Použitá omezení (2)  Zrušit všechna omezení
Počet nalezených dokumentů: 4356
Publikováno od do

Separation of exosomes from polydisperse suspension in microfluidic devices
Paříková, Anna
2023 - anglický
The work included fine-tuning the experimental methodology, writing an in-house code for exosome tracking based on a one-way\napproach, and performing a parametric study to investigate the separation potential of the microdevice as a function of channel geometry, flow rate, and viscosity. Preliminary results show that viscoelasticmicrofluidics can be used as an alternative to conventional e xosome separation techniques. Klíčová slova: separation techniques; exosomes; microfluidic devices Plné texty jsou dostupné v digitálním repozitáři NUŠL
Separation of exosomes from polydisperse suspension in microfluidic devices

The work included fine-tuning the experimental methodology, writing an in-house code for exosome tracking based on a one-way\napproach, and performing a parametric study to investigate the separation ...

Paříková, Anna
Ústav chemických procesů, 2023

HIGHLY-TIME RESOLVED ELEMENTAL SOURCE APPORTIONMENT OF PM2.5 AT AN URBAN TRAFFIC SITE IN PRAGUE
Windell, Laurence Christian; Pokorná, Petra; Ondráček, Jakub; Schwarz, Jaroslav; Lhotka, Radek; Vodička, Petr; Zíková, Naděžda; Hopke, P.K.; Ždímal, Vladimír
2023 - anglický
This work aims to quantify metal emissions from traffic at an urban traffic site in Prague, Czech Republic, identify key tracers of emissions, and investigate exhaust and non-exhaust emissions observable in fine particulate matter (PM2.5). This project signifies the first high-time resolution elemental analysis of Prague aerosols. Klíčová slova: source apportionment; traffic; online Plné texty jsou dostupné v digitálním repozitáři NUŠL
HIGHLY-TIME RESOLVED ELEMENTAL SOURCE APPORTIONMENT OF PM2.5 AT AN URBAN TRAFFIC SITE IN PRAGUE

This work aims to quantify metal emissions from traffic at an urban traffic site in Prague, Czech Republic, identify key tracers of emissions, and investigate exhaust and non-exhaust emissions ...

Windell, Laurence Christian; Pokorná, Petra; Ondráček, Jakub; Schwarz, Jaroslav; Lhotka, Radek; Vodička, Petr; Zíková, Naděžda; Hopke, P.K.; Ždímal, Vladimír
Ústav chemických procesů, 2023

INFLUENCE OF RESPIRATORY TRACT CONDITIONS ON PARTICLE SIZE DISTRIBUTIONS GENERATED BY COMMERCIALLY AVAILABLE INHALERS
Mašková, Ludmila; Ždímal, Vladimír; Ondráček, Jakub
2023 - anglický
Pressurized metered dose inhalers (MDI) and dry powder inhalers (DPI) are an integral part of the treatment of lung diseases such as asthma and chronic obstructive pulmonary disease (COPD) (Vichrow et al., 2008). An important characteristic of particles dosed by MDI and DPI is particle size distribution (PSD) (Byron, 1990). This may vary depending on the formulation, but also on the temperature and relative humidity (RH) changes during the transport from the inhaler to the human respiratory tract. The aim of this study was to determine the influence of RH and inspiratory flow rates on the PSD\ncharacteristics and predict deposition efficiency of inhalable particles in the lungs. Klíčová slova: number size distribution; inhaler; hygroscopicity Plné texty jsou dostupné v digitálním repozitáři NUŠL
INFLUENCE OF RESPIRATORY TRACT CONDITIONS ON PARTICLE SIZE DISTRIBUTIONS GENERATED BY COMMERCIALLY AVAILABLE INHALERS

Pressurized metered dose inhalers (MDI) and dry powder inhalers (DPI) are an integral part of the treatment of lung diseases such as asthma and chronic obstructive pulmonary disease (COPD) (Vichrow et ...

