Ne (7633)
Ano (1654)
Počet nalezených dokumentů:
9287
Publikováno od
do
On the structure and values of betweenness centrality in dense betweenness-uniform graphs
Ghanbari, B.; Hartman, David; Jelínek, V.; Pokorná, Aneta; Šámal, R.; Valtr, P.
2023 - anglický
Betweenness centrality is a network centrality measure based on the amount of shortest paths passing through a given vertex. A graph is betweenness-uniform (BUG)if all vertices have an equal value of betweenness centrality. In this contribution, we focus on betweenness-uniform graphs with betweenness centrality below one. We disprove a conjecture about the existence of a BUG with betweenness value α for any rational numberαfrom the interval (3/4,∞) by showing that only very few betweenness centrality values below 6/7 are attained for at least one BUG. Furthermore, among graphs with diameter at least three, there are no betweenness-uniform graphs with a betweenness centrality smaller than one. In graphs of smaller diameter, the same can be shown under a uniformity condition on the components of the complement.
Klíčová slova:
betweenness; graphs
Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
On the structure and values of betweenness centrality in dense betweenness-uniform graphs
Betweenness centrality is a network centrality measure based on the amount of shortest paths passing through a given vertex. A graph is betweenness-uniform (BUG)if all vertices have an equal value of ...
Adaptation of methods for cyclo-stationary processes for noisy structural health data
Fischer, Cyril; Bayer, Jan; Náprstek, Jiří; Urushadze, Shota
2023 - anglický
In structural health analysis, various techniques, including indirect measurement via monitoring vehicles, often yield data with significant randomness and insufficient frequency separation. Conversely, the desired attributes under scrutiny are periodic in nature. Thus, methodologies designed to identify cyclo-stationary properties within noisy data can be adapted for such scenarios, assuming an adequate length of the recorded data.
Klíčová slova:
data analysis; cyclo-stationary processes; structural health monitoring
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Adaptation of methods for cyclo-stationary processes for noisy structural health data
In structural health analysis, various techniques, including indirect measurement via monitoring vehicles, often yield data with significant randomness and insufficient frequency separation. ...
Consistency of mathematical and experimental model of the autoparametric system
Fischer, Cyril; Náprstek, Jiří
2023 - anglický
This paper presents a long-overdue comparison of data obtained from experimental investigation of a spherical vibration absorber with the results of two mathematical models of the motion of a heavy sphere in a spherical surface. It shows that the danger posed by the potentially unstable self-parametric nature of the mathematical system is not too great in the case of realistic configurations, and that the values of the parameters describing the realistic structures remain within intervals corresponding to the stable behaviour of the absorber.
Klíčová slova:
vibration absorber; rolling sphere; spherical surface; autoparametric system; structural health monitoring
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Consistency of mathematical and experimental model of the autoparametric system
This paper presents a long-overdue comparison of data obtained from experimental investigation of a spherical vibration absorber with the results of two mathematical models of the motion of a heavy ...
Comparison of finite element simulation of tungsten nanoindentation with Berkovich and conical indenter
Fiala, L.; Ballo, I.; Kovář, J.; Fuis, Vladimír
2023 - anglický
Finite Element Method (FEM) was used to study the difference between using Berkovich and conical indenters in nanoindentation test of tungsten specimen. The study was aimed to determine the\nmodulus of elasticity of a tested specimen and how it changes with different indenter. The FEM analysis also revealed that the modulus of elasticity was sensitive to the dimensions of both specimen and the indenter for which were made several numerical calculations with different dimensions.
Klíčová slova:
nanoindentation; FEM; Berkovich indenter; conical indenter; tungsten
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Comparison of finite element simulation of tungsten nanoindentation with Berkovich and conical indenter
Finite Element Method (FEM) was used to study the difference between using Berkovich and conical indenters in nanoindentation test of tungsten specimen. The study was aimed to determine the\nmodulus ...
Mechanical properties of basalt: a study on compressive loading at different strain rates using SHPB
Falta, J.; Krčmářová, N.; Fíla, T.; Vavro, Martin; Vavro, Leona
2023 - anglický
This article focuses on the mechanical properties of basalt in compressive loading at different strain-rates. The study employs advanced instrumentation for the evaluation of the results in dynamic conditions, while standard uni-axial loading device is used for evaluation in quasi-static conditions. Basalt specimens were subjected to four different loading-rates from 200–600 s−1 on which the stress-strain dependence was evaluated together with DIC analysis of crack initiation and disintegration process. Understanding the mechanical properties of basalt can provide insights for engineers and designers in creating structures that are durable and able to withstand different loading conditions. The findings of this study can have implications for a wide range of industries, including aerospace, automotive, and construction, among others.
Klíčová slova:
SHPB; basalt; compressive loading; dynamic loading
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Mechanical properties of basalt: a study on compressive loading at different strain rates using SHPB
This article focuses on the mechanical properties of basalt in compressive loading at different strain-rates. The study employs advanced instrumentation for the evaluation of the results in dynamic ...
Asynchronous time integration while achieving zero interface energy
Dvořák, Radim; Kolman, Radek; Falta, J.; Neühauserová, M.
2023 - anglický
This contribution deals with an asynchronous direct time integration of the finite-element model. The proposed method is applied to the phenomenon of wave propagation through an elastic linear continuum. The numerical model is partitioned into individual subdomains using the domain decomposition method by means of localized Lagrange multipliers. For each subdomain, different time discretizations are used. No restrictions for relation between subdomain’s time steps are imposed. The coupling of the subdomains is forced by an acceleration continuity condition. Additionally, we use the a posteriori technique to also provide the displacement and velocity continuity at the interfaces, and hence we obtain exact continuity of all three kinematic fields. The proposed method is experimentally validated using the modified SHPB (split Hopkinson pressure bar) setup.
Klíčová slova:
finite element method; direct time integration; asynchronous integration; domain decomposition; localized lagrange multipliers
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Asynchronous time integration while achieving zero interface energy
This contribution deals with an asynchronous direct time integration of the finite-element model. The proposed method is applied to the phenomenon of wave propagation through an elastic linear ...
Optical and Pneumatic Measurements on TR-U-11 Cascade
Luxa, Martin; Hála, Jindřich; Šimurda, David
2023 - anglický
The report contains results and evaluation of conducted optical (interferometry and schlieren technique) and pneumatic measurements on the first variant of the new tip section, intended for turbine rotor blade.
Klíčová slova:
transonic flow; rotor turbine blade; tip section
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Optical and Pneumatic Measurements on TR-U-11 Cascade
The report contains results and evaluation of conducted optical (interferometry and schlieren technique) and pneumatic measurements on the first variant of the new tip section, intended for turbine ...
Ambiguity in Stochastic Optimization Problems with Nonlinear Dependence on a Probability Measure via Wasserstein Metric
Kaňková, Vlasta
2023 - anglický
Many economic and financial applications lead to deterministic optimization problems depending on a probability measure. It happens very often (in applications) that these problems have to be solved on the data base. Point estimates of an optimal value and estimates of an optimal solutionset can be obtained by this approach. A consistency, a rate of convergence and normal properties, of these estimates, have been discussed (many times) not only under assumptions of independent data corresponding to the distributions with light tails, but also for weak dependent data and the distributions with heavy tails. However, it is also possible to estimate (on the data base) a confidence intervals and bounds for the optimal value and the optimal solutions. To analyze this approach we focus on a special case of static problems depending nonlineary on the probability measure. Stability results based on the Wasserstein metric and the Valander approach will be employed for the above mentioned analysis.
Klíčová slova:
Stochastic optimization problems; static problems; empirical measure; point estimates; interval estimates; nonlinear dependence
Dokument je dostupný na externích webových stránkách.
