Ne (399)
Ano (48)
Počet nalezených dokumentů:
447
Publikováno od
do
Heat and Particle Deposition on the Plasma-Facing Components
Podolník, Aleš; Pánek, Radomír; Komm, Michael; Dejarnac, Renaud; Gunn, J. P.
2013 - anglický
The interaction of plasma with plasma-facing components (PFCs) in tokamaks is of increasing interest because of implications for ITER and next-step devices. The heat and particle fluxes interacting with solid objects can be studied by means of particle-in-cell (PIC) simulations. The aim of this work is to use the existing family of PIC codes SPICE to simulate the heat and particle flux distribution on PFCs. The output of the simulations is then used in new heat equation solver, which calculates the temperature of the PFCs. This solver provides us a testbed for the parallel sparse matrix code development as well as for the complex application aimed at study of the melting of tiles.
Klíčová slova:
plasma; tokamak; ITER
Dokument je dostupný na externích webových stránkách.
Heat and Particle Deposition on the Plasma-Facing Components
The interaction of plasma with plasma-facing components (PFCs) in tokamaks is of increasing interest because of implications for ITER and next-step devices. The heat and particle fluxes interacting ...
Comparison of holographic setups used in heat and mass transfer measurement
Doleček, Roman; Psota, Pavel; Lédl, Vít; Vít, Tomáš; Kopecký, V.
2013 - anglický
The authors of the paper deal with measurement of heat and mass transfer for several years and they have frequently used few techniqes for measurement of refractive index distribution based on holographic interferometry. Some of the well known techniques have been modified some and some new ones developped. Every technique could be applied with success in different type of meassurement and obviously every one has set of properties making them unique. We decided to digest few different basic techniques and describe its properties in this paper with the aim to help the reader select the proper one for their measurement. The list of techniques and its properties is not comprehensive but schould serve as a basic orientation in the field.
Klíčová slova:
Digital holography; Holographic setup; Heat and mass transfer measurement
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Comparison of holographic setups used in heat and mass transfer measurement
The authors of the paper deal with measurement of heat and mass transfer for several years and they have frequently used few techniqes for measurement of refractive index distribution based on ...
Measurement of Vibration Mode Structure for Adaptive Vibration Suppression System by Digital Holography
Psota, Pavel; Lédl, Vít; Doleček, Roman; Mokrý, P.; Kopecký, V.
2013 - anglický
Previously the frequency-shifted digital holographic interferometry (FSDHI) for measurement of vibration amplitudes in range of nanometers was introduced and verified by authors [1,2]. The method FSDHI addressed some of the drawbacks of the conventional methods and was used mainly for piezoelectric transformer vibration amplitudes and mode structures measurement [3]. The limiting factor for application of this method is the maximal measured value of the vibration amplitude without the risk of ambiguity. The value is approximately 80nm for the frequency doubled Nd: YAG line. Since FSDHI enables us to precisely measure vibration amplitudes over the whole inspected area with very high lateral resolution, it could also be a very useful tool for measurement of vibration amplitudes and mode structures for research in the field of adaptive suppression systems. Such a measurement would provide a necessary feedback about the system behavior.This was the reason why we put an effort
Klíčová slova:
digital holography; vibration measurement; vibration suppression
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Measurement of Vibration Mode Structure for Adaptive Vibration Suppression System by Digital Holography
Previously the frequency-shifted digital holographic interferometry (FSDHI) for measurement of vibration amplitudes in range of nanometers was introduced and verified by authors [1,2]. The method ...
Design, manufacture and test of M1 and M2 mirror production
Lédl, Vít; Melich, Radek; Pintr, Pavel; Polák, Jaroslav; Procháska, František; Psota, Pavel; Rail, Zdeněk; Steiger, Lukáš; Tomka, David; Václavík, Jan; Vápenka, David; Vít, Tomáš; Bartoníček, Jiří
2013 - anglický
Design and tests for realization of M1 and M2 mirrors for METIS project.
Klíčová slova:
METIS; lightweingted mirrors; low microroughness
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Design, manufacture and test of M1 and M2 mirror production
Design and tests for realization of M1 and M2 mirrors for METIS project.
Preparation of multiphase materials with spark plasma sintering
Mušálek, Radek; Dlabáček, Zdeněk; Vilémová, Monika; Pala, Zdeněk; Matějíček, Jiří; Chráska, Tomáš
2013 - anglický
Spark plasma sintering (SPS), also called Field Assisted Sintering Technique (FAST), represents a novel method of preparation of sintered materials from powders. The main advantage of the SPS method is a high achievable heat rate (>200 °C/min) and high sintering temperatures (up to 2200 °C in our laboratory). Combination of high heating rate, rather high pressures (up to 80 MPa) and electric field fluctuations leads to an effective sintering and significant reduction of sintering time for both coarse-grained and nanocrystalline powders. Composite materials may be easily obtained by mixing or layering of different powders. The paper will introduce several examples of multiphase materials sintered by SPS at our institute and the establishment of procedures for routine testing of sub-sized specimens.
Klíčová slova:
spark plasma sintering; powder metallurgy; composites; multiphase materials; FeAl matrix
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Preparation of multiphase materials with spark plasma sintering
Spark plasma sintering (SPS), also called Field Assisted Sintering Technique (FAST), represents a novel method of preparation of sintered materials from powders. The main advantage of the SPS method ...
First measurements with U-probe on the COMPASS tokamak
Kovařík, Karel; Ďuran, Ivan; Stöckel, Jan; Seidl, Jakub; Šesták, David; Brotánková, J.; Spolaore, M.; Martines, