Used filters (3)  Zrušit všechna omezení
Number of found documents: 2929
Published from to

Cultivation of Limnospira maxima and utilization of its fresh biomass in human nutrition
Vásquez, Claudia
2023 - English
This work aims to enhance productivity, efficiency and sustainability of L. maxima cultivation as well as to determine the safe microbiological conditions for the nutritional use of fresh spirulina biomass. Various parameters such as light intensity, light spectral composition, temperature, pH, CO2, and culture media composition can be optimized. A series of experiments were performed to find the most suitable configuration to cultivate L. maxima, defined by cyanobacterium productivity and yield as well as other metabolites production such as phycocyanin (C-PC) and carotenoids. Keywords: Limnospira maxima; fresh biomass; human nutrition Available in a digital repository NRGL
Cultivation of Limnospira maxima and utilization of its fresh biomass in human nutrition

This work aims to enhance productivity, efficiency and sustainability of L. maxima cultivation as well as to determine the safe microbiological conditions for the nutritional use of fresh spirulina ...

Vásquez, Claudia
Ústav chemických procesů, 2023

Organic fluorine content and change during thermal treatmen
Hušek, Matěj
2023 - English
We have previously described how pyrolysis affected the content of selected PFAS representatives.4,5 However, we could not determine with certainty whether they were merely cleaved or mineralised. Therefore, we focused on the change in organic fluorine content (part of PFAS) and analysed its thermal behaviour in inert (sea sand) and heterogeneous (sewage sludge) material. Keywords: organic fluorine; sewage sludge; thermal treatment Available in a digital repository NRGL
Organic fluorine content and change during thermal treatmen

We have previously described how pyrolysis affected the content of selected PFAS representatives.4,5 However, we could not determine with certainty whether they were merely cleaved or mineralised. ...

Hušek, Matěj
Ústav chemických procesů, 2023

Separation of exosomes from polydisperse suspension in microfluidic devices
Paříková, Anna
2023 - English
The work included fine-tuning the experimental methodology, writing an in-house code for exosome tracking based on a one-way\napproach, and performing a parametric study to investigate the separation potential of the microdevice as a function of channel geometry, flow rate, and viscosity. Preliminary results show that viscoelasticmicrofluidics can be used as an alternative to conventional e xosome separation techniques. Keywords: separation techniques; exosomes; microfluidic devices Available in a digital repository NRGL
Separation of exosomes from polydisperse suspension in microfluidic devices

The work included fine-tuning the experimental methodology, writing an in-house code for exosome tracking based on a one-way\napproach, and performing a parametric study to investigate the separation ...

Paříková, Anna
Ústav chemických procesů, 2023

HIGHLY-TIME RESOLVED ELEMENTAL SOURCE APPORTIONMENT OF PM2.5 AT AN URBAN TRAFFIC SITE IN PRAGUE
Windell, Laurence Christian; Pokorná, Petra; Ondráček, Jakub; Schwarz, Jaroslav; Lhotka, Radek; Vodička, Petr; Zíková, Naděžda; Hopke, P.K.; Ždímal, Vladimír
2023 - English
This work aims to quantify metal emissions from traffic at an urban traffic site in Prague, Czech Republic, identify key tracers of emissions, and investigate exhaust and non-exhaust emissions observable in fine particulate matter (PM2.5). This project signifies the first high-time resolution elemental analysis of Prague aerosols. Keywords: source apportionment; traffic; online Available in a digital repository NRGL
HIGHLY-TIME RESOLVED ELEMENTAL SOURCE APPORTIONMENT OF PM2.5 AT AN URBAN TRAFFIC SITE IN PRAGUE

This work aims to quantify metal emissions from traffic at an urban traffic site in Prague, Czech Republic, identify key tracers of emissions, and investigate exhaust and non-exhaust emissions ...

