Vorticity decomposition: methods and physical aspects
Kolář, Václav
2007 - English
Je prezentován stručný přehled metod rozkladu vířivosti. Zvláštní důraz je kladen na jejich fyzikální aspekty a praktickou použitelnost. A brief survey dealing with vorticity-decomposition methods is presented. A particular emphasis is put on their physical aspects and practical applicability.
Keywords:
vorticity decomposition; flow kinematics
Available in digital repository of the ASCR
Vorticity decomposition: methods and physical aspects
Je prezentován stručný přehled metod rozkladu vířivosti. Zvláštní důraz je kladen na jejich fyzikální aspekty a praktickou použitelnost.
Effect of surfactant/counter ion ratio on durability and drag reduction effectiveness of micellar solutions
Mík, Václav; Kořenář, Josef; Myška, Jiří
2007 - English
Stáří micelárních roztoků podstatně ovlivňuje schopnost snižovat tření při turbulentním proudění v trubkách. Byl studován jednak vliv kocentrace surfaktantu a jednak vliv poměru surfaktantu a přísady upravující iontovou sílu roztoku na stupeň degradace při stárnutí micelárního roztoku. Experimenty byly provedeny s různými koncentracemi kationaktivního surfaktantu CTAB (hexadecyltrimethylamonium bromid)ve směsi s NaSal (salycilan sodný). The age of micellar solution influences substantially effectiveness of drag reduction in a turbulent flow in tubes. In this contribution are shown effects of both surfactant concentration and the ratio of the surfactant to the compound containing conter ion, and their role in degradation rate at aging.Experiments were made with different concentrations of cationic surfactant CTAB (Hexadecyltrimethyl ammonium bromide) in mixture with NaSal (Sodium salycilate).
Keywords:
Drag reduction; Surfactants
Available in digital repository of the ASCR
Effect of surfactant/counter ion ratio on durability and drag reduction effectiveness of micellar solutions
Stáří micelárních roztoků podstatně ovlivňuje schopnost snižovat tření při turbulentním proudění v trubkách. Byl studován jednak vliv kocentrace surfaktantu a jednak vliv poměru surfaktantu a přísady ...
Numerical model of the spherical particle saltation in channel with transverse tilted rough bed
Lukerchenko, Nikolay; Piatsevich, Siarhei; Chára, Zdeněk; Vlasák, Pavel
2007 - English
Článek popisuje 3D numerický model saltace kulovité částice v obdélníkovém kanále s drsným příčně skloněným dnem. Pro výpočet kolise částice se dnem byla použita stochastická metoda založená na konceptu kontaktní zóny. Jsou uvedeny příklady výpočtů ukazující, že model může být i použit pro výpočet rozdělení částic podle zrnitosti. Byl určen svazek trajektorií částic vycházející z jednoho bodu a zjištěno, že jeho osa může být pro malé a střední příčné sklony dna aproximována přímkou, jejíž úhlová odchylka závisí na sklonu dna. The paper deals with 3D numerical model of the spherical particle saltation in the rectangular channel with rough bed and the effect of lateral slope of the bed. The stochastic method based on the concept of contact zone is used for the calculation of particle-bed collision. Some examples of calculation are presented, in particular, the effect of transverse tilted bed on the particles sorting. The beams of the trajectories of particles starting saltation from one point are calculated. The centrelines of the beams can be approximated by straight lines for low and moderate values of the bed transverse slope and the angles between centrelines and the stream direction depend on the lateral slope of the bed.
Keywords:
spherical particle; saltation; transverse tilted rough bed
Available in digital repository of the ASCR
Numerical model of the spherical particle saltation in channel with transverse tilted rough bed
Článek popisuje 3D numerický model saltace kulovité částice v obdélníkovém kanále s drsným příčně skloněným dnem. Pro výpočet kolise částice se dnem byla použita stochastická metoda založená na ...
