DCTOOL-A5 presents draft of a manuscript, which is intended to be submitted for publication. This report presents a new method for the decentralized event-triggered control design for large-scale ...

Bakule, Lubomír; Papík, Martin; Rehák, Branislav
Ústav teorie informace a automatizace, 2018

Measurements on KR-D-1 Blade Cascade
Šimurda, David; Luxa, Martin; Radnic, Tomáš; Hála, Jindřich
2018 - anglický This report contains results and evaluation of aerodynamic measurements conducted on a transonic compressor blade cascade. Klíčová slova: transonic compressor blade; aerodynamic measurements; axial compressor Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR. Measurements on KR-D-1 Blade Cascade

This report contains results and evaluation of aerodynamic measurements conducted on a transonic compressor blade cascade.

Šimurda, David; Luxa, Martin; Radnic, Tomáš; Hála, Jindřich
Ústav termomechaniky, 2018

Sparse Test Problems for Nonlinear Least Squares
Lukšan, Ladislav; Matonoha, Ctirad; Vlček, Jan
2018 - anglický This report contains a description of subroutines which can be used for testing large-scale optimization codes. These subroutines can easily be obtained from the web page http://www.cs.cas.cz/~luksan/test.html. Furthermore, all test problems contained in these subroutines are presented in the analytic form. Klíčová slova: large-scale optimization; least squares; test problems Plné texty jsou dostupné v digitálním repozitáři NUŠL Sparse Test Problems for Nonlinear Least Squares

This report contains a description of subroutines which can be used for testing large-scale optimization codes. These subroutines can easily be obtained from the web page ...

Lukšan, Ladislav; Matonoha, Ctirad; Vlček, Jan
Ústav informatiky, 2018

Problems for Nonlinear Least Squares and Nonlinear Equations
Lukšan, Ladislav; Matonoha, Ctirad; Vlček, Jan
2018 - anglický This report contains a description of subroutines which can be used for testing large-scale optimization codes. These subroutines can easily be obtained from the web page http://www.cs.cas.cz/~luksan/test.html. Furthermore, all test problems contained in these subroutines are presented in the analytic form. Klíčová slova: large-scale optimization; least squares; nonlinear equations,; test problems Plné texty jsou dostupné v digitálním repozitáři NUŠL Problems for Nonlinear Least Squares and Nonlinear Equations

This report contains a description of subroutines which can be used for testing large-scale optimization codes. These subroutines can easily be obtained from the web page ...

Lukšan, Ladislav; Matonoha, Ctirad; Vlček, Jan
Ústav informatiky, 2018

Transport and package manual - collimator
Steiger, Lukáš; Václavík, Jan
2018 - anglický The purpose of this document is to provide basic set of instructions and recommendations that allows careful transportation of the NEOSTED collimator (COL).\nBe aware that it is not purpose of this document to provide detailed description of individual parts of the COL system. If necessary all the details and proper references can be found in [AD-2] Klíčová slova: collimator; handling; TOPTEC Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR. Transport and package manual - collimator

The purpose of this document is to provide basic set of instructions and recommendations that allows careful transportation of the NEOSTED collimator (COL).\nBe aware that it is not purpose of this ...

Steiger, Lukáš; Václavík, Jan
Ústav fyziky plazmatu, 2018

Study on polishing of CaF2 plane-parallel elements
Procháska, František; Thoř, Tomáš; Šípová, Gabriela
2018 - anglický Determination of technological procedure for processing of plane-parallel and plano-convex CaF2 optical elements. That includes optical polishing as well as preparation of samples for polishing, i.e. cementing and grinding. Klíčová slova: CaF2 machining Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR. Study on polishing of CaF2 plane-parallel elements

Determination of technological procedure for processing of plane-parallel and plano-convex CaF2 optical elements. That includes optical polishing as well as preparation of samples for polishing, i.e. ...

Procháska, František; Thoř, Tomáš; Šípová, Gabriela
Ústav fyziky plazmatu, 2018

Mineralogic analyses of samples from karst sediments in Slovenia, 6. Final Report
Šťastný, Martin; Bosák, Pavel; Zupan Hajna, N.
2018 - anglický Klíčová slova: karst sediments; mineralogy; mineralogic analyses Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR. Mineralogic analyses of samples from karst sediments in Slovenia, 6. Final Report

Šťastný, Martin; Bosák, Pavel; Zupan Hajna, N.
Geologický ústav, 2018

Study on polishing of ZnSe with diamond suspension
Procháska, František; Thoř, Tomáš
2018 - anglický Observe the effect of diamond slurries as polishing element on ZnSe, i.e. observe the change of surface of ZnSe as consequence to the series of polishing with the use of mentioned diamond slurries. Klíčová slova: ZnSe polishing; Diamond polishing slurry Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR. Study on polishing of ZnSe with diamond suspension

Observe the effect of diamond slurries as polishing element on ZnSe, i.e. observe the change of surface of ZnSe as consequence to the series of polishing with the use of mentioned diamond slurries.

Procháska, František; Thoř, Tomáš
Ústav fyziky plazmatu, 2018

A limited-memory optimization method using the infinitely many times repeated BNS update and conjugate directions
Vlček, Jan; Lukšan, Ladislav
2018 - anglický Klíčová slova: Unconstrained minimization; variable metric methods; limited-memory methods; the repeated BFGS update; global convergence; numerical results Plné texty jsou dostupné v digitálním repozitáři Akademie Věd. A limited-memory optimization method using the infinitely many times repeated BNS update and conjugate directions

Vlček, Jan; Lukšan, Ladislav
Ústav informatiky, 2018