Mašková, Ludmila; Ždímal, Vladimír; Ondráček, Jakub
Ústav chemických procesů, 2023

VE VODĚ ROZPUSTNÉ SLOUČENINY PM2.5 NA TŘECH VENKOVSKÝCH POZAĎOVÝCH LOKALITÁCH VE STŘEDNÍ EVROPĚ V CHLADNÝCH A TEPLÝCH OBDOBÍCH
Schwarz, Jaroslav; Vodička, Petr; Lhotka, Radek; Pokorná, Petra; Zíková, Naděžda; Ondráček, Jakub; Aurora, S.; Poulain, L.; Herrmann, H.; Ždímal, Vladimír
2023 - český
Iontová chromatografie (IC) byla použita k charakterizaci ve vodě rozpustných sloučenin v PM2,5 během zimní a letní kampaně na třech venkovských lokalitách ve střední Evropě v časovém rozlišení 12 hodin (den/noc). Koncentrace aerosolů ze spalování biomasy se v zimě od Melpitzu po Košetice zdvojnásobily, mořská sůl vykazovala opačné chování. V létě byly v Melpitzu zjištěny vyšší hodnoty síranů a kyseliny metansulfonové. Poměr denních a nočních koncentrací vykazoval vyšší denní koncentrace fosforečnanů a sloučenin spojených se spórami hub a bakterií, zatímco vyšší noční koncentrace byly spojeny se spalováním dřeva. Jako přibližné měřítko pro rozlišení místních a dálkově přenášených aerosolů byl použit ventilační index. Produkty spalování biomasy byly identifikovány jako většina místních aerosolů, zatímco mořská sůl jako dálkově přenášený aerosol. Ion chromatography (IC) was used to characterize water soluble compounds in PM2.5 during winter and summer campaigns at three rural sites in Central Europe in 12-hour (day/night) time resolution. Concentrations of biomass combustion aerosolsdoubled from Melpitz to Košetice in winter, sea salt exhibited opposite behaviour. Summer exhibited higher sulphates and methane sulphonic acid in Melpitz. Day to night ratios showed higher day concentrations for phosphates and compounds connected to fungal spores and bacteria, while higher night concentrations were connected to wood combustion. Ventilation index was used as an approximate measure to distinguish local and long range transported aerosols. Biomass combustion products were identified as the \nmajority of local aerosols, while sea salt as long range transported one. Klíčová slova: water-soluble compounds,; 3 sites; 12-h time resolution Plné texty jsou dostupné v digitálním repozitáři NUŠL
VE VODĚ ROZPUSTNÉ SLOUČENINY PM2.5 NA TŘECH VENKOVSKÝCH POZAĎOVÝCH LOKALITÁCH VE STŘEDNÍ EVROPĚ V CHLADNÝCH A TEPLÝCH OBDOBÍCH

Iontová chromatografie (IC) byla použita k charakterizaci ve vodě rozpustných sloučenin v PM2,5 během zimní a letní kampaně na třech venkovských lokalitách ve střední Evropě v časovém rozlišení 12 ...

Schwarz, Jaroslav; Vodička, Petr; Lhotka, Radek; Pokorná, Petra; Zíková, Naděžda; Ondráček, Jakub; Aurora, S.; Poulain, L.; Herrmann, H.; Ždímal, Vladimír
Ústav chemických procesů, 2023

ON OUR RECENT WORK IN STUDYING NEW PARTICLE FORMATION (NPF)
Kovářík, Jiří; Špalová, Anna; Roztočil, Petr; Zíková, Naděžda; Schwarz, Jaroslav; Ždímal, Vladimír
2023 - anglický
New particle formation (NPF) is increasingly gaining attention since it emerged roughly twenty years ago as a field of interest within the aerosol science. It studies the transition process between gas phase molecules, forming clusters and eventually becoming aerosol particles. Thus, this field is a multidisciplinary one, ranging from meteorology, atmospheric chemistry and physics, all the way through physical chemistry towards chemistry and physics of aerosols. \nRecent development of instrumentation techniques allows measuring of sub-5 nm particles and molecule clusters, neutral and also charged ones. Therefore, modern analytical methods based on these measurements are often used for NPF studies. Klíčová slova: atmospheric aerosols; new particle formation; NAIS Plné texty jsou dostupné v digitálním repozitáři NUŠL
ON OUR RECENT WORK IN STUDYING NEW PARTICLE FORMATION (NPF)

New particle formation (NPF) is increasingly gaining attention since it emerged roughly twenty years ago as a field of interest within the aerosol science. It studies the transition process between ...

Kovářík, Jiří; Špalová, Anna; Roztočil, Petr; Zíková, Naděžda; Schwarz, Jaroslav; Ždímal, Vladimír
Ústav chemických procesů, 2023

Improving computational efficiency of contact solution in fully resolved CFD-DEM simulations with arbitrarily-shaped solids
Studeník, Ondřej; Kotouč Šourek, M.; Isoz, Martin
2023 - anglický
The abundance of industrial processes containing both solid and liquid phases generate demand for fully resolved models allowing for detailed analysis and optimization of these processes. An established approach providing such models is based using a variant of an immersed boundary method to couple the computational fluid dynamics (CFD) and discrete element method (DEM). In the talk, we will present our custom and monolithic implementation of a fully-resolved CFDDEM solver and concentrate on the intricacies of solving contact between two arbitrarily-shaped solids. We shall propose an efficient contact treatment based on the concept of a virtual mesh, which provides the mesh resolution required by DEM through dividing the space around the contact point in a finite volume fashion without any changes to the CFD mesh itself. A substantial part of the talk will devoted to the parallelization of the contact solution, especially in the context of the domain decomposition method imposed by the CFD solver. Klíčová slova: CFD; DEM; virtual mesh Dokument je dostupný na externích webových stránkách.
Improving computational efficiency of contact solution in fully resolved CFD-DEM simulations with arbitrarily-shaped solids

The abundance of industrial processes containing both solid and liquid phases generate demand for fully resolved models allowing for detailed analysis and optimization of these processes. An ...

Studeník, Ondřej; Kotouč Šourek, M.; Isoz, Martin
Ústav termomechaniky, 2023

On the development of a numerical model for the simulation of air flow in the human airways
Lancmanová, Anna; Bodnár, Tomáš; Sequeira, A.
2023 - anglický
This contribution reports on an ongoing study focusing on reduced order models for incompressible viscous fluid flow in two dimensional channels. A finite difference solver was developed using a simple implementation of the immersed boundary method to represent the channel geometry. The solver was validated for unsteady flow by comparing the obtained two-dimensional numerical solutions with analytical profiles computed from the Womersley solution. Finally the 2D model was coupled to a simple 1D extension simulating the flow in axisymmetric elastic vessel (tube). Some of the coupling principles and implementation issues are discussed in detail. Klíčová slova: reduced order model; incompressible Navier-Stokes equations; finite difference approximation; coupling method Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
On the development of a numerical model for the simulation of air flow in the human airways

This contribution reports on an ongoing study focusing on reduced order models for incompressible viscous fluid flow in two dimensional channels. A finite difference solver was developed using a ...

Lancmanová, Anna; Bodnár, Tomáš; Sequeira, A.
Matematický ústav, 2023

Simulating particle-laden flows: from immersed boundaries towards model order reduction
Isoz, Martin; Kubíčková, Lucie; Kotouč Šourek, M.; Studeník, Ondřej; Kovárnová, A.
2023 - anglický
Particle-laden flow is prevalent both in nature and in industry. Its appearance ranges from the trans-port of riverbed sediments towards the magma flow, from the deposition of catalytic material inside particulate matter filters in automotive exhaust gas aftertreatment towards the slurry transport in dredging operations. In this contribution, we focus on the particle-resolved direct numerical simulation (PR-DNS) of the particle-laden flow. Such a simulation combines the standard Eulerian approach to computational fluid dynamics (CFD) with inclusion of particles via a variant of the immersed boundary method (IBM) and tracking of the particles movement using a discrete element method (DEM). Provided the used DEM allows for collisions of arbitrarily shaped particles, PR-DNS is based (almost) entirely on first principles, and as such it is a truly high-fidelity model. The downside of PR-DNS is its immense computational cost. In this work, we focus on three possibilities of alleviating the computational cost of PR-DNS: (i) replacing PR-DNS by PR-LES or PR-RANS, while the latter requires combining IBM with wall functions, (ii) improving efficiency of DEM contact solution via adaptively refined virtual mesh, and (iii) developing a method of model order reduction specifically tailored to PR-DNS of particle-laden flows. Klíčová slova: particle-laden flow; CFD-DEM; arbitrarily-shaped particles; finite volume method Dokument je dostupný na externích webových stránkách.
Simulating particle-laden flows: from immersed boundaries towards model order reduction