A possibility of ultrasonic method to measure flow characteristics
Chára, Zdeněk; Matoušek, Václav
2007 - Czech
Results of velocity-field measurements by the ADV (Acoustic Doppler Velocimetry) probe are presented for various geometrical arrangements (open channel flow, flow behind a rectangular cylinder, flow through a hole in a plate). The measurements are compared with those carried out simultaneously using the LDA method. V příspěvku jsou prezentovány výsledky měření rychlostního pole pomocí ultrazvukové sondy ADV (Acoustic Doppler Velocimetry) pro různá geometrická uspořádání (proudění s volnou hladinou, proudění za hranolem a proudění otvorem ve stěně). Získané výsledky jsou porovnány se současně prováděnými měřeními pomocí LDA.
Keywords:
ADV
Available in digital repository of the ASCR
A possibility of ultrasonic method to measure flow characteristics
Results of velocity-field measurements by the ADV (Acoustic Doppler Velocimetry) probe are presented for various geometrical arrangements (open channel flow, flow behind a rectangular cylinder, flow ...
Computational glaze ice accretion prediction
Hoření, Bohumír; Horák, V.
2007 - English
Příspěvek prezentuje hlavní problém pro předpověď nárůstu glazového ledu na povrchu křídla: teoretické řešení pohybu vody v tenké vrstvě na podchlazeném povrchu a postupné narůstání výšky ledu. Jsou sestaveny rovnice zachování formálně shodné jako při proudění v otevřených kanálech. Příslušné rovnice jsou řešeny pomocí diskontinuální Galarkinovy metody. The paper presents the main problem of the wing airfoil glaze ice accretion prediction: theoretical solution of the flow of a thin layer on a cold surface and gradual freezing. There are formally arranged the conservative equations using for the solution of water flow in open channels. The flux terms are evaluated using a discontinuous Galerkin method, which could be considered as a generalized finite volumes classical method.
Keywords:
glaze ice
Available in digital repository of the ASCR
Computational glaze ice accretion prediction
Příspěvek prezentuje hlavní problém pro předpověď nárůstu glazového ledu na povrchu křídla: teoretické řešení pohybu vody v tenké vrstvě na podchlazeném povrchu a postupné narůstání výšky ledu. Jsou ...
The influence of the velocity gradient on morfological properties of aggregates
Pivokonský, Martin; Kysela, Bohuš; Chára, Zdeněk
2007 - English
edním ze základních technologických procesů v praxi úpravy pitné vody je tvorba separovatelné suspenze, která je zajišťována pomocí míchání. Předmětem je studie vlivu gradientů rychlostí proudící suspenze na tvorbu agregátů. Pro měření bylo použito přirozených povrchových vod a jako destabilizačního činidla bylo použito chloridu železitého. Měření byla založena na obrazové analýze snímků získaných při experimentech v Couettově reaktoru. Z analýzy obrazu byl vyhodnocen počet částic a z plochy jednotlivých částic byl měřen nejdelší rozměr a rozměr na něho kolmý. Výsledky ukazují, jak použitý gradient rychlosti, doba vystavení agregátu rychlostnímu gradientu a distribuce rychlostí ovlivňují četnost vznikajících částic, jejich velikost a tvar. This paper summarises the preliminary results concerning an influence of the agitation conditions on the aggregation processes. The properties of formed aggregates affecting the efficiency of separation processes are studied as well. The results show that the applied velocity gradient G, the period of its action T and the distribution of velocity field in an agitated volume of water significantly influence the number of aggregates, their size and shape. Smaller and denser aggregates of a homogeneous size and more resistant to breakage are formed under a higher velocity gradient.
Keywords:
velocity gradient; aggregation; water treatment
Available in digital repository of the ASCR
The influence of the velocity gradient on morfological properties of aggregates
edním ze základních technologických procesů v praxi úpravy pitné vody je tvorba separovatelné suspenze, která je zajišťována pomocí míchání. Předmětem je studie vlivu gradientů rychlostí proudící ...
