Ne (33574)
Ano (4334)
Počet nalezených dokumentů:
37908
Publikováno od
do
Approaches to the computational modelling of soft tissues related to cutting
2024 -
Klíčová slova:
měkké tkáně; výpočetní modelování; simulace
Plné texty jsou dostupné v knihovně ZČU.
Approaches to the computational modelling of soft tissues related to cutting
Voice-Interactive Semantic Search Interface with Vector Databases
2024 -
Klíčová slova:
sémantické vyhledávání; vektorová databáze; hlas
Plné texty jsou dostupné v knihovně ZČU.
Voice-Interactive Semantic Search Interface with Vector Databases
Image Domain Transfer for Liver Analysis in Histology
2024 -
Klíčová slova:
CycleGAN; převod domény obrázku; játra; histologie
Plné texty jsou dostupné v knihovně ZČU.
Image Domain Transfer for Liver Analysis in Histology
Deep learning methods for Motor Imagery EEG Signal Classification
2024 -
Klíčová slova:
hluboké učení; EEG signal; motor
Plné texty jsou dostupné v knihovně ZČU.
Deep learning methods for Motor Imagery EEG Signal Classification
Mobilní aplikace pro včelaře
2024 -
Klíčová slova:
včelař; mobilní aplikace; monitorování
Plné texty jsou dostupné v knihovně ZČU.
Mobilní aplikace pro včelaře
Finite element approximation of fluid structure interaction using Taylor-Hood and Scott-Vogelius elements
Vacek, Karel; Sváček, P.
2024 - anglický
This paper addresses the problem of fluid flow interacting a vibrating solid cylinder described by one degree of freedom system and with fixed airfoil. The problem is described by the incompressible Navier-Stokes equations written in the arbitrary Eulerian-Lagrangian (ALE) formulation. The ALE mapping is constructed with the use of a pseudo-elastic approach. The flow problem is numerically approximated by the finite element method (FEM). For discretization of the fluid flow, the results obtained by both the Taylor-Hood (TH) element and the Scott-Vogelius (SV) finite element are compared. The TH element satisfies the Babuška-Brezzi inf-sup condition, which guarantees the stability of the scheme. In the case of the SV element the mesh, that is created as a barycentric refinement of regular triangulation, is used to satisfy the Babuška-Brezzi condition. The numerical results for two benchmark problems are shown.
Klíčová slova:
finite element method; arbitrary Lagrangian-Eulerian method; Scott-Vogelius element; Taylor-Hood element
Plné texty jsou dostupné v digitálním repozitáři Akademie Věd.
Finite element approximation of fluid structure interaction using Taylor-Hood and Scott-Vogelius elements
This paper addresses the problem of fluid flow interacting a vibrating solid cylinder described by one degree of freedom system and with fixed airfoil. The problem is described by the incompressible ...
Microstructure modifications of Al-Si-coated press-hardened steel 22MnB5 by laser welding
Šebestová, Hana; Horník, Petr; Mika, Filip; Mikmeková, Šárka; Ambrož, Ondřej; Mrňa, Libor
2024 - anglický
Weld microstructure depends on the characteristics of welded materials and parameters of welding technology, especially on the heat input that determines the peak temperature and the cooling rate. When the coated sheets are welded, the effect of the chemical composition of the coating must be also considered even though its thickness is only a few tens of microns. During 22MnB5+AlSi laser welding experiments, the ferrite-stabilizing elements of coating modified the weld metal microstructure. Ferrite appeared in a quenched weld metal. The rapid cooling rate accompanying welding with a focused beam limited the homogenization of the weld metal which resulted in the formation of ferritic bands in the regions rich in Si and especially in Al. On the other hand, a high level of homogenization was reached when welding with the defocused beam. The ferritic islands uniformly distributed in the weld metal were formed at 0.4 wt% and 1.6 wt% of Si and Al, respectively. The doubled heat input reduced the Al content to 0.7 wt% insufficient for the ferrite formation at still relatively high cooling rates. Predicting the distribution of ferrite in the weld metal is challenging due to its dependence on various factors, such as cooling rate and the volume of dissolved coating, which may vary with any modifications made to the welding parameters.
Klíčová slova:
laser welding; high-strength steel; microstructure; heat input; ferrite stabilization
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Microstructure modifications of Al-Si-coated press-hardened steel 22MnB5 by laser welding
Weld microstructure depends on the characteristics of welded materials and parameters of welding technology, especially on the heat input that determines the peak temperature and the cooling rate. ...
Influence of ball material on the resulting fatigue life of thermal sprayed HVOF coatings in dynamic impact testing
Duliškovič, J.; Daniel, Josef; Houdková, Š.
2024 - anglický
Dynamic impact wear, i.e. contact between two components in the presence of high cyclic local loads, is a challenging failure mode that occurs in many mechanical applications. Many previous studies have confirmed that dynamic impact testing is suitable for evaluating the contact fatigue of thermal sprayed coatings. However, the effect of the test parameters on the resulting lifetime is unclear. The aim of this study describes the effect of the ball material used in the dynamic impact test on the resulting fatigue life of the HVOF thermal sprayed coating. Three test balls made of WC/Co alloy, Si3N4 silicon nitride and 440 C steel were chosen for this study. Dynamic impaction testing was carried out on the Cr3C2-NiCr coating, which was sprayed by HVOF on a 1.2376 high-speed steel substrate. The impact lifetime was described by the number of critical impacts, i.e. the number of impacts before coating fatigue occurs. Furthermore, the depth and volume of impact craters were measured. Using scanning electron microscopy (SEM), the surface of the impacts as well as the microstructure of the coating on the cross-section in the region of the impacts were observed. Furthermore, the mechanism of crack propagation in the coating and the microstructure of the indentor were investigated.
Klíčová slova:
dynamic impact test; HVOF; Cr3C2-NiCr; fatigue
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Influence of ball material on the resulting fatigue life of thermal sprayed HVOF coatings in dynamic impact testing
Dynamic impact wear, i.e. contact between two components in the presence of high cyclic local loads, is a challenging failure mode that occurs in many mechanical applications. Many previous studies ...
Functional Tungsten-based thin films and their characterization
Košelová, Zuzana; Horáková, L.; Sobola, Dinara; Burda, Daniel; Knápek, Alexandr; Fohlerová, Z.
2024 - anglický
Anodizing is a technique by which thin oxide layers can be formed on a surface. Thin oxide layers have been found to be useful in a variety of applications, including emitters of electrons. Tungsten is still a common choice for cold field emitters in commercial microscopy applications. Its suitable quality can be further improved by thin film deposition. Not only the emission characteristic can be improved, but also the emitter operating time can be extended. Tungsten oxide is known for its excellent resistance to corrosion and chemical attack due to its stable crystal structure and strong chemical bonds between tungsten and oxygen atoms. Many techniques with different advantages and disadvantages have been used for this purpose. Anodization was chosen for this work because of the controllable uniform coverage of the material and its easy availability without the need for expensive complex equipment. The anodizing process involves applying an electrical potential to tungsten while it is immersed in an electrolyte solution. This creates a thin layer of tungsten oxide on the surface of the metal. The thickness and properties of the resulting oxide layer can be controlled by adjusting the anodization conditions, such as the electrolyte solution, voltage, and the duration of the process. In this work, H3PO4 was used as the electrolyte to test whether these tungsten oxide layers would be useful for electron emitters, for use in electron guns and other devices that require high-quality electron emitters. The properties were evaluated using appropriate techniques. In general, anodization of tungsten to form thin layers of tungsten oxide layers is a promising technique for producing high quality electron emitters.
Klíčová slova:
cold-field emission; thin layer deposition; tungsten oxide; resonance enhanced tunneling; anodization
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Functional Tungsten-based thin films and their characterization
Anodizing is a technique by which thin oxide layers can be formed on a surface. Thin oxide layers have been found to be useful in a variety of applications, including emitters of electrons. Tungsten ...
Termokamery jako prostředek pro oživení výuky matematiky
2024 -
Termokamery nemají využití pouze v předmětech jako je
fyzika, biologie či chemie. Navrhli jsme možnosti, jakým způ sobem termokamery zařadit do výuky matematiky s cílem
zatraktivnění klasického vyučování a využití mezioborových
vztahů. Metody, které jsme zvolili, neslouží k přímému osvo jování matematických poznatků, jsou vhodné spíše k procvi čení učiva zábavnou formou s využitím moderních technolo gií.
Klíčová slova:
matematika; výuka; termokamera
Plné texty jsou dostupné v knihovně ZČU.
Termokamery jako prostředek pro oživení výuky matematiky
Termokamery nemají využití pouze v předmětech jako je fyzika, biologie či chemie. Navrhli jsme možnosti, jakým způ sobem termokamery zařadit do výuky matematiky s cílem zatraktivnění klasického ...
NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.
Vaše náměty a připomínky posílejte na email nusl@techlib.cz
Provozovatel
Zahraniční báze