Ambiguity in Stochastic Optimization Problems with Nonlinear Dependence on a Probability Measure via Wasserstein Metric
Many economic and financial applications lead to deterministic optimization problems depending on a probability measure. It happens very often (in applications) that these problems have to be solved ...
NANOCERIA PREPARED BY ELECTRON BEAM EVAPORATION
Pizúrová, Naděžda; Hlaváček, Antonín; Kavčiaková, Zuzana; Roupcová, Pavla; Kuběna, Ivo; Buršík, Jiří; Sokovnin, S. Y.
2023 - anglický
Cerium oxide nanoparticles (nanoceria) are currently one of the most investigated nanomaterials because of their attractive properties used in biomedical applications, catalysis, fuel cells, and many others. These attractive properties are connected with the Ce3+ and Ce4+ valency state ratio. In the nanoparticle form, cerium oxides contain a mixture of Ce3+ and Ce4+ on the nanoparticle surfaces. Switching between these two states requires oxygen vacancies. Therefore, nanoceria's inherent ability to act as an antioxidant in an environmentally-dependent manner and a “redox switch” to confer auto-regenerating capabilities by automatically shifting between Ce4+ and Ce3+ oxidation states is significantly affected by surface morphology. Regarding this demanded behavior, we aimed to characterize synthesized nanoparticle surface quality and its influence on the cerium oxidation states. The received results were used to evaluate the synthesis method's suitability for suggested utilization. We used nanoparticles prepared by electron beam evaporation. This unique physical method includes nanoparticle creation through the fast cooling process followed by breaking radiation damaging nanoparticle surfaces to create surface off-stoichiometry. We prepared a sample containing clusters of a mixture of ultra-small nanoparticles and approximately 100 nm particles. X-ray diffraction confirmed the CeO2 phase in both components. To extract the finest component, we used centrifugal size fractionation. We received 200 nm clusters of 2-10 nm nanoparticles. Nanoparticle shapes and facet types were analyzed using transmission electron microscopy methods. We found out most nanoparticles were formed with truncated octahedrons containing {1,1,1} and {1,0,0} facet types and truncated cuboctahedrons containing {1,1,1}, {1,0,0}, and additional {1,1,0} facets. No octahedron (without truncation) containing only {1,1,1} facets was observed. Nanoparticle shapes containing {1,1,0} and {1,0,0} are suitable for redox activity. Some amount of irregular shapes, beneficial for redox activity, was also observed. Spectroscopy methods confirmed Ce3+ content.
Klíčová slova:
Ce3+ and Ce4+; electron beam evaporation; facet types; hrtem; Nanoceria
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
NANOCERIA PREPARED BY ELECTRON BEAM EVAPORATION
Cerium oxide nanoparticles (nanoceria) are currently one of the most investigated nanomaterials because of their attractive properties used in biomedical applications, catalysis, fuel cells, and many ...
A new blade cascade for flutter studies
Šnábl, Pavel; Pešek, Luděk; Procházka, Pavel P.; Skála, V.
2023 - anglický
In this paper, a new blade cascade, developed in the Institute of Thermomechanics, is presented. The geometry of the cascade was modified so now the stall flutter can occur. It has some major construction improvements over the original cascade which now allow more precise and reliable measurements. The stability of the new blade cascade with five NACA 0010 profiles with rotational degree of freedom is assessed by Travelling Wave Mode approach and Aerodynamic Influence Coefficient approach.
Klíčová slova:
blade cascade; stability; travelling wave mode; aerodynamic influence coefficient
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
A new blade cascade for flutter studies
In this paper, a new blade cascade, developed in the Institute of Thermomechanics, is presented. The geometry of the cascade was modified so now the stall flutter can occur. It has some major ...
NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.
Vaše náměty a připomínky posílejte na email nusl@techlib.cz
Provozovatel
Zahraniční báze