Ne (3074)
Ano (921)
Použitá omezení
(3)
Počet nalezených dokumentů:
3995
Publikováno od
do
Electrochemical Properties of Pretomanid. New drug for Tuberculosis Treatment
Deri, M.; Vespi, M.; Giannarelli, S.; Hromadová, Magdaléna
2024 - anglický
The electrochemical behavior of Pretomanid (PA 824) has been investigated in acetonitrile by cyclic voltammetry at different scan rates and compared to dimetridazole reduction in order to elucidate its redox mechanism. Both compounds show similar reduction behavior in the aprotic solvent that involves one electron transfer to the nitro group. The reduction of Pretomanid is more difficult and the stability of its nitro anion radical is much lower compared to the dimetridazole molecule.
Klíčová slova:
pretomanid; dimetridazole; cyclic voltammetry; reduction mechanism
Plné texty jsou dostupné na vyžádání prostřednictvím repozitáře Akademie věd.
Electrochemical Properties of Pretomanid. New drug for Tuberculosis Treatment
The electrochemical behavior of Pretomanid (PA 824) has been investigated in acetonitrile by cyclic voltammetry at different scan rates and compared to dimetridazole reduction in order to elucidate ...
Redox Properties of Pyrene-Cyclohexene Conjugates – Electrochemical Study
Koláčná, Lucie; Čubiňák, M.; Tobrman, T.; Ludvík, Jiří
2024 - anglický
The series of 16 compounds for "organic electronics" comprising the double-bond cyclohexene core extended by pyrene and/or other aromatics were electrochemically characterized by rotating disk voltammetry in N,N-dimethylformamide. Due to multiple substitutions, the resulting potential gap represents the sum of all substituent effects. Different combinations of substituents can be used to achieve the desired properties of cyclohexene-pyrene derivatives. The electrochemical data presented in this contribution facilitate further tuning of properties of these molecules and systems to achieve features required in material chemistry just by means of chemical modification.
Klíčová slova:
pyrene; cyclohexene; conjugation
Plné texty jsou dostupné na vyžádání prostřednictvím repozitáře Akademie věd.
Redox Properties of Pyrene-Cyclohexene Conjugates – Electrochemical Study
The series of 16 compounds for "organic electronics" comprising the double-bond cyclohexene core extended by pyrene and/or other aromatics were electrochemically characterized by rotating disk ...
Electrochemical Valorization of Lignocellulosic Biomass Amination of Furfural and 5-Hydroxymethylfurfural
Donkeng Dazie, Joel; Koláčná, Lucie; Urban, Jiří; Lamač, Martin; Ludvík, Jiří
2024 - anglický
Furfural (FF) and 5-hydroxymethylfurfural (HMF) isolated from waste lignocellulosic biomass represent renewable sources. The present contribution deals with the transformation of FF and HMF into furfuryl amines which are important precursors namely for pharmaceutical synthesis. First, FF and HMF underwent condensation reactions with various amines which were electrochemically monitored to optimize the process. The resulting Schiff bases were identified by NMR and subsequently electrochemically reduced in basic media. The vicinal diamine (aminopinacol) was the main product besides the expected furfuryl amines. This reaction is a contribution to green synthesis because it was performed electrochemically, in water, and without any metallic catalysts.
Klíčová slova:
furfural; 5-hydroxymethylfurfural; (di)amines
Plné texty jsou dostupné na vyžádání prostřednictvím repozitáře Akademie věd.
Electrochemical Valorization of Lignocellulosic Biomass Amination of Furfural and 5-Hydroxymethylfurfural
Furfural (FF) and 5-hydroxymethylfurfural (HMF) isolated from waste lignocellulosic biomass represent renewable sources. The present contribution deals with the transformation of FF and HMF into ...
Electrochemical Properties of Newly Synthesized Selaginpulvilins
Dostálová, L.; Sokolová, Romana; Schwarzová-Pecková, K.; Rýček, L.
2024 - anglický
The electrochemical properties of newly synthesized selaginpulvilin were investigated by cyclic voltammetry and UV-Vis spectroelectrochemistry. The subject of the study were two\nselaginpulvilins differing in the presence of a hydroxyl group in the media of 0.1 mol L-1 tetrabutylammonium hexafluorophosphate as supporting electrolyte in anhydrous acetonitrile. Both\ncompounds provided an oxidative signal in the positive region until +2.0 V.
Klíčová slova:
oxidation; cyclic voltammetry; selaginpulvilins
Plné texty jsou dostupné na vyžádání prostřednictvím repozitáře Akademie věd.
Electrochemical Properties of Newly Synthesized Selaginpulvilins
The electrochemical properties of newly synthesized selaginpulvilin were investigated by cyclic voltammetry and UV-Vis spectroelectrochemistry. The subject of the study were two\nselaginpulvilins ...
3D-printed Electrodes with Nearly Ideal Charge Transfer Characteristics
Vaněčková, Eva; Sebechlebská, Táňa; Kolivoška, Viliam
2024 - anglický
3D printing is an outstanding manufacturing tool for prototyping customized designs at reduced time and costs, having found applications in fields such as medicine or the automotive industry. The development of printable electrically conductive composite materials brought a revolution to electrochemistry, with 3D-printed electrodes being intensively studied from the viewpoint of\nanalytical performance and stability. However, it is often reported that 3D-printed electrodes have poor charge transfer characteristics, typically due to limited exposure of the electrically conductive phase at the composite surface to the surrounding solution. In this work, we devise and apply simple electrochemical activation procedures that lead to a significant improvement of charge transfer characteristics of 3D printed electrodes.
Klíčová slova:
three-dimensional printing; electrochemistry; electrodes
Plné texty jsou dostupné na vyžádání prostřednictvím repozitáře Akademie věd.
3D-printed Electrodes with Nearly Ideal Charge Transfer Characteristics
3D printing is an outstanding manufacturing tool for prototyping customized designs at reduced time and costs, having found applications in fields such as medicine or the automotive industry. The ...
Growth and Phosphorus Dynamics During Tolypothrix tenuis Cultivation – a Cyanobacterium of Biotechnological Potential
Mušálková, Petra
2024 - anglický
Here I investigated the course of biomass growth, phosphorus uptake and changes in intracellular phosphorus content in T. tenuis in a batch cultivation. Cultivation experiment was held in multiple bubble columns during a light regime (alternating light and dark periods 16 and 8h). Thanks to this experiment I was able to obtain a growth curve of T. tenuis. The decrease of phosphorus concentration in the medium was disproportionally faster\nthan biomass growth resulting in significant oscillations of phosphorus content in the biomass, which are typical characteristics for LPU. It was also observed, that after all phosphorus was removed from the medium, the algae growth continues over time, while obviously utilizing intracellular phosphorus reserves. These findings are valuable in course of using this cyanobacterium for efficient bioremediation of eutrophic water based on phosphorus removal by targeted algae cultivation.
Plné texty jsou dostupné v digitálním repozitáři NUŠL
Growth and Phosphorus Dynamics During Tolypothrix tenuis Cultivation – a Cyanobacterium of Biotechnological Potential
Here I investigated the course of biomass growth, phosphorus uptake and changes in intracellular phosphorus content in T. tenuis in a batch cultivation. Cultivation experiment was held in multiple ...
Influence of Material Properties and Mixing Dynamics on Heat Transport in Granular Materials
Kokavcová, Anna
2024 - anglický
This study evaluates the effect of rotational speed on heat transfer and analyzes particle motion at different stirrer rotational frequencies to understand how primary and secondary flows affect heat transfer efficiency. It also examines the effect of Young’s modulus on heat transfer at different agitator\noperating speeds. Key simulation parameters and their influence 33 on heat transfer efficiency are detailed to improve the reproducibility and applicability of the results.
Klíčová slova:
granular mixing; heat transfer; DEM
Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
Influence of Material Properties and Mixing Dynamics on Heat Transport in Granular Materials
This study evaluates the effect of rotational speed on heat transfer and analyzes particle motion at different stirrer rotational frequencies to understand how primary and secondary flows affect heat ...
Reaction Mechanisms of Psychoactive Compounds
Sokolová, Romana; Beneš, Marek; Jiroušková, Eliška; Degano, I.
2024 - anglický
The reaction mechanism of selected new psychoactive substances (NPS) 4-methylpentedrone and 2-(((4-ethyl-2,5-dimethoxyphenethyl)amino)methyl)phenol was investigated based on their\nelectrochemical and spectroelectrochemical properties. Both drugs were examined by means of cyclic voltammetry using diagnostic parameters for particular reaction schemes, UV/Vis, and IR\nspectroelectrochemistry. Since water participates in the redox mechanism of both studied compounds, the reaction mechanism was studied under a controlled amount of water in an\nacetonitrile environment.
Klíčová slova:
oxidation; reduction; IR spectrochemistry
Plné texty jsou dostupné na vyžádání prostřednictvím repozitáře Akademie věd.
Reaction Mechanisms of Psychoactive Compounds
The reaction mechanism of selected new psychoactive substances (NPS) 4-methylpentedrone and 2-(((4-ethyl-2,5-dimethoxyphenethyl)amino)methyl)phenol was investigated based on their\nelectrochemical and ...
Spectroelectrochemical Devices for Monitoring of Intermediates and Products on Carbonbased Composite Electrodes
Vaněčková, Eva; Šikula, M.; Hrdlička, Vojtěch; Sebechlebská, Táňa; Kolivoška, Viliam
2024 - anglický
Spectroelectrochemistry (SEC), as an interdisciplinary field, provides us with more comprehensive information about electroactive molecules involved in charge transfer reactions. Commercially\navailable SEC cells most often have an incorporated platinum working electrode, which can limit the range of the usable potential window and, in addition, can complicate the analysis due to the\nabsorption phenomenon. In this work, we designed and manufactured two types of custom-made SEC cells employing optically transparent carbon-based working electrodes for UV-Vis monitoring of reactants and electrogenerated intermediates and products. The first SEC cell is entirely manufactured by 3D printing using fused deposition modeling (FDM) by combining optically transparent (PET) and electrically conductive (PLA-CB) filaments. The second SEC cell employs pencil graphite (PG) rods as the working electrode (PGE) and its body is manually assembled from quartz slides. The functionality of the FDM 3D printed SEC cell and manually assembled quartz SEC cell were verified by cyclic voltammetry with in situ UV-Vis spectroscopic absorption monitoring of ruthenium(III) acetylacetonate (Ru(ac)3) redox-active probe dissolved in an aqueous or non-aqueous deaerated solvent, respectively. Both presented cells enable complete redox reversible conversion and strictly oxygen-free conditions.
Klíčová slova:
pencil graphite electrode; spectroelectrochemistry; 3D printed electrode
Plné texty jsou dostupné na vyžádání prostřednictvím repozitáře Akademie věd.
Spectroelectrochemical Devices for Monitoring of Intermediates and Products on Carbonbased Composite Electrodes
Spectroelectrochemistry (SEC), as an interdisciplinary field, provides us with more comprehensive information about electroactive molecules involved in charge transfer reactions. ...
Assessment of the Presence of Hazardous Components in Textile Waste
Shtukaturova, Anastasia
2024 - anglický
An up-flow percolation test was chosen to identify and characterize heavy metals and PFAS constituents in textile waste. Up-flow column percolation tests are used on a laboratory scale to assess the leaching behavior of a hazardous substance from a waste in a given state as a function of time. The test was performed according to the European Technical Standard CEN/TS 14405. Preliminary results showed the following heavy metals in the leachates Al, As, Co, Cr, Cu, Fe, Mn, Pb, Zn and Sb, with Al, Cr, Fe, Mn and Zn being predominant.
Klíčová slova:
textile waste; percolation test; PFAS; heavy metals
Plné texty jsou dostupné v digitálním repozitáři NUŠL
Assessment of the Presence of Hazardous Components in Textile Waste
An up-flow percolation test was chosen to identify and characterize heavy metals and PFAS constituents in textile waste. Up-flow column percolation tests are used on a laboratory scale to assess the ...
NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.
Vaše náměty a připomínky posílejte na email nusl@techlib.cz
Provozovatel
Zahraniční báze