Used filters (2)  Zrušit všechna omezení
Number of found documents: 20899
Published from to

Využití pokročilých fluorescenčních metod ve studiu agregace
Uhrínová, Alžbeta; Enev, Vojtěch; Venerová, Tereza
2024 - Slovak
The diploma thesis deals with the use of advanced fluorescence techniques in the study of aggregation of selected aggregation models (casein and sodium dodecyl sulfate). At the beginning of the research, fluorescent probes Atto 488 and Rhodamine 6G (RH6G) were characterized using a spectrofluorometry, UV-VIS spectrometry, time-resolved fluorescence, and fluorescence correlation spectroscopy (FCS). Aggregation models with the addition of fluorescent probes were characterized using the same advanced fluorescence techniques. The interaction between the fluorescent probe Atto 488 and the aggregation models was not confirmed. The excitation maximum of Atto 488 was at 500 nm and the emission maximum at 520 nm. The lifetime of the fluorescent probe Atto 488 was from 4,20 to 4,82 ns and the hydrodynamic radius was determined to 0,6 nm. Rhodamine 6G had an excitation maximum at 525 nm and an emission maximum at 555 nm. The lifetime of the fluorescent probe RH6G was from 3,99 to 5,27 ns. The intensity of RH6G was found to decrease upon addition of a higher concentration of casein, resulting in quenching. The hydrodynamic radius of the RH6G probe was determined to 0,6 nm. With the addition of casein using the maximum entropy method (MEM) evaluation was from 0,5 to 534 nm. Stable SDS micelles had a hydrodynamic radius by MEM evaluation of 2,4 nm. Diplomová práca sa zaoberá použitím pokročilých fluorescenčných techník v štúdii agregácie vybraných agregačných modelov (kazeín a dodecylsulfát sodný). Na začiatku výskumu boli charakterizované fluorescenčné sondy Atto 488 a Rodamín 6G (RH6G) za použitia spektrofluorometrie, UV-VIS spektrometrie, časovo rozlíšenej fluorescencie a fluorescenčnej korelačnej spektroskopie (FCS). Pomocou rovnakých pokročilých fluorescenčných techník boli charakterizované agregačné modely s prídavkom fluorescenčných sond. Interakcia medzi fluorescenčnou sondou Atto 488 a agregačnými modelmi nebola potvrdená. Excitačné maximum Atto 488 bolo pri 500 nm a emisné maximum pri 520 nm. Doba života fluorescenčnej sondy Atto 488 bola od 4,20 do 4,82 ns a hydrodynamický polomer bol stanovený na 0,6 nm. Rodamín 6G mal excitačné maximum pri 525 nm a emisné maximum pri 555 nm. Doba života fluorescenčnej sondy RH6G bola od 3,99 do 5,27 ns. Zistilo sa, že intenzita RH6G po pridaní vyššej koncentrácie kazeínu klesá, čo má za následok zhášanie. Hydrodynamický polomer samotnej sondy RH6G bol stanovený na 0,6 nm. S prídavkom kazeínu pomocou vyhodnotenia metódou maximálnej entropie (MEM) bol od 0,5 do 534 nm. Stabilné micely SDS mali hydrodynamický polomer pomocou vyhodnotenia MEM 2,4 nm. Keywords: Fluorescence; spectroscopy; Atto 488; Rhodamine 6G; casein; sodium dodecyl sulfate Available in a digital repository NRGL
Využití pokročilých fluorescenčních metod ve studiu agregace

The diploma thesis deals with the use of advanced fluorescence techniques in the study of aggregation of selected aggregation models (casein and sodium dodecyl sulfate). At the beginning of the ...

Uhrínová, Alžbeta; Enev, Vojtěch; Venerová, Tereza
Vysoké učení technické v Brně, 2024

Optimalizace tepelně aktivovaných stavebních konstrukcí
Oravec, Jakub; Kalousek, Miloš; Čekon, Miroslav; Šikula, Ondřej
2024 - Slovak
The thesis deals with the modelling, analysis and optimization of thermally activated foundation piles using the in-house developed numerical software Epile. A sensitivity analysis of short energy piles was performed and a deep regression neural model was developed to predict the energy gain of the pile. A Bayesian optimization method was implemented to find the optimal parameters of the energy piles in order to maximize the financial and energy gain. Dizertačná práca sa venuje modelovaniu, analýze a optimalizácii tepelne aktivovaných základových pilót s využitím vlastného vyvinutého numerického softvéru Epile. Bola vykonaná citlivostná analýza krátkych energetických pilót a vytvorený hlboký regresný neurónový model na predikciu energetického zisku pilóty. Implementovaná bola Bayesovská optimalizačná metóda na hľadanie optimálnych parametrov energetických pilót s cieľom maximalizovať finančný a energetický zisk. Keywords: energy pile; numerical simulation; thermally activated building structure; heat transfer; heat exchanger; optimization; sensitivity analysis; parametric analysis; regression neural model Available in a digital repository NRGL
Optimalizace tepelně aktivovaných stavebních konstrukcí

The thesis deals with the modelling, analysis and optimization of thermally activated foundation piles using the in-house developed numerical software Epile. A sensitivity analysis of short energy ...