Windell, Laurence Christian; Pokorná, Petra; Ondráček, Jakub; Schwarz, Jaroslav; Lhotka, Radek; Vodička, Petr; Zíková, Naděžda; Hopke, P.K.; Ždímal, Vladimír
Ústav chemických procesů, 2023

INFLUENCE OF RESPIRATORY TRACT CONDITIONS ON PARTICLE SIZE DISTRIBUTIONS GENERATED BY COMMERCIALLY AVAILABLE INHALERS
Mašková, Ludmila; Ždímal, Vladimír; Ondráček, Jakub
2023 - English
Pressurized metered dose inhalers (MDI) and dry powder inhalers (DPI) are an integral part of the treatment of lung diseases such as asthma and chronic obstructive pulmonary disease (COPD) (Vichrow et al., 2008). An important characteristic of particles dosed by MDI and DPI is particle size distribution (PSD) (Byron, 1990). This may vary depending on the formulation, but also on the temperature and relative humidity (RH) changes during the transport from the inhaler to the human respiratory tract. The aim of this study was to determine the influence of RH and inspiratory flow rates on the PSD\ncharacteristics and predict deposition efficiency of inhalable particles in the lungs. Keywords: number size distribution; inhaler; hygroscopicity Available in a digital repository NRGL
INFLUENCE OF RESPIRATORY TRACT CONDITIONS ON PARTICLE SIZE DISTRIBUTIONS GENERATED BY COMMERCIALLY AVAILABLE INHALERS

Pressurized metered dose inhalers (MDI) and dry powder inhalers (DPI) are an integral part of the treatment of lung diseases such as asthma and chronic obstructive pulmonary disease (COPD) (Vichrow et ...

Mašková, Ludmila; Ždímal, Vladimír; Ondráček, Jakub
Ústav chemických procesů, 2023

ON OUR RECENT WORK IN STUDYING NEW PARTICLE FORMATION (NPF)
Kovářík, Jiří; Špalová, Anna; Roztočil, Petr; Zíková, Naděžda; Schwarz, Jaroslav; Ždímal, Vladimír
2023 - English
New particle formation (NPF) is increasingly gaining attention since it emerged roughly twenty years ago as a field of interest within the aerosol science. It studies the transition process between gas phase molecules, forming clusters and eventually becoming aerosol particles. Thus, this field is a multidisciplinary one, ranging from meteorology, atmospheric chemistry and physics, all the way through physical chemistry towards chemistry and physics of aerosols. \nRecent development of instrumentation techniques allows measuring of sub-5 nm particles and molecule clusters, neutral and also charged ones. Therefore, modern analytical methods based on these measurements are often used for NPF studies. Keywords: atmospheric aerosols; new particle formation; NAIS Available in a digital repository NRGL
ON OUR RECENT WORK IN STUDYING NEW PARTICLE FORMATION (NPF)

New particle formation (NPF) is increasingly gaining attention since it emerged roughly twenty years ago as a field of interest within the aerosol science. It studies the transition process between ...

Kovářík, Jiří; Špalová, Anna; Roztočil, Petr; Zíková, Naděžda; Schwarz, Jaroslav; Ždímal, Vladimír
Ústav chemických procesů, 2023

GA 19-07635S: Outputs and Results
Rehák, Branislav
2023 - English
This manuscript aims to deliver a survey of results obtained during the solution of the project No. GA19-07635S of the Czech Science Foundation. The timespan dedicated to the work on this project was 1.3.2019 - 30.6.2022. The main area dealt with were\nnonlinear multi-agent systems and their synchronization, further, attention was paid to some auxiliary results in the area of nonlinear observers. This Report briefly introduces the Project, provides a summary of the results obtained and also sketches an outline how these results will be applied and extended in future. Keywords: multi-agent systems; nonlinear multi-agent systems; synchronization Fulltext is available at external website.
GA 19-07635S: Outputs and Results

This manuscript aims to deliver a survey of results obtained during the solution of the project No. GA19-07635S of the Czech Science Foundation. The timespan dedicated to the work on this project was ...