Rheological characterisation of LDPE materials by means of differential constitutive equations
Pivokonský, Radek; Zatloukal, M.; Filip, Petr
2007 - English
Pro reologický popis rozvětvených LDPE materiálů (Escorene LD165BW1 a Bralen RB0323) byly vybrány následující modely: eXtended Pom-Pom, Phan Thien-Tanner-XPP a modifikovaný Leonovův model. U obou materiálů byly proměřeny lineární viskoelastické vlastnosti, smyková a elongační viskozita. For rheological description of branched LDPE melts (Escorene LD165BW1 a Bralen RB0323) the following differential constitutive equations were used: eXtended Pom-Pom, Phan Thien-Tanner-XPP, and modified Leonov models. There was carried out quantitative and qualitative comparison of efficiency of the predictions determined by these models with the experimental data measured at 200oC. For both materials there were measured linear viscoelastic properties, shear and uniaxial extensional viscosities.
Keywords:
constitutive equations; polymer melts; shear flow; elongational flow
Available in digital repository of the ASCR
Rheological characterisation of LDPE materials by means of differential constitutive equations
Pro reologický popis rozvětvených LDPE materiálů (Escorene LD165BW1 a Bralen RB0323) byly vybrány následující modely: eXtended Pom-Pom, Phan Thien-Tanner-XPP a modifikovaný Leonovův model. U obou ...
High order geometrical and functional discretization for the Navier-Stokes equations
Hoření, Bohumír; Chára, Zdeněk
2007 - English
Příspěvek se zabývá použitelností metod vyšších řádů pro geometrické a funkcionální aproximace pro řešení Navier-Stokosových rovnic. Vhodnost navržených postupů je ukázána na vybraných příkladech. The paper deals with an applicability of high order methods for geometrical as well as functional approximations. Usefulness of this approach is demonstrated on selected examples.
Keywords:
Navier-Stokes equations
Available in digital repository of the ASCR
High order geometrical and functional discretization for the Navier-Stokes equations
Příspěvek se zabývá použitelností metod vyšších řádů pro geometrické a funkcionální aproximace pro řešení Navier-Stokosových rovnic. Vhodnost navržených postupů je ukázána na vybraných příkladech.
Numerical simulation and experimental investigation of pulsating flow
Chára, Zdeněk; Hoření, Bohumír
2007 - English
Příspěvek prezentuje výsledky numerických simulací pulzačního proudění ve vstupním úseku potrubí. Numerické simulace byly prováděny v prostředí Fluent 6.3. Simulace jsou doplněny měřeními pomocí ultrazvukové metody UVP. The contribution presents numerical as well as experimental investigations of laminar and turbulent pulsating flow in an initial part of a rigid pipe. The simulations were performed with help of Fluent 6.3. Measurements of velocity profiles were done by an ultrasound velocity monitor UVP.
Keywords:
pulsating flow
Available in digital repository of the ASCR
Numerical simulation and experimental investigation of pulsating flow
Příspěvek prezentuje výsledky numerických simulací pulzačního proudění ve vstupním úseku potrubí. Numerické simulace byly prováděny v prostředí Fluent 6.3. Simulace jsou doplněny měřeními pomocí ...
Empirical model respecting a local extreme of a course of the viscosity function
Filip, Petr; David, Jiří; Pivokonský, Radek
2007 - English
Prakticky všechny empirické modely jsou použitelné pouze pro případ monotónního průběhu viskozity. Výjimečně je možné modelovat reologicky složitější kapalinu vykazující globální extrém průběhu viskozity. Navržený 8-parametrický model umožňuje modelovat průběh viskozity i při výskytu pouze lokálního extrému. Almost all empirical models dealing with the flow curves of non- Newtonian fluids can be applied only in the case of monotonous course of these curves. Exceptionally it is possible to model viscosity behaviour of rheologically more complex materials if there appears, in the course of a flow curve, a global extreme. The 8-parameter model proposed enables a description of viscosity behaviour in dependence on shear rate or shear stress also for the case when an extreme (maximum or minimum) is only local.
Keywords:
Viscosity; Empirical model
Available in digital repository of the ASCR
Empirical model respecting a local extreme of a course of the viscosity function
Prakticky všechny empirické modely jsou použitelné pouze pro případ monotónního průběhu viskozity. Výjimečně je možné modelovat reologicky složitější kapalinu vykazující globální extrém průběhu ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases