Ne (11880)
Počet nalezených dokumentů:
11880
Publikováno od
do
Final Report of the Centre of Excellence for Nonlinear Dynamic Behaviour of Advanced Materials in Engineering
Parma, Slavomír; Gabriel, Dušan
2022 - anglický
This final report presents the CeNDYNMAT Center of Excellence, which was established at the Institute of Thermomechanics of the Czech Academy of Sciences in 2016 and ended in 2022. The report summarizes the most important scientific results of the center. It also gives an overview of the main outcomes and developments of the project, including budgeting, purchasing instrumentation, international cooperation and organization of conferences and summer courses.
Klíčová slova:
nonlinear dynamic behavior; advanced materials; metal plasticity
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Final Report of the Centre of Excellence for Nonlinear Dynamic Behaviour of Advanced Materials in Engineering
This final report presents the CeNDYNMAT Center of Excellence, which was established at the Institute of Thermomechanics of the Czech Academy of Sciences in 2016 and ended in 2022. The report ...
Problematics of aerodynamic damping calculation from measured data of 5-blade cascade
Šnábl, Pavel; Pešek, Luděk; Prasad, Chandra Shekhar; Chindada, Sony
2022 - anglický
Aerodynamic damping as a function of inter-blade phase angle (IBPA), so called S-curve, is crucial for assessment of aeroelastic stability of blade cascades, e.g. turbines, compressors, etc.\nFor constructing the S-curve, the motion-induced controlled flutter is introduced to the bladesof the cascade. As decribed in [1], two testing methods exist: aerodynamic influence coefficient\n(AIC) approach and travelling wave mode (TWM) approach. In TWM approach, all blades in a row oscillate with the same frequency and amplitude with various IBPAs. The response is\nmeasured only on the reference blade. With this approach, several measurements with different IPBAs are needed to construct the S-curve. On the other hand, AIC uses single oscillating\nblade and principle of linear superimposition of aerodynamic influence responses measured on all blades in a cascade. The result of one single measurement can be used for estimation of\naerodynamic damping for any IBPA. In the past year a new 5-blade cascade with rotating symmetrical NACA 0010 profiles was designed and built. The blades of the cascade were placed further apart and thus we are now able to reach stall flutter. Also, the suspension of the blades and sensors were significantly improved. Now, our goal is to evaluate S-curves using AIC approach for different flow conditions and oscillation frequencies.
Klíčová slova:
aerodynamic damping; S-curve; blade cascade
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Problematics of aerodynamic damping calculation from measured data of 5-blade cascade
Aerodynamic damping as a function of inter-blade phase angle (IBPA), so called S-curve, is crucial for assessment of aeroelastic stability of blade cascades, e.g. turbines, compressors, etc.\nFor ...
Interaction of triazole fungicides in agriculture
Kovač, Ishak; Jakl, M.; Šolínová, Veronika; Kašička, Václav; Jaklová Dytrtová, Jana
2022 - anglický
Klíčová slova:
capillary electrokinetic chromatography; triazole fungicides; quantitative analysis
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Interaction of triazole fungicides in agriculture
Long term optical monitoring technique of displacement fields based on ArUco markers
Kunecký, Jiří
2022 - anglický
In structural engineering it is often needed to measure tiny displacements of parts of the structure extremely precisely. For such a purpose it is often needed to use some type of sensor attached to the surface of the structure. This paper presents a new technique which simply uses computer vision libraries to measure displacement of markers originally developed for robotics. Such analysis can be under specific circumstances (2D planar movement) valid if we compare two images taken at different times with the same camera. Main advantage of this method is simplicity of use and low cost of markers, which can be printed in a standard office laser printer. The resolution (error) can be for standard cameras around 0.1 pixel. The method is especially developed for research of timber frames/joints behavior in real structures, because displacements of joints in creep or under load can reach an amplitude which is perfectly detectable by this method.
Klíčová slova:
displacement measurement; long-term monitoring; ArUco markers
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Long term optical monitoring technique of displacement fields based on ArUco markers
In structural engineering it is often needed to measure tiny displacements of parts of the structure extremely precisely. For such a purpose it is often needed to use some type of sensor attached to ...
Analysis of van der Pol equation on slow time scale for combined random and harmonic excitation
Náprstek, Jiří; Fischer, Cyril
2022 - anglický
Vortex shedding represents one of the most important processes that constantly attract the attention of experimental and theoretical research. A number of non-linear effects arise from the fluid-structure interaction. The non-stationary response in the vicinity of the lock-in region has a quasi-periodic character, beating frequency of which varies considerably with the distance from the lock-in frequency. This property is significantly affected by the assumption of combined random and harmonic excitation. This paper describes several details that contribute to the probabilistic characteristics of the system on a time-slow scale using partial response amplitudes.
Klíčová slova:
SDOF oscillator; slow-time system; Fokker-Planck equation
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Analysis of van der Pol equation on slow time scale for combined random and harmonic excitation
Vortex shedding represents one of the most important processes that constantly attract the attention of experimental and theoretical research. A number of non-linear effects arise from the ...
Construction of the Lyapunov function reflecting the physical properties of the model
Náprstek, Jiří; Fischer, Cyril
2022 - anglický
Practical experience shows that the random excitation component can affect the system response and its dynamic stability not only negatively but also positively. Such mechanisms are usually developed heuristically and are often not sufficiently justified theoretically. The paper presents a possibility of using the properties of first integrals for the construction of a Lyapunov function for the analysis of a dynamic system stability in the stochastic domain. In such case, the Lyapunov function itself contains information on the examined system and, consequently, it is able to provide a more detailed insight into the system stability properties. The procedure is illustrated by a nonlinear SDOF example.
Klíčová slova:
Lyapunov function; stability; spherical pendulum
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Construction of the Lyapunov function reflecting the physical properties of the model
Practical experience shows that the random excitation component can affect the system response and its dynamic stability not only negatively but also positively. Such mechanisms are usually developed ...
Magnetocrystalline anisotropy of Ni-Mn-Ga-Co-Cu martensite
Rameš, Michal; Straka, Ladislav; Sozinov, A.; Heczko, Oleg
2022 - anglický
The martensites of Heusler alloys based on Ni-Mn-Ga exhibit magnetically-induced reorientation resulting in giant field-induced strain. Up to 12% strain was observed in Ni-Mn-Ga-Co-Cu with 4 at.% of Co and Cu. The driving force of the phenomenon is the magnetocrystalline anisotropy. We studied evolution of the anisotropy with temperature and compositions using magnetiyation curve measurements in four different single crystalline Ni-Mn-Ga-Co-Cu and compared with non-doped Ni-Mn-Ga. The anisotropy of martensite decreases with increasing average doping (Co+Cu)/2 but it does not scale with tetragonal ratio or valence electron concentration.
Klíčová slova:
martensite; magnetocrystalline anisotropy; Heusler alloys; Ni-Mn-Ga
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Magnetocrystalline anisotropy of Ni-Mn-Ga-Co-Cu martensite
The martensites of Heusler alloys based on Ni-Mn-Ga exhibit magnetically-induced reorientation resulting in giant field-induced strain. Up to 12% strain was observed in Ni-Mn-Ga-Co-Cu with 4 at.% of ...
Aerodynamic Measurements on Transonic Compressor Blade Cascades KR-D-5 and KR-D-6
Šimurda, David; Hála, Jindřich; Luxa, Martin
2022 - anglický
This report contains results and evaluation of aerodynamic measurements conducted on two variant transonic compressor blade cascades with MCA profile (KR-D-5) and DCA profile (KR-D-6).
Klíčová slova:
compressor blade cascade; experiment; transonic flow; MCA profile; DCA profile
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Aerodynamic Measurements on Transonic Compressor Blade Cascades KR-D-5 and KR-D-6
This report contains results and evaluation of aerodynamic measurements conducted on two variant transonic compressor blade cascades with MCA profile (KR-D-5) and DCA profile (KR-D-6).
Topical Problems of Fluid Mechanics 2022
Šimurda, David; Bodnár, T.
2022 - anglický
Proceedings consist of papers presented during the conference Topical Problems of Fluid Mechanics 2022. \n
Klíčová slova:
experimental fluid mechanics; mathematical modelling; CFD; turbulence; stratified fluid; multiphase flow; vortex structures; supersonic flow
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Topical Problems of Fluid Mechanics 2022
Proceedings consist of papers presented during the conference Topical Problems of Fluid Mechanics 2022. \n
Analysis, separation and characterization of dityrosine diastereomers by capillary electrophoresis
Šolínová, Veronika; Niederhafner, Petr; Šafařík, Martin; Šebestík, Jaroslav; Kašička, Václav
2022 - anglický
Klíčová slova:
capillary electrophoresis; diastereomer separation; dityrosine
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Analysis, separation and characterization of dityrosine diastereomers by capillary electrophoresis
NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.
Vaše náměty a připomínky posílejte na email nusl@techlib.cz
Provozovatel
Zahraniční báze