Rehák, Branislav
Ústav teorie informace a automatizace, 2023

Improving computational efficiency of contact solution in fully resolved CFD-DEM simulations with arbitrarily-shaped solids
Studeník, Ondřej; Kotouč Šourek, M.; Isoz, Martin
2023 - English
The abundance of industrial processes containing both solid and liquid phases generate demand for fully resolved models allowing for detailed analysis and optimization of these processes. An established approach providing such models is based using a variant of an immersed boundary method to couple the computational fluid dynamics (CFD) and discrete element method (DEM). In the talk, we will present our custom and monolithic implementation of a fully-resolved CFDDEM solver and concentrate on the intricacies of solving contact between two arbitrarily-shaped solids. We shall propose an efficient contact treatment based on the concept of a virtual mesh, which provides the mesh resolution required by DEM through dividing the space around the contact point in a finite volume fashion without any changes to the CFD mesh itself. A substantial part of the talk will devoted to the parallelization of the contact solution, especially in the context of the domain decomposition method imposed by the CFD solver. Keywords: CFD; DEM; virtual mesh Fulltext is available at external website.
Improving computational efficiency of contact solution in fully resolved CFD-DEM simulations with arbitrarily-shaped solids

The abundance of industrial processes containing both solid and liquid phases generate demand for fully resolved models allowing for detailed analysis and optimization of these processes. An ...

Studeník, Ondřej; Kotouč Šourek, M.; Isoz, Martin
Ústav termomechaniky, 2023

On the development of a numerical model for the simulation of air flow in the human airways
Lancmanová, Anna; Bodnár, Tomáš; Sequeira, A.
2023 - English
This contribution reports on an ongoing study focusing on reduced order models for incompressible viscous fluid flow in two dimensional channels. A finite difference solver was developed using a simple implementation of the immersed boundary method to represent the channel geometry. The solver was validated for unsteady flow by comparing the obtained two-dimensional numerical solutions with analytical profiles computed from the Womersley solution. Finally the 2D model was coupled to a simple 1D extension simulating the flow in axisymmetric elastic vessel (tube). Some of the coupling principles and implementation issues are discussed in detail. Keywords: reduced order model; incompressible Navier-Stokes equations; finite difference approximation; coupling method Available in digital repository of the ASCR
On the development of a numerical model for the simulation of air flow in the human airways

This contribution reports on an ongoing study focusing on reduced order models for incompressible viscous fluid flow in two dimensional channels. A finite difference solver was developed using a ...

Lancmanová, Anna; Bodnár, Tomáš; Sequeira, A.
Matematický ústav, 2023

Simulating particle-laden flows: from immersed boundaries towards model order reduction
Isoz, Martin; Kubíčková, Lucie; Kotouč Šourek, M.; Studeník, Ondřej; Kovárnová, A.
2023 - English
Particle-laden flow is prevalent both in nature and in industry. Its appearance ranges from the trans-port of riverbed sediments towards the magma flow, from the deposition of catalytic material inside particulate matter filters in automotive exhaust gas aftertreatment towards the slurry transport in dredging operations. In this contribution, we focus on the particle-resolved direct numerical simulation (PR-DNS) of the particle-laden flow. Such a simulation combines the standard Eulerian approach to computational fluid dynamics (CFD) with inclusion of particles via a variant of the immersed boundary method (IBM) and tracking of the particles movement using a discrete element method (DEM). Provided the used DEM allows for collisions of arbitrarily shaped particles, PR-DNS is based (almost) entirely on first principles, and as such it is a truly high-fidelity model. The downside of PR-DNS is its immense computational cost. In this work, we focus on three possibilities of alleviating the computational cost of PR-DNS: (i) replacing PR-DNS by PR-LES or PR-RANS, while the latter requires combining IBM with wall functions, (ii) improving efficiency of DEM contact solution via adaptively refined virtual mesh, and (iii) developing a method of model order reduction specifically tailored to PR-DNS of particle-laden flows. Keywords: particle-laden flow; CFD-DEM; arbitrarily-shaped particles; finite volume method Fulltext is available at external website.
Simulating particle-laden flows: from immersed boundaries towards model order reduction

Particle-laden flow is prevalent both in nature and in industry. Its appearance ranges from the trans-port of riverbed sediments towards the magma flow, from the deposition of catalytic material ...

Isoz, Martin; Kubíčková, Lucie; Kotouč Šourek, M.; Studeník, Ondřej; Kovárnová, A.
Ústav termomechaniky, 2023

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases