Ne (6380)
Ano (956)
Počet nalezených dokumentů:
7336
Publikováno od
do
Ceramic protection of anti-corrosion layers of 3-glycidyloxypropyl-triethoxysilane on steel
Pokorný, P.; Janata, Marek; Brožek, Vlastimil
2023 - anglický
There are various variations on the problem of steel reinforcement bond strength in concrete. Along with geometrical considerations, corrosion performance of steels with varying chemical compositions in interaction with variable chemical compositions of concrete are crucial. One approach is to cover steel surfaces with organosilane compounds, which increases the reinforcement resistance to corrosion in both acidic and alkaline conditions but, on the other hand, may weaken the reinforcement bond strength on concrete. The issue is resolved by intentionally forming a thin-walled, highly adhering corundum layer that is highly porous and impregnated with 3-glycidyloxypropyltriethoxysilane. This procedure also includes testing the adhesion properties between the ceramic and the metal and the cement prior to conducting a corrosion test in a chloride environment.
Klíčová slova:
ceramic protection; 3-glycidyloxypropyl-triethoxysilane; steel
Dokument je dostupný na externích webových stránkách.
Ceramic protection of anti-corrosion layers of 3-glycidyloxypropyl-triethoxysilane on steel
There are various variations on the problem of steel reinforcement bond strength in concrete. Along with geometrical considerations, corrosion performance of steels with varying chemical compositions ...
Enhanced growth rate of diamond films at low temperature in focused microwave plasma system
Babčenko, Oleg; Bydžovská, Irena; Fait, Jan; Shagieva, Ekaterina; Ondič, Lukáš; Kromka, Alexander
2023 - anglický
The low temperature (< 500 °C) diamond film deposition on fused silica in two different focused microwave plasma systems, i.e. a multimode clamshell cavity (MCC) and a rotational ellipsoid cavity (REC) reactor, was investigated. During the experiments, the methane to hydrogen ratio, in the hydrogen-rich process gas mixture, varied from 1 % to 15 % for MCC and from 1 % to 9 % for REC. The grown films were analyzed by scanning electron microscopy and Raman shift measurements. The outcomes of the study and enhanced diamond growth at low temperatures is advantageous for overcoating of fused silica as well as thermally sensitive substrates, e.g. optical elements, photonic crystals, sensors, etc.
Klíčová slova:
well-faceted diamonds; low temperature deposition; high growth rate; low non-diamond content; focused plasma
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Enhanced growth rate of diamond films at low temperature in focused microwave plasma system
The low temperature (...
Determination of the initial stress tensor from deformation of underground opening-theoretical background and applications
Malík, Josef; Kolcun, Alexej
2023 - anglický
In this paper a method for the detection of initial stress tensor is proposed. The method is based on measuring distances between some pairs of points located on the wall of underground opening in the excavation process. This methods is based on the solution of eighteen auxiliary problems in the theory of elasticity with force boundary conditions. The optimal location of the pairs of points on the wall of underground work is studied. The pairs must be located so that the condition number of a certain matrix has the minimal value, which guarantees a reliable estimation of initial stress tensor.
Klíčová slova:
initial stress tensor; first boundary value problem of the theory of elasticity; condition number of matrices
Dokument je dostupný na externích webových stránkách.
Determination of the initial stress tensor from deformation of underground opening-theoretical background and applications
In this paper a method for the detection of initial stress tensor is proposed. The method is based on measuring distances between some pairs of points located on the wall of underground opening in the ...
Self-balancing of vertical disc rotors supported by contactless bearings
Zapoměl, Jaroslav; Kozánek, Jan; Košina, Jan
2023 - anglický
Article discusses the self-balancing of the vertical disc rotors supported by contactless bearings on principle of diamagnetic levitation. There are three possibilities of contactless supports: permanent magnet levitation with the help of bismuth, graphite and pyrolitic graphite.
Klíčová slova:
self balancing; vertical disc rotors; contactless bearings
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Self-balancing of vertical disc rotors supported by contactless bearings
Article discusses the self-balancing of the vertical disc rotors supported by contactless bearings on principle of diamagnetic levitation. There are three possibilities of contactless supports: ...
Dynamics of a cantilever beam with piezoelectric sensor: Finite element modeling
Cimrman, Robert; Kolman, Radek; Musil, Ladislav; Kotek, Vojtěch; Kylar, Jaromír
2023 - anglický
An elastodynamical model of a cantilever beam coupled with a piezoelectric sensor is introduced and its discretization using the finite element method is presented. The mathematical model includes additional terms that enforce the floating potential boundary condition for keeping a constant charge on an electrode of the sensor. The behaviour of the model is illustrated using a numerical example corresponding to an experimental setup, where vibrations of the beam and the potential on the sensor are measured.
Klíčová slova:
finite element method; piezo-electricity; floating potential; dynamic simulation
Dokument je dostupný na externích webových stránkách.
Dynamics of a cantilever beam with piezoelectric sensor: Finite element modeling
An elastodynamical model of a cantilever beam coupled with a piezoelectric sensor is introduced and its discretization using the finite element method is presented. The mathematical model includes ...
Effect of the long-term storage methods on the stability of cartilage biomechanical parameters
Žaloudková, Blanka; Sekorová, Š.; Kopecká, B.; Kytýř, Daniel
2023 - anglický
Long-term stability of the tissue product in terms of mechanical parameters is a key factor for its expiration date. For the investigation of storage effects on the cartilage tissues the experimental mechanical loading test combined with XCT scanning for the irregular shape inspection was performed. The samples were preserved according to three different protocols using the deep-freezing and two types of saline solution preservation. The stability of the biomechanical parameters was tested within annual intervals. All samples were subjected to uni-axial compression loading using the in-house developed compact table top loading device in displacement-driven mode. Based on the measurements, the results are represented in the form of stress-strain curves and quantified as elastic modulus and ultimate compression stress. It can be concluded that no significant difference was found in neither the mechanical properties of the samples nor in the effects of each preservational method.
Klíčová slova:
stability study; cartilage; biomechanical characterisation; compression loading; XCT imaging
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Effect of the long-term storage methods on the stability of cartilage biomechanical parameters
Long-term stability of the tissue product in terms of mechanical parameters is a key factor for its expiration date. For the investigation of storage effects on the cartilage tissues the experimental ...
Damage detection study for a pedestrian cable-stayed bridge using ANSYS
Bayer, Jan; Kawulok, Marek; Urushadze, Shota
2023 - anglický
In connection to development of new testing techniques for bridges at ITAM, a theoretical damage detection case study was performed for a cable stayed bridge over the Vltava River at Lužec. The results recognise the most susceptible loading modes which should be identified exactly during the in-situ measurements.
Klíčová slova:
cable stayed bridges; structural health monitoring; ANSYS
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Damage detection study for a pedestrian cable-stayed bridge using ANSYS
In connection to development of new testing techniques for bridges at ITAM, a theoretical damage detection case study was performed for a cable stayed bridge over the Vltava River at Lužec. The ...
Technological challenges in the fabrication of MoS.sub.2./sub./diamond heterostructures
Varga, Marián; Sojková, M.; Hrdá, J.; Hutar, P.; Parsa Saeb, S.; Vanko, G.; Pribusova Slusna, L.; Ondič, Lukáš; Fait, Jan; Kromka, Alexander; Hulman, M.
2023 - anglický
Nowadays, 2D materials are one of the most studied classes of materials. In addition to the most famous graphene, progress has been achieved in studying and using fundamental properties of transition metal dichalcogenides (TMD). Complementary, diamond as a representative of 3D materials has gained a reputation as an extremely versatile material due to its extraordinary combination of physical/chemical/electrical/optical properties. Besides these particular forms of 2D and 3D materials, their heterostructures have become very attractive due to new phenomena and functions (bandgap engineering, enhanced charge transport, optical interaction, etc.). However, individual technological procedures are still minimally investigated and described. Here, we will demonstrate a proof-of-concept for the preparation of MoS2/diamond heterostructures, where two different strategies were employed: a) growth of MoS2 layers on diamond films, and b) growth of diamond films on Si/MoS2 substrates.
Klíčová slova:
transition metal dichalcogenides; molybdenum disulfide; diamond; heterostructures
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Technological challenges in the fabrication of MoS.sub.2./sub./diamond heterostructures
Nowadays, 2D materials are one of the most studied classes of materials. In addition to the most famous graphene, progress has been achieved in studying and using fundamental properties of transition ...
Direct construction of reciprocal mass matrix and higher order fininite element method
Cimrman, Robert; Kolman, Radek; González, J. A.; Park, K. C.
2023 - anglický
When solving dynamical problems of computational mechanics, such as contact-impact problems or cases involving complex structures under fast loading conditions, explicit time-stepping algorithms are usually preferred over implicit ones. The explicit schemes are normally combined with the lumped (diagonal) mass matrix so that the calculations are efficient and moreover dispersion errors in wave propagation are partially eliminated. As an alternative to lumping with advantageous properties, the reciprocal mass matrix is an inverse mass matrix that has the same sparsity structure as the original consistent mass matrix, preserves the total mass, captures well the desired frequency spectrum and leads thus to efficient and accurate calculations. In the contribution we comment on the usability of the reciprocal mass matrix in connection with higher order FEM.
Klíčová slova:
higher-order finite element method; reciprocal mass matrix; transient problems; explicit time integration; lumping process
Dokument je dostupný na externích webových stránkách.
Direct construction of reciprocal mass matrix and higher order fininite element method
When solving dynamical problems of computational mechanics, such as contact-impact problems or cases involving complex structures under fast loading conditions, explicit time-stepping algorithms are ...
Reduced basis solver for stochastic Galerkin formulation of Darcy flow with uncertain material parameters
Béreš, Michal
2023 - anglický
In this contribution, we present a solution to the stochastic Galerkin (SG) matrix equations coming from the Darcy flow problem with uncertain material coefficients in the separable form. The SG system of equations is kept in the compressed tensor form and its solution is a very challenging task. Here, we present the reduced basis (RB) method as a solver which looks for a low-rank representation of the solution. The construction of the RB consists of iterative expanding of the basis using Monte Carlo sampling. We discuss the setting of the sampling procedure and an efficient solution of multiple similar systems emerging during the sampling procedure using deflation. We conclude with a demonstration of the use of SG solution for forward uncertainty quantification.
Klíčová slova:
stochastic Galerkin method; reduced basis method; Monte Carlo method; deflated conjugate gradient method
Dokument je dostupný na externích webových stránkách.
Reduced basis solver for stochastic Galerkin formulation of Darcy flow with uncertain material parameters
In this contribution, we present a solution to the stochastic Galerkin (SG) matrix equations coming from the Darcy flow problem with uncertain material coefficients in the separable form. The SG ...
NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.
Vaše náměty a připomínky posílejte na email nusl@techlib.cz
Provozovatel
Zahraniční báze