Number of found documents: 3889
Published from to

SMV-2023-01: Relief structures based on diffractive optics
Horáček, Miroslav; Kolařík, Vladimír; Matějka, Milan; Krátký, Stanislav; Chlumská, Jana; Meluzín, Petr; Král, Stanislav
2023 - Czech
Research and development in the field of physical realization of graphic and optical structures based on the principle of diffractive optics by means of electron beam lithography in a recording material supported by a silicon or glass board. The research covers the analysis of the graphical or optical motive, research and application of relief structures implementing the required graphic and optical properties, research and modeling of the physical possibilities of implementation of relief structures, preparation and analysis of technology of implementation of relief structures with regard to the limits of current scientific instruments, verification of theoretical considerations by means of relief structure sample exposure. Výzkum a vývoj v oblasti fyzikální realizace grafických a optických struktur na principu difraktivní optiky prostředky elektronové litografie v záznamovém materiálu neseném křemíkovou nebo skleněnou deskou. Výzkum zahrnuje analýzu grafického resp. optického motivu, výzkum a aplikaci reliéfních struktur realizujících požadované grafické resp. optické vlastnosti, výzkum a modelování možností fyzikální realizace reliéfních struktur, vypracování a analýzu technologie realizace reliéfní struktury s ohledem na limity současných vědeckých přístrojů, ověření teoretických úvah expozicí vzorku reliéfní struktury. Keywords: diffractive optical structures; relief structure; e-beam lithography Available at various institutes of the ASCR
SMV-2023-01: Relief structures based on diffractive optics

Research and development in the field of physical realization of graphic and optical structures based on the principle of diffractive optics by means of electron beam lithography in a recording ...

Horáček, Miroslav; Kolařík, Vladimír; Matějka, Milan; Krátký, Stanislav; Chlumská, Jana; Meluzín, Petr; Král, Stanislav
Ústav přístrojové techniky, 2023

SMV-2023-37: CRYSA project - cryostat of the space probe 2
Frolec, Jiří
2023 - Czech
The goal of the project CRYSA is the selection and testing of three composite materials suitable for fixation of a low temperature device (cryostat), which will be part of the upcoming Athena space probe from the European Space Agency (ESA). The Cryogenics and Superconductivity group at the Institute of Scientific Instruments of the Czech Academy of Sciences (ISI Brno), OHB Czechspace, 5M s.r.o. and the Institute of Physics of Materials of the CAS (IPM) collaborate on this project. The aforementioned contractual researches carried out at ISI Brno in 2023 were focused on the partial goals of the project. Specifically, the selection of the three best materials, which will be tested in the future, was finalized. Further, detailed procedures for the planned measurements of the thermal conductivity of the samples and the method of their temperature cycling at low temperatures were developed. The members of the Cryogenics and Superconductivity Group also performed optimization of the measuring devices and measured thermal conductivities of several dummy samples. The outputs of this project will help ESA with the selection of the optimal material for the construction of the mechanical supports for the cryostat in the Athena telescope. Cílem celého projektu CRYSA je výběr a testování tří kompozitních materiálů vhodných pro uchycení zařízení na velmi nízké teplotě (kryostatu), jež bude součástí chystané vesmírné sondy Athena od Evropské kosmické agentury (ESA). Na projektu spolupracuje skupina Kryogeniky a supravodivosti z Ústavu přístrojové techniky (ÚPT), firmy OHB Czechspace, 5M s.r.o. a Ústav fyziky materiálů AV ČR. Uvedené smluvní výzkumy se v r. 2023 v ÚPT zaměřily na dílčí cíle projektu. Konkrétně byl finalizován výběr tří nejlepších materiálů, které budou v budoucnu testovány, byly vypracovány detailní postupy pro plánované měření tepelných vodivostí vzorků a metoda jejich teplotního cyklování za nízkých teplot. Pracovníky skupiny Kryogenika a supravodivost byla také provedena optimalizace měřící aparatury a změřeny tepelné vodivosti několika cvičných vzorků. Výstupy tohoto projektu pomohou ESA s výběrem optimálního materiálu pro konstrukci závěsů uvedeného kryostatu pro dalekohled Athena. Keywords: thermal conductivity; cryogenics; space probe; Athena Available at various institutes of the ASCR
SMV-2023-37: CRYSA project - cryostat of the space probe 2

The goal of the project CRYSA is the selection and testing of three composite materials suitable for fixation of a low temperature device (cryostat), which will be part of the upcoming Athena space ...

Frolec, Jiří
Ústav přístrojové techniky, 2023

Assessment of a report evaluating the impact analysis of the EDU II reactor unit power increase on the vertical stability and dynamic response of the internal parts of the reactor, including consideration of the LOCA DN500 event
Pták, Svatopluk
2023 - Czech
This technical report summarizes the results of the assessment aimed at evaluation of the impact analysis of the increase in the performance of EDU II units in connection with the project '6729 - Use of design margins of the Dukovany reactor units' on the vertical stability and dynamic response of the reactor internal components, including consideration of the LOCA DN500 event, specifically, it is an assessment of two reports of author collectives from ÚJV, a. s.: M. Klemenc and P. Gál: 'Analyzes of the impact of the power increase on the dynamic behavior of RIC during the LOCA DN500 event, report ÚJV DITI 2301/1242, 12/2020 and M. Švrček a J. Vyčichl: 'Analyzes of the impact of increasing power on vertical stability and vibration response (high-cycle fatigue) of RIC', report ÚJV DITI 2301/1307, 08/2021. Tato technická zpráva shrnuje výsledky posouzení výpočtové dokumentace zaměřené na hodnocení analýzy dopadu zvýšení výkonu bloků EDU II v souvislosti s projektem '6729 − Využití projektových rezerv bloků EDU II' na vertikální stabilitu a dynamickou odezvu vnitřních částí reaktoru včetně uvažování nehody LOCA DN500, konkrétně se jedná o posouzení dvou zpráv autorských kolektivů z ÚJV, a. s.: 'M. Klemenc a P. Gál: Analýzy dopadu zvýšení výkonu na dynamické chování VČR při nehodě LOCA DN500, zpráva ÚJV DITI 2301/1242, 12/2020' a M. Švrček a J. Vyčichl: Analýzy dopadu zvýšení výkonu na vertikální stabilitu a vibrační odezvu (vysokocyklovou únavu) VČR, zpráva ÚJV DITI 2301/1307, 08/2021. Keywords: loss coolant accident; dynamic response; primary pipelime of nuclear reactor; internal parts of nuclear reactor Available at various institutes of the ASCR
Assessment of a report evaluating the impact analysis of the EDU II reactor unit power increase on the vertical stability and dynamic response of the internal parts of the reactor, including consideration of the LOCA DN500 event

This technical report summarizes the results of the assessment aimed at evaluation of the impact analysis of the increase in the performance of EDU II units in connection with the project '6729 - Use ...

Pták, Svatopluk
Ústav termomechaniky, 2023

Contract summary report OZM-LCF-2023: Experimental evaluation of low cycle fatigue properties of steel 1.4529
Štefan, Jan; Parma, Slavomír
2023 - Czech
This technical report was prepared within the framework of the contract "OZM-LCF-2023: Experimental evaluation of the properties of steel 1.4529 in terms of low cycle fatigue". The report clearly documents all relevant information concerning the technical performance of the contract, starting from the design of the experimental program, through the protocols of the experiments performed, to the summary evaluation of the program, including proposals for possible contract extension and follow-up experimental activities. Tato technická zpráva byla zpracována v rámci zakázky „OZM-LCF-2023: Experimentální hodnocení vlastností oceli 1.4529 z hlediska nízkocyklové únavy“. Ve zprávě jsou přehledně zdokumentovány všechny podstatné informace týkající se odborného plnění zakázky počínaje návrhem experimentálního programu, přes protokoly o provedených experimentech až po souhrnné vyhodnocení programu vč. návrhů pro případné rozšíření zakázky a navazující experimentální činnost. Keywords: material testing; low-cycle fatigue; austenitic stainless steels Available at various institutes of the ASCR
Contract summary report OZM-LCF-2023: Experimental evaluation of low cycle fatigue properties of steel 1.4529

This technical report was prepared within the framework of the contract "OZM-LCF-2023: Experimental evaluation of the properties of steel 1.4529 in terms of low cycle fatigue". The report clearly ...

Štefan, Jan; Parma, Slavomír
Ústav termomechaniky, 2023

Measurements on KR-D-11B Optimized Subsonic Blade Cascade
Šimurda, David; Hála, Jindřich
2023 - English
This report contains results and evaluation of aerodynamic measurements conducted on a subsonic compressor blade cascade. Keywords: compressor blade cascade; experiment; subsonic flow; optimized profile Available at various institutes of the ASCR
Measurements on KR-D-11B Optimized Subsonic Blade Cascade

This report contains results and evaluation of aerodynamic measurements conducted on a subsonic compressor blade cascade.