Particle-laden flow is prevalent both in nature and in industry. Its appearance ranges from the trans-port of riverbed sediments towards the magma flow, from the deposition of catalytic material ...

Isoz, Martin; Kubíčková, Lucie; Kotouč Šourek, M.; Studeník, Ondřej; Kovárnová, A.
Ústav termomechaniky, 2023

On Reynolds-averaged turbulence modeling with immersed boundary method
Kubíčková, Lucie; Isoz, Martin
2023 - anglický
The immersed boundary (IB) method is an approach in the computational fluid dynamics in which complex geometry conforming meshes are replaced by simple ones and the true simulated geometry is projected onto the simple mesh by a scalar field and adjustment of governing equations. Such an approach is particularly advantageous in topology optimizations (TO) where it allows for substantial speed-up since a single mesh can be used for all the tested topologies. In our previous work, we linked our custom IB variant, the hybrid fictitious domain-immersed boundary method (HFDIB), with a TO framework and successfully carried out an optimization under laminar flow conditions. However, to allow for optimizations of reallife components, the IB approach needs to be coupled with an affordable turbulence modeling. In this contribution, we focus on extending the HFDIB approach by the possibility to perform Reynolds-averaged simulations (RAS). In particular, we implemented the k − ω turbulence model and wall functions for closure variables and velocity. Klíčová slova: immersed boundary; RAS; wall functions; CFD; OpenFOAM Dokument je dostupný na externích webových stránkách.
On Reynolds-averaged turbulence modeling with immersed boundary method

The immersed boundary (IB) method is an approach in the computational fluid dynamics in which complex geometry conforming meshes are replaced by simple ones and the true simulated geometry is ...

Kubíčková, Lucie; Isoz, Martin
Ústav termomechaniky, 2023

Finite element modal analysis of a silicone vocal fold filled with fluid
Hájek, P.; Radolf, Vojtěch; Horáček, Jaromír; Švec, J. G.
2023 - anglický
A three dimensional (3D) finite element (FE) model of a silicone vocal fold (VF) filled with fluid is presented here. The silicone part of the model is based on partial differential equations of the continuum mechanics and consider large deformations. The fluid domain encapsulated in the silicone VF is defined semianalytically as a lumped-element model describing the fluid in hydrostatic conditions. The elongated and pressurized silicone VF was subjected to perturbed modal analysis. Results showed that the choice of the fluid inside the VF substantially influences the natural frequencies. Namely, the water-filling lowers the natural frequencies approximately by half over the air-filling. Besides, the procedure of reverse engineering for obtaining the geometry of the VF from already 3D-printed mold is introduced. Klíčová slova: perturbed modal analysis; finite element method; vocal folds; reverse engineering; biomechanics of voice Dokument je dostupný na externích webových stránkách.
Finite element modal analysis of a silicone vocal fold filled with fluid

A three dimensional (3D) finite element (FE) model of a silicone vocal fold (VF) filled with fluid is presented here. The silicone part of the model is based on partial differential equations of the ...

Hájek, P.; Radolf, Vojtěch; Horáček, Jaromír; Švec, J. G.
Ústav termomechaniky, 2023

O službě

NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.

Vaše náměty a připomínky posílejte na email nusl@techlib.cz

Provozovatel

http://www.techlib.cz

Facebook

Zahraniční báze