SMV-2023-61: Measuring systems for lithographers
Mikel, Břetislav
2023 - Czech
The contract research was focused on the development of multi-axis measuring systems using the most accurate method of measurement based on the principle of laser radiation interference. The basic reference is a laser source with a wavelength of 633 nm. Measuring systems are intended for devices requiring measurement accuracy in the order of nanometers. Smluvní výzkum byl zaměřen na vývoj víceosých odměřovacích systémů využívajících nejpřesnější způsob měření na principu interference laserového záření. Základní referencí je laserový zdroj o vlnové délce 633 nm. Odměřovací systémy jsou určeny do zařízení vyžadující přesnost měření v řádech nanometrů.
Keywords:
laser source; measurement of lenght; laser interferometry
Available at various institutes of the ASCR
SMV-2023-61: Measuring systems for lithographers
The contract research was focused on the development of multi-axis measuring systems using the most accurate method of measurement based on the principle of laser radiation interference. The basic ...
Optical and Pneumatic Measurements on TR-U-11 Cascade
Luxa, Martin; Hála, Jindřich; Šimurda, David
2023 - English
The report contains results and evaluation of conducted optical (interferometry and schlieren technique) and pneumatic measurements on the first variant of the new tip section, intended for turbine rotor blade.
Keywords:
transonic flow; rotor turbine blade; tip section
Available at various institutes of the ASCR
Optical and Pneumatic Measurements on TR-U-11 Cascade
The report contains results and evaluation of conducted optical (interferometry and schlieren technique) and pneumatic measurements on the first variant of the new tip section, intended for turbine ...
Design analysis of the heat exchanger between the primary and the intermediate circuits of the small modular reactor DAVID
Kobylka, D.; Hrubý, Jan; Kordík, Jozef; Gabriel, Dušan; Marek, René; Isoz, Martin
2023 - Czech
The report summarizes the joint results of the Department of Nuclear Reactors FNSPE, CTU and IT CAS, in the area of thermal and hydraulic calculations of the heat exchanger between the primary and intermediate circuits of the developed small modular reactor (SMR) DAVID. The assignment parameters were further specified during control days and with updated documentation. During the analysis of the initial system parameters, it was found that the original geometric configuration of the exchanger had a completely insufficient surface for heat transfer. A decision was made, several parameters were modified and based on a series of calculations using two independent simplified models, a reasonable configuration with a significantly smaller diameter of the tubes in a significantly larger number was chosen. The pressure losses on both sides of the heat exchanger are within normal ranges and will not cause problems with the construction of these circuits. Although there are differences between the results from both used models, their comparison shows that the chosen different calculation methods lead to approximately the same results and the models do not show fundamental errors.
Keywords:
small modular reactor DAVID; thermodynamics; heat exchanger
Available at various institutes of the ASCR
Design analysis of the heat exchanger between the primary and the intermediate circuits of the small modular reactor DAVID
The report summarizes the joint results of the Department of Nuclear Reactors FNSPE, CTU and IT CAS, in the area of thermal and hydraulic calculations of the heat exchanger between the primary and ...
SMV-2023-50: Fast hologram generation software development
Jákl, Petr; Šerý, Mojmír
2023 - Czech
Development of a software package for fast hologram generation in Python scripting environment and C/C++. The software allows for the creation of multiple foci in the focal plane and the generation of optical vortices on a pure phase spatial light modulator. Vývoj softwarového balíku pro rychlé generování hologramů ve skriptovacím prostředí Python a v jazyce C/C++. Software umožňuje vytvoření více fokusů v ohniskové rovině a generování optického víru na čistě fázovém prostorovém modulátoru světla.
Keywords:
spatial light modulator; phase hologram
Available at various institutes of the ASCR
SMV-2023-50: Fast hologram generation software development
Development of a software package for fast hologram generation in Python scripting environment and C/C++. The software allows for the creation of multiple foci in the focal plane and the generation of ...
SMV-2023-54: EM Nematodes II 2023
Hrubanová, Kamila
2023 - Czech
The aim of the contract research was the expert analysis of biological samples with the intention of describing morphological features for species classification. As part of the collaboration, chemical preparation of the samples was carried out, followed by observation of the bodies of the nematodes themselves in different positions so that individual morphological characters could be distinguished using an electron microscope. Cílem smluvního výzkumu byla odborná analýza biologických vzorků se záměrem popsat morfologické znaky pro druhovou klasifikaci. Součástí spolupráce byla provedena chemická příprava vzorků, následovalo pozorování těl samotných hlístic v různých pozicích tak, aby bylo možné rozlišit jednotlivé morfologické znaky pomocí elektronového mikroskopu.
Keywords:
nematodes; electron microscopy; morphological characterization
Available at various institutes of the ASCR
SMV-2023-54: EM Nematodes II 2023
The aim of the contract research was the expert analysis of biological samples with the intention of describing morphological features for species classification. As part of the collaboration, ...
SMV-2023-49: Optical tweezers upgrade
Jákl, Petr; Šerý, Mojmír
2023 - Czech
Modification and improvement of the procedures for controlling the custom-built optical tweezers apparatus, optimization of the procedures for the hardware control and ensuring compatibility with Windows 10 and LabVIEW 2016. Modifikace a vylepšení softwarového balíku pro ovládání aparatury optické pinzety - optimalizace procedur pro kontrolu hardware v aparatuře a zajištění kompatibility s Windows 10 a LabVIEW 2016.
Keywords:
optical tweezers; control software
Available at various institutes of the ASCR
SMV-2023-49: Optical tweezers upgrade
Modification and improvement of the procedures for controlling the custom-built optical tweezers apparatus, optimization of the procedures for the hardware control and ensuring compatibility with ...
SMV-2023-55: EM Nematodes I 2023
Hrubanová, Kamila
2023 - Czech
The aim of the contract research was the expert analysis of biological samples with the intention of describing morphological features for species classification. As part of the collaboration, chemical preparation of the samples was carried out, followed by observation of the bodies of the nematodes themselves in different positions so that individual morphological characters could be distinguished using an electron microscope. Cílem smluvního výzkumu byla odborná analýza biologických vzorků se záměrem popsat morfologické znaky pro druhovou klasifikaci. Součástí spolupráce byla provedena chemická příprava vzorků, následovalo pozorování těl samotných hlístic v různých pozicích tak, aby bylo možné rozlišit jednotlivé morfologické znaky pomocí elektronového mikroskopu.
Keywords:
nematodes; electron microscopy; morphological characterization
Available at various institutes of the ASCR
SMV-2023-55: EM Nematodes I 2023
The aim of the contract research was the expert analysis of biological samples with the intention of describing morphological features for species classification. As part of the collaboration, ...
SMV-2023-57: EM analysis of microorganisms II
Hrubanová, Kamila
2023 - Czech
The aim of the contract research was the expert analysis of microbiological samples with biotechnological significance with the intention of describing the ultrastructure of the cells, which depends on the cultivation conditions of the industrial process. The collaboration included cryogenic preparation of samples, followed by microbial microscopy using low-temperature electron microscopy (cryo-SEM), and selected samples were processed for transmission electron microscopy (TEM). Furthermore, spectroscopic measurements were performed using Raman spectroscopy. Cílem smluvního výzkumu byla odborná analýza mikrobiologických vzorků s biotechnologickým významem se záměrem popsat ultrastrukturu buněk, která se odvíjí od kultivačních podmínek průmyslového procesu. Součástí spolupráce byla provedena kryogenní příprava vzorků, následovalo mikrobů pomocí elektronového mikroskopu za nízkých teplot (cryo-SEM), vybrané vzorky byly zpracovány i pro transmisní elektronovou mikroskopii (TEM). Dále byla provedena spektroskopická měření pomocí Ramanovy spektroskopie.
Keywords:
microorganisms; electron microscopy; TEM; Raman spectroscopy; biotechnology
Available at various institutes of the ASCR
SMV-2023-57: EM analysis of microorganisms II
The aim of the contract research was the expert analysis of microbiological samples with biotechnological significance with the intention of describing the ultrastructure of the cells, which depends ...
SMV-2023-19: Development of welding and brazing joints for special industrial fittings
Zobač, Martin; Vlček, Ivan; Dupák, Libor; Rončák, Ján; Zobačová, Jitka
2023 - Czech
This project aims to find the optimal technological procedure for welding and brazing of thermal inserts in an automatic steam condensate drain. This project builds on previous research and efforts in the field. It builds on previous work and aims to improve the manufacturing and maintenance process of steam condensate removal equipment by using new welding and brazing processes for thermal liners. Cílem tohoto projektu je najít optimální technologický postup pro svařování a pájení termických vložek v automatickém odváděči parního kondenzátu. Tento projekt staví na předchozím výzkumu a snahách v oboru. Navazuje na předchozí práci a má za cíl zdokonalit proces výroby a údržby zařízení pro odvádění parního kondenzátu pomocí nových postupů svařování a pájení termických vložek.
Keywords:
electron beam welding; vacuum brazing
Available at various institutes of the ASCR
SMV-2023-19: Development of welding and brazing joints for special industrial fittings
This project aims to find the optimal technological procedure for welding and brazing of thermal inserts in an automatic steam condensate drain. This project builds on previous research and efforts in ...
SMV-2023-22: Development of welding joints for mechanical assemblies for sensors
Zobač, Martin; Vlček, Ivan; Dupák, Libor; Rončák, Ján; Zobačová, Jitka
2023 - Czech
The subject of the project was the research and development of permanent joints of the mechanical assemblies by electron beam welding for sensors. The outcome of the project was specific technological procedures for the given assemblies verified by tests. Předmětem řešeného projektu byl výzkum a vývoj nerozebiratelných spojů mechanických sestav s využitím technologie svařování elektronovým svazkem s využitím v sensorice. Výsledkem projektu byly konkrétní technologické postupy pro dané sestavy ověřené na zkušebních sériích.
Keywords:
electron beam welding; sensors
Available at various institutes of the ASCR
SMV-2023-22: Development of welding joints for mechanical assemblies for sensors
The subject of the project was the research and development of permanent joints of the mechanical assemblies by electron beam welding for sensors. The outcome of the project was specific technological ...
NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web
Send your suggestions and comments to nusl@techlib.cz
Provider
Other bases