Oravec, Jakub; Kalousek, Miloš; Čekon, Miroslav; Šikula, Ondřej
Vysoké učení technické v Brně, 2024

Program pro výpočet energetické bilance optického spoje Země – Mars
Marčák, Tomáš; Róka, Rastislav; Hudcová, Lucie
2024 - Slovak
The master’s thesis is focused on the design and development of a program for calculating the relative positions of the planets Earth and Mars in the solar system. The aim of this thesis was to study and present the current and planned possibilities of optical and laser communication between Earth and Mars. Subsequently, the thesis presents the design of the program, which is complemented by the theoretical calculation of the relative positions of the planets Earth – Mars in the solar system. This program further plots the planets themselves in the solar system with their orbits. Another focus of the thesis is the design of an optical link and the subsequent analysis of the optical link budget between the planets Earth and Mars. Diplomová práca sa zameriava na návrh a vytvorenie programu pre výpočet vzájomnej pozície planét Zem a Mars v solárnom systéme. Cieľom tejto záverečnej práce je preštudovať a predstaviť súčasné a v budúcnosti plánované možnosti optickej a laserovej komunikácie na trase Zem Mars. Následne je v práci predstavený návrh programu, ktorý je doplnený o teoretický výpočet vzájomných pozícii najmä planét Zem Mars v solárnom systéme. Tento program ďalej vykresľuje samotné planéty v solárnom systéme s obežnými dráhami. Ďalším smerovaním práce je návrh optického bezkáblového spoja a následná analýza energetickej bilancie optického spoja medzi planétami Zem a Mars. Keywords: optical communications; Mars; optical link; laser communications; mutual position of planets; planetary orbits; geometrical parameters of optical link; optical link budget Available in a digital repository NRGL
Program pro výpočet energetické bilance optického spoje Země – Mars

The master’s thesis is focused on the design and development of a program for calculating the relative positions of the planets Earth and Mars in the solar system. The aim of this thesis was to study ...

Marčák, Tomáš; Róka, Rastislav; Hudcová, Lucie
Vysoké učení technické v Brně, 2024

Návrh laboratorních úloh: disperze v optických vláknech
Bilek, Maroš; Klíčník, Ondřej; Münster, Petr
2024 - Slovak
This thesis first addresses the theoretical analysis of optical fiber transmissions with a focus on the dispersions occurring in optical fibers. Chromatic and polarization mode dispersion are described in detail, including their origin, impact on the transmitted signal, and measurement methods. Based on the theoretical analysis of measurement methods, two were selected for application in the practical part of the thesis, specifically for designing measuring setups for laboratory exercises. The designed setups were practically implemented on several types of fibers with different lengths. The measured values corresponded with predicted theoretical values and met the limit values of the tested fibers. The main output of this thesis consists of two laboratory exercises focused on chromatic dispersion and polarization mode dispersion. These laboratory exercise designs include a brief theoretical analysis of the respective dispersion, specify the necessary limit values and characteristics of the dispersions for evaluating correct results, and implement the measurement method setups for both dispersions. Specifically, these are the pulse delay method for chromatic dispersion and the fixed analyzer method for polarization mode dispersion. Táto práca sa najprv venuje teoretickému rozboru optovláknových prenosov so zameraním na disperzie vyskytujúce sa v optických vláknach. Detailne sú popísané chromatická a polarizačná vidová disperzia. To zahrňuje ich vznik, dôsledky a ich meracie metódy. Ná zaklade teoretického rozboru meracích metód boli vybrané dve na uplatnenie v praktickej časti pri návrhu zapojení pre laboratórne úlohy. Navrhnuté zapojenia boli prakticky prevedené na niekoľkých typoch vlákien o rôznych dĺžkach. Namerané hodnoty sa zhodovali s teoretickými a vyhovovali limitným hodnotám testovaných vlakien. Hlavným výstupom tejto diplomovej práce sú laboratórne úlohy venované chromatickej disperzii a polarizačnej vidovej disperzii. V týchto návrhoch laboratórnych úloch sa nachádza stručný teoretický rozbor danej disperzie, sú úvedené potrebné limitné hodnoty a charakteristiky disperzií pre vyhodnotenie správnych výsledkov a implementované zapojenia meracích metód pre obe disperzie. Menovite sú to metóda oneskorenia impulzov pre chromatickú disperziu a metóda s fixným analyzérom pre polarizačnú vidovú disperziu. Keywords: Dispersion; fiber; polarization; CD; PMD; DGD Available in a digital repository NRGL
Návrh laboratorních úloh: disperze v optických vláknech

This thesis first addresses the theoretical analysis of optical fiber transmissions with a focus on the dispersions occurring in optical fibers. Chromatic and polarization mode dispersion are ...

Bilek, Maroš; Klíčník, Ondřej; Münster, Petr
Vysoké učení technické v Brně, 2024

Redundance opensource firewallů
Škurla, Tomáš; Zeman, Václav; Slavíček, Karel
2024 - Slovak
This diploma thesis deals with the comparison of different open-source firewalls from the perspective of high availability topology. The goal of the thesis is to determine the most suitable firewall for implementing a topology with high availability. The theoretical part deals with the explanation of the concepts of address translation, the operation of firewalls, and subsequently describes the protocols necessary for the implementation of high availability, followed by a description of the testing using GNS3. The practical part of the thesis describes the preparation of the laboratory environment, as well as the process of configuration and testing of the individual firewalls, followed by an evaluation based on the test results. Táto diplomová práca sa zaoberá porovnaním jednotlivých open-source firewallov z pohľadu topológie vysokej dostupnosti. Cieľom práce je určiť najvhodnejší firewall pre realizáciu topológie s vysokou dostupnosťou. Teoretická časť práce sa zaoberá vysvetlením pojmov prekladu adries, fungovania firewallov a následne i popisom protokolov potrebných pre realizáciu vysokej dostupnosti a následne je popísané testovanie pomocou programu GNS3. V praktickej časti práce je opísaný postup prípravy laboratórneho prostredia ako i proces konfigurácie a testovania jednotlivých firewallov a následne je z výsledkov testovania pripravené vyhodnotenie Keywords: High Availability; NAT; CARP; VRRP; Firewall; pfSense; OPNsense; IPFire; GNS3; Testing; Redundancy; Synchronization; TCP Available in a digital repository NRGL
Redundance opensource firewallů

This diploma thesis deals with the comparison of different open-source firewalls from the perspective of high availability topology. The goal of the thesis is to determine the most suitable firewall ...

Škurla, Tomáš; Zeman, Václav; Slavíček, Karel
Vysoké učení technické v Brně, 2024

Vytvoření simulačního modelu přístupové sítě
Formánek, Juraj; Slavíček, Karel; Grenar, David
2024 - Slovak
Thesis deals with generating and monitoring traffic in the GNS 3 simulation tool. The properties of the GNS 3 simulator are defined, including its capabilities for simulating/emulating components. Emphasis is placed on using only open-source tools. After analyzing the capabilities of GNS 3, a suitable traffic generator is found, which is preceded by practical testing of multiple generators. After finding the generator, monitoring tools are practically tested, with Zabbix emerging as the best from the tests. It was linked with the visualization tool Grafana through Zabbix plugin. Part of the work consists of automation, managed by Zabbix along with bash/Python scripts. The thesis evaluates the use of GNS 3 and explores its capabilities, possibilities, and limitations in the area of traffic monitoring and generation. The result is the creation of an access network with one router and two containers that generate and send traffic through this router. Everything is monitored by Zabbix and useful results are displayed in Grafana. Diplomová práca sa zaoberá problematikou generovaním a monitorovaním prevádzky v simulačnom nástroji GNS 3. Sú definované vlastnosti simulátora GNS 3 pre prácu, jeho možností pre simulovanie/emulovanie prvkov. Dôraz je kladený na využívanie iba open-source nástrojov. Po analyzovaní schopností GNS 3 je nájdený vhodný generátor prevádzky, ktorému predchádza praktické testovanie viacerých generátorov. Po nájdení generátora sú prakticky otestované monitorovacie nástroje, kedy najlepšie z testovania vyšiel Zabbix. Ten bol prepojený s vizualizačným nástrojom Grafana. Časť práce tvorí automatizácia, o ktorú sa staral Zabbix spolu s bashovými/python skriptami. Práca zhodnocuje použitie GNS 3 a skúma jeho schopnosti, možnosti a limitácie v oblasti monitoringu a generovania prevádzky. Výsledkom je vytvorenie prístupovej siete s jedným smerovačom a dvomi kontajnermi, ktoré generujú a posielajú prevádzku cez tento smerovač. Všetko je monitorované Zabbixom a užitočné výsledky zobrazené v Grafane. Keywords: GNS 3; container; script; python; monitoring; Zabbix; Grafana; Cisco TRex; SNMP; full-duplex; open-source; automation Available in a digital repository NRGL
Vytvoření simulačního modelu přístupové sítě