Šimurda, David; Hála, Jindřich
Ústav termomechaniky, 2023

Analysis of a 19th century mortar
Bauerová, Pavla; Frankeová, Dita; Slížková, Zuzana; Vondráčková, Michaela
2023 - Czech
Chemical and mineralogical composition of the binder and the aggregates of the mortar, using SEM-EDS and thermal analysis Chemické a mineralogické složení pojiva a plniva malty pomocí elektronové mikroskopie (SEM-EDS) a termické analýzy Keywords: SEM-EDS analysis; historic mortar; hydraulic lime; decalcification; carbonatization Available at various institutes of the ASCR
Analysis of a 19th century mortar

Chemical and mineralogical composition of the binder and the aggregates of the mortar, using SEM-EDS and thermal analysis

Bauerová, Pavla; Frankeová, Dita; Slížková, Zuzana; Vondráčková, Michaela
Ústav teoretické a aplikované mechaniky, 2023

2TDK Railway, profile P18. Datings. Final Report.
Bosák, Pavel; Zupan Hajna, N.; Hercman, H.; Horáček, I.; Kdýr, Šimon; Kogovšek, B.
2023 - English
Samples for datings were taken in the railway construction (2TDK) near village of Divača, Classical Karst on October 12, 2021: (1) vertebrate bones in cave 2TDK – 002 at the profile P18, cave entrance appeared during the construction operations on cleaned karst surface in a wall of karst depression. Samples of mammal bones and gastropods were collected in situ on cave bottom, and (2) pieces of speleothems occurring in non in situ position on artificially planated surface near the cave opening were collected. U-series: no numerical date was obtained as geochemistry of sample indicate open system, probably due to recrystallization of sample in soil cover. Paleomagnetism: The transition of N- and R-polarized samples cannot be identified more precisely as U-series radiometric dating yielded no numerical results. The transition easily can represent Brunhes/Matuyama boundary (at 773 ka) as well as any of older such transitions (e. g., base of Jaramillo, base of Olduvai). In any case the speleothem grew in a closed cave space with roof, probably as flowstone (inclusion of red soils above the base) and later as baldachin on eroded allogenic fill of the paleocave. Vertebrate paleontology: bone remains of small and larger vertebrates represent subrecent to Holocene species. Sorex alpinus represents the species quite rare in fossil record, but recetly limited to variegated woodland habitats with high surface humidity. A chamois Rupicapra rupicapra represents a resident species present in Slovenia throughout all stages of a glacial cycle, recently restricted to mountain habitats. Keywords: Divača Karst; unroofed cave; speleothem; U-Th dating; paleomagnetism; zoopaleontology Available at various institutes of the ASCR
2TDK Railway, profile P18. Datings. Final Report.

Samples for datings were taken in the railway construction (2TDK) near village of Divača, Classical Karst on October 12, 2021: (1) vertebrate bones in cave 2TDK – 002 at the profile P18, cave entrance ...

Bosák, Pavel; Zupan Hajna, N.; Hercman, H.; Horáček, I.; Kdýr, Šimon; Kogovšek, B.
Geologický ústav, 2023

Dynamic loading test of a pair of suspended footbridges for pedestrians and cyclists in the area of Dolní Vítkovice
Hračov, Stanislav; Urushadze, Shota; Macháček, Michael
2023 - Czech
The report describes the procedure and results of the dynamic loading test carried out at a pair of footbridges in Ostrava. The determined modal properties of the real structures are compared with the results of the theoretical modal analysis of their numerical models. The levels of the vibrations of the decks originated from pedestrians and runners are assessed with respect to their comfort and health. Zpráva popisuje postup provedení a výsledky dynamické zatěžovací zkoušky dvojice lávek pro pěší v Ostravě. Zjištěné modální vlastnosti skutečných konstrukcí jsou porovnány s výsledky teoretické modální analýzy jejich numerických modelů. Úroveň vibrací mostovek obou lávek od přechodů chodců a běžců je poté posouzena s ohledem na jejich pohodlí a zdraví. Keywords: footbridge; dynamic loading test; pedestrian load; vibration comfort criteria; tuned mass dampers Available at various institutes of the ASCR
Dynamic loading test of a pair of suspended footbridges for pedestrians and cyclists in the area of Dolní Vítkovice

The report describes the procedure and results of the dynamic loading test carried out at a pair of footbridges in Ostrava. The determined modal properties of the real structures are compared with the ...

Hračov, Stanislav; Urushadze, Shota; Macháček, Michael
Ústav teoretické a aplikované mechaniky, 2023

SMV-2023-03: Holder for field-emission cathodes
Knápek, Alexandr; Horáček, Miroslav; Klein, Pavel
2023 - Czech
The contract research (CR) deals with the development of a modular holder for the development and testing of field-emission cathodes under ultra-high vacuum conditions. The research combines knowledge from vacuum engineering, power electronics and surface physics to achieve a reliable device that allows working with field-emission cathodes under vacuum conditions in diode and triode configurations. The main deliverables for the customer are drawings that allow the apparatus to be replicated and one piece of working prototype that has been constructed within the CR to verify the function. Smluvní výzkum (SMV) se zabývá vývojem modulárního držáku pro vývoj a testování auto-emisních katod v podmínkách ultra-vysokého vakua. Výzkum kombinuje znalosti z vakuové techniky, silnoproudé elektrotechniky a povrchové fyziky k dosažení spolehlivého zařízení, které umožňuje pracovat s polně-emisními katodami ve vakuových podmínkách, a to v diodové a triodové konfiguraci. Hlavním výstupem pro objednavatele je výkresová dokumentace, která umožňuje aparaturu replikovat a dále jeden kus funkčního prototypu, který byl v rámci SMV zkonstruován k ověření funkcionality. Keywords: field-emission cathode holder; relief structure; modular holder Available at various institutes of the ASCR
SMV-2023-03: Holder for field-emission cathodes

The contract research (CR) deals with the development of a modular holder for the development and testing of field-emission cathodes under ultra-high vacuum conditions. The research combines knowledge ...

Knápek, Alexandr; Horáček, Miroslav; Klein, Pavel
Ústav přístrojové techniky, 2023

Evaluation of the risks of the terrain surface influencing from the point of view of geomechanical changes of the rock massif due to the flooding of the mining environment of the Ostrava and Petřvald sub-basins of the OKR by mine water - final report
Kajzar, Vlastimil
2023 - Czech
Attenuation of the remaining, still active mines of OKD company will mean the end of the primary reason for pumping mine water from mines, which is to ensure the safety of work and operation underground. At the same time, this eliminates the need to maintain the currently determined level of mine water in the already attenuated part of the Ostrava-Karviná district (OKR), i.e. in the Ostrava (ODP) and Petřvald (PDP) parts of the OKR, which are now ensured by the Jeremenko (ODP) and Žofie (PDP) water shafts. After the end of all activities in the OKR underground, the process of flooding of the abandoned mine could be started. The aim of this work is to determine the possible risks caused by geomechanical and rheological changes in the rock massif disturbed by mining activity and, above all, the associated possible risks of affecting the earth's surface. Útlum zbylých, dosud činných dolů OKD, a.s. bude znamenat zánik primárního důvodu čerpání důlních vod z dolů, kterým je zajištění bezpečnosti práce a provozu v podzemí. Zároveň se tím eliminuje potřeba udržování v současnosti stanovené hladiny důlních vod v již utlumené části ostravsko-karvinského revíru (OKR), tedy v ostravské (ODP) a petřvaldské (PDP) části OKR, kterou nyní zajišťují vodní jámy Jeremenko (ODP) a Žofie (PDP). Po ukončení veškerých aktivit v podzemí OKR by tak mohl být spuštěn proces zatápění opuštěných důlních prostor. Cílem této práce je stanovit možná rizika způsobená geomechanickými a reologickými změnami v horninovém masívu, porušeném hornickou činností a především s tím spojená možná rizika ovlivnění zemského povrchu. Keywords: risks of the terrain surface influencing; geomechanical changes; flooding of the mining environment Available on request at various institutes of the ASCR
Evaluation of the risks of the terrain surface influencing from the point of view of geomechanical changes of the rock massif due to the flooding of the mining environment of the Ostrava and Petřvald sub-basins of the OKR by mine water - final report

Attenuation of the remaining, still active mines of OKD company will mean the end of the primary reason for pumping mine water from mines, which is to ensure the safety of work and operation ...

Kajzar, Vlastimil
Ústav geoniky, 2023

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases