Optimizing and Evaluating the Biocompatibility of Fiber Composites with CaP Additives
Suchý, Tomáš; Sucharda, Zbyněk; Balík, Karel; Sochor, M.; Bačáková, Lucie
2010 - anglický
Composite materials based on a polyamide fabric (aramid) and a polydymethyl-siloxane (PDMS) matrix were designed for application in bone surgery. In order to increase the bioactivity, 2, 5, 10, 15, 20 and 25 vol. % of nano/micro hydroxyapatite (HA) and tricalcium phosphate (TCP) were added. The effect of the additives on the biocompatibility was studied. It appears that nano additives have a more favorable effect than micro particles on mechanical properties. For final application of the composites as substitutes for bone tissues, 15 vol. % of nano hydroxyapatite additives is an optimum amount: in this case both the mechanical properties and the biological properties are optimized without distinct changes in the inner structure of the composite.
Klíčová slova:
biocomposites; calcium phosphate; polyamide fibers; polydimethylsiloxane
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Optimizing and Evaluating the Biocompatibility of Fiber Composites with CaP Additives
Composite materials based on a polyamide fabric (aramid) and a polydymethyl-siloxane (PDMS) matrix were designed for application in bone surgery. In order to increase the bioactivity, 2, 5, 10, 15, 20 ...
The use of mixed waste polymers in thermal treatment with brown coal
Kříž, Vlastimil; Bičáková, Olga; Machač, P.
2010 - anglický
Samples of brown coal from Jiří Mine alone and its mixtures with waste plastics were gasified on a laboratory scale. Using a thermal-degratation module, inserted in the stream of volatile products of pyrolysis and gasification, energetic gas with with higher hydrogen content was obtained.
Klíčová slova:
brown coal; waste polymers; gasification
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
The use of mixed waste polymers in thermal treatment with brown coal
Samples of brown coal from Jiří Mine alone and its mixtures with waste plastics were gasified on a laboratory scale. Using a thermal-degratation module, inserted in the stream of volatile products of ...
Indirect stress measurement by static vertical pendulum
Kalenda, Pavel; Neumann, L.; Wandrol, I.
2009 - anglický
Static pendulums were used for indirect stress measurement in Bohemian Massif. The anomalous tilt and/or noise were recognised before the biggest earthquakes on the Euroasian lithospheric plate. The Kurile EQ (24.11.2008) was predicted a day advance.
Klíčová slova:
stress; earthquake; pendulum
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Indirect stress measurement by static vertical pendulum
Static pendulums were used for indirect stress measurement in Bohemian Massif. The anomalous tilt and/or noise were recognised before the biggest earthquakes on the Euroasian lithospheric plate. The ...
Biocompatibility optimization of fabric composites by calcium phosphates
Sochor, M.; Balík, Karel; Suchý, Tomáš; Sucharda, Zbyněk
2009 - anglický
Composite materials based on a polyamide fabric and a polydimethylsiloxane matrix were designed for application in bone surgery. In order to increase the bioactivity, 2, 5, 10, 15, 20 and 25 vol. % of nano/micro hydroxyapatite and tricalcium phosphate were added. The effect of the additives on the mechanical properties was studied. Simultaneously, changes in the inner structure of the composites were investigated by means of image analysis.
Klíčová slova:
polydimethylsiloxane; aramid; hydroxyapatite
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Biocompatibility optimization of fabric composites by calcium phosphates
Composite materials based on a polyamide fabric and a polydimethylsiloxane matrix were designed for application in bone surgery. In order to increase the bioactivity, 2, 5, 10, 15, 20 and 25 vol. % of ...
Particulate composites based on nano HA/TCP particles for bone graft replacements
Suchý, Tomáš; Rýglová, Šárka; Balík, Karel; Sucharda, Zbyněk; Denk, F.
2009 - anglický
Particulate composite materials have been developed for applications in the form of an intervertebral cage (for use in spine treatment). The intervertebral cage is composed of a bearing cage made of PEEK and a composite core with the surface contacting the bone surface and ensuring elastic linkage of two vertebral bodies, resulting in good adhesion to the bone. Mechanical analysis of different kinds of particulate composites was performed. The effect of hydroxyapatite and tri-calcium phosphate nanofiller volume fractions on the mechanical properties of particulate composites was investigated.
Klíčová slova:
hydroxyapatite; tricalcium phosphate; particulate composite
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Particulate composites based on nano HA/TCP particles for bone graft replacements
Particulate composite materials have been developed for applications in the form of an intervertebral cage (for use in spine treatment). The intervertebral cage is composed of a bearing cage made of ...
Bioinspired nanocomposite structures for bone tissue regeneration with gelatin nanofibres
Šupová, Monika; Hrušková, Daniela; Sucharda, Zbyněk; Svobodová, J.
2009 - anglický
The aims of this work has been the preparation of bioinspired composite materials composed of gelatin matrix, gelatin nanofibers and hydroxyapaptite powder and verifying the influence of nanofibers on the mechanical properties of the composites. Cílem této práce bylo připravit biologicky inspirovaný kompozitní materiál složený z želatinové matrice, želatinových nanovláken a z nanočástic hydroxyapatitu a ověření vlivu nanovláken na mechanické vlastnosti kompozitu.
Klíčová slova:
composite; gelatin; hydroxyapatite
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Bioinspired nanocomposite structures for bone tissue regeneration with gelatin nanofibres
The aims of this work has been the preparation of bioinspired composite materials composed of gelatin matrix, gelatin nanofibers and hydroxyapaptite powder and verifying the influence of nanofibers on ...
Composite material based on aramid fibers and polysiloxane matrix modified by ydroxapatite nanoparticles
Sochor, M.; Balík, Karel; Suchý, Tomáš; Sucharda, Zbyněk; Černý, Martin
2008 - anglický
This study is aimed at verification of influence of hydroxyapatite nanoparticles additives, commonly used to improve the bioactivity of implants, on mechanical properties (namely ultimate strength in bending and modulus of elasticity in bending) of composite material potentially applicable in the bone surgery. Tato studie si klade za cíl ověření vlivu nanočásticového hydroxyaptitu, jako bioaktivní příměsi matrice, na mechanické vlastnosti (jmenovitě pevnost v ohybu a ohybový modul pružnosti) kompozitního materiálu perspektivně použitelného v kostní chirurgii.
Klíčová slova:
composite material; hydroxyapatite; mechanical behavior
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Composite material based on aramid fibers and polysiloxane matrix modified by ydroxapatite nanoparticles
This study is aimed at verification of influence of hydroxyapatite nanoparticles additives, commonly used to improve the bioactivity of implants, on mechanical properties (namely ultimate strength in ...
Continuous pyrolysis of carbonaceous materials with model gasification of the solid product
Kříž, Vlastimil; Káš, Václav; Brožová, Zuzana
2008 - anglický
Samples of lignite from Jiří Mine alone and its mixtures (30%) with waste tire-rubber, Forsan (ABS) and cellulose were pyrolyzed on a rotary kiln at a temperature of 900°C. The solid product was gasified by steam and carbon dioxide. Vzorky samotného hnědého uhlí z dolu Jiří a jeho směsi (30%) s pneu-pryží, Forsanem (ABS), a celulózou byly pyrolyzovány v rotační peci při teplotě 900°C. Tuhý produkt byl zplyňován vodní parou a oxidem uhličitým.
Klíčová slova:
rotary kiln; pyrolysis; coal
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Continuous pyrolysis of carbonaceous materials with model gasification of the solid product
Samples of lignite from Jiří Mine alone and its mixtures (30%) with waste tire-rubber, Forsan (ABS) and cellulose were pyrolyzed on a rotary kiln at a temperature of 900°C. The solid product was ...
Uppermost crust S-wave velocities from surface waves generated by M4.1 earthquake in Lubin, Poland
Řezba, Karel; Kolínský, Petr
2008 - anglický
Rayleigh waves generated by rockburst in Lubin is studied. S-wave velocity model is estimated, using program SVAL. Studujeme Rayleighovy vlny generované zemětřesením v Lubinu. Za použití programu SVAL je vypočten model rychlostí S vln.
Klíčová slova:
rayleigh wave; group velocity dispersion curves; rockburst
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Uppermost crust S-wave velocities from surface waves generated by M4.1 earthquake in Lubin, Poland
Rayleigh waves generated by rockburst in Lubin is studied. S-wave velocity model is estimated, using program SVAL....
Collision movements detected in Sudeten Marginal Fault zone, Bohemian Massif
Stemberk, Josef; Košťák, Blahoslav; Cacoń, S.
2008 - anglický
Results of monitoring of active fault movements are discussed.
Klíčová slova:
active tectonics; fault displacements; monitoring
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Collision movements detected in Sudeten Marginal Fault zone, Bohemian Massif
Results of monitoring of active fault movements are discussed.
NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.
Vaše náměty a připomínky posílejte na email nusl@techlib.cz
Provozovatel
Zahraniční báze