Thesis deals with generating and monitoring traffic in the GNS 3 simulation tool. The properties of the GNS 3 simulator are defined, including its capabilities for simulating/emulating components. ...

Formánek, Juraj; Slavíček, Karel; Grenar, David
Vysoké učení technické v Brně, 2024

Rozvětvené dynamické modely řidiče
Čelko, Jakub; Jirgl, Miroslav; Mihálik, Ondrej
2024 - Slovak
The thesis is focused on modelling human-machine systems, where a human operator controls a vehicle. The result of the work is a comparison of the prediction capabilities of chosen multiloop and single-loop human driver models. These models are applied in scenarios where, in addition to the lane change forcing function, there is also a disturbance signal that affects the vehicle’s motion. The parameters characterising the human dynamics are extracted from the model of the whole loop, defined as a discrete state-space model. The thesis also contains research on driver models, description of the used vehicle simulator and the Unreal Engine 4 environment used for its implementation. Documentation of implemented disturbance signals that act as a fault at the input of the regulated system is also presented. The identification results on the measured data suggest that the models relying on a single transfer function are losing prediction capabilities in scenarios, where the disturbances affect the vehicle. In such cases, the multiloop models with the same number of parameters are able to capture human behaviour more accurately. Práca je zameraná na modelovanie systémov človek-stroj, kde operátor riadi vozidlo. Výsledkom práce je porovnanie kvality modelovania reakcií vodiča vybraných rozvetvených a nerozvetvených modelov. Modely sú aplikované v scenároch, kde okrem budiacej funkcie vo forme žiadaného jazdného pruhu pôsobí aj poruchový signál, ktorý ovplyvňuje smer jazdy vozidla. Identifikácia modelu vodiča prebiehala modelovaním celej uzavretej slučky v diskrétnom stavovom popise. V práci je taktiež spísaná rešerš modelov vodiča, predstavený použitý simulátor vozidla a prostredie Unreal Engine 4 použité pre jeho implementáciu. Prezentovaná je aj dokumentácia implementovaných poruchových signálov, ktoré pôsobia ako porucha na vstupe regulovanej sústavy. Výsledky identifikácie modelov na nameraných dátach naznačujú, že nerozvetveným modelom s jedinou prenosovou funkciou sa v scenároch, kde pôsobí poruchový signál, znižuje kvalita predikcie. Rozvetvené modely s rovnakým počtom parametrov dokážu v takých prípadoch modelovať reakcie vodiča kvalitnejšie. Keywords: dynamical driver models; human-machine systems; human operator; multiloop models; vehicle simulator Available in a digital repository NRGL
Rozvětvené dynamické modely řidiče

The thesis is focused on modelling human-machine systems, where a human operator controls a vehicle. The result of the work is a comparison of the prediction capabilities of chosen multiloop and ...

Čelko, Jakub; Jirgl, Miroslav; Mihálik, Ondrej
Vysoké učení technické v Brně, 2024

Návrh měřicí jednotky pro chytré zemědělství
Kostelanská, Alžbeta; Kubánek, David; Herencsár, Norbert
2024 - Slovak
The Master's thesis is dealing with the design of an intelligent measuring unit aimed at the field of smart agriculture. The proposed measuring unit is intended to provide automated measurements and monitoring of plant conditions utilizing electrical bioimpedance spectroscopy. In the theoretical part of the thesis, the concept of bioimpedance is introduced, the main focus is on the interpretation of its value in the context of agriculture. The practical part of the thesis is dealing with the design and implementation of a prototype impedance analyzer which utilizes an integrated analogue impedance interface. The output of the thesis is a prototype of the measuring unit and an interface for visualization of the measured data. The conclusion of the thesis is devoted to the evaluation of the results of the measurements, which have been conducted by the constructed prototype. AD5941, bioimpedancia, bioimpedančná spektroskopia, chytré poľnohospodárstvo, EIS, ESP32, IEEE 802.15.4 Keywords: AD5941; bioimpedance; bioimpedance spektroskopy; EIS; ESP32; IEEE 802.15.4; smart agriculture Available in a digital repository NRGL
Návrh měřicí jednotky pro chytré zemědělství

The Master's thesis is dealing with the design of an intelligent measuring unit aimed at the field of smart agriculture. The proposed measuring unit is intended to provide automated measurements and ...

Kostelanská, Alžbeta; Kubánek, David; Herencsár, Norbert
Vysoké učení technické v Brně, 2024

Systém pro sledování a klasifikaci objektů na obloze
Franka, Jakub; Honec, Peter; Janáková, Ilona
2024 - Slovak
This work deals with the use of computer vision in the field of detection, tracking and classification of flying objects in a real environment. The goal is to create a robust system, capable of working effectively in adverse conditions and accurately identifying different types of objects in the sky. The work progresses from theoretical foundations, choice of methods, to the design and implementation of a computer vision system. Táto práca sa zaoberá využitím počítačového videnia v oblasti detekcie, trasovania a klasifikácie lietajúcich objektov v reálnom prostredí. Cieľom je vytvoriť robustný systém, schopný efektívne pracovať v nepriaznivých podmienkach a presne identifikovať rôzne typy objektov na oblohe. Práca postupuje od teoretických základov, výberu metód, až po návrh a implementáciu systému počítačového videnia. Keywords: computer vision; object detection; tracking; classification; flying objects; microcomputers; dataset Available in a digital repository NRGL
Systém pro sledování a klasifikaci objektů na obloze

This work deals with the use of computer vision in the field of detection, tracking and classification of flying objects in a real environment. The goal is to create a robust system, capable of ...

Franka, Jakub; Honec, Peter; Janáková, Ilona
Vysoké učení technické v Brně, 2024

Optimalizace velikosti bateriového úložiště v průmyslových objektech s obnovitelnými zdroji
Prečuch, Martin; Vrána, Michal; Vojtek, Martin
2024 - Slovak
The aim of this work was to create an application, a software tool, which will allow to optimally choose the size of the battery storage, from an economic and technical point of view, using the calculation of energy and power balances. These calculations are based on input data for a defined period, object onsumption, battery storage parameters and photovoltaic power plant. In the theoretical part of the work, research was conducted to find suitable storage devices for industrial facilities and explore their potential applications. The third chapter covers the algorithmization and development of an application focused on peak shaving and reducing the reserved capacity of an industrial facility through battery storage. The chapter describes in detail the necessary input data for simulation, application development, and individual parts of the program are described using flow diagrams. Following this, the creation of the graphical user interface of the application and the economic analysis are detailed. The fourth chapter presents a case study with two scenarios. Based on the case study, the functionality of the application was verified, confirmed, and demonstrated. Cieľom tejto práce bolo vytvoriť aplikáciu, softvérový nástroj, ktorý umožní optimálne zvoliť veľkosť batériového úložiska, z ekonomického a technického hľadiska, pomocou výpočtu energetických a výkonových bilancií. Tieto výpočty sú uskutočnené na základe vstupných dát pre definovaný časový úsek, spotreby objektu, parametrov batériového úložiska a fotovoltaickej elektrárne. V teoretickej časti práce bola vykonaná rešerš zameraná na nájdenie vhodných akumulačných systémov v priemyselných objektoch a možnosti ich využitia. V tretej kapitole bola popísaná algoritmizácia a vývoj aplikácie zameranej na orezávanie špičiek a znižovanie rezervovanej kapacity priemyselného objektu prostredníctvom batériového úložiska. Kapitola detailne popisuje potrebné vstupné údaje pre simuláciu, tvorbu aplikácie a jednotlivé časti programu sú popísané pomocou vývojových diagramov. Ďalej je popísaná tvorba grafického užívateľského rozhrania aplikácie a ekonomická analýza. Štvrtá kapitola sa zameriava na prípadovú štúdiu s dvoma scenármi. Na základe prípadovej štúdie bola overená, potvrdená a prezentovaná funkčnosť aplikácie. Keywords: Battery storage; Peak shaving; Reserved capacity; Economic analysis Available in a digital repository NRGL
Optimalizace velikosti bateriového úložiště v průmyslových objektech s obnovitelnými zdroji

The aim of this work was to create an application, a software tool, which will allow to optimally choose the size of the battery storage, from an economic and technical point of view, using the ...

Prečuch, Martin; Vrána, Michal; Vojtek, Martin
Vysoké učení technické v Brně, 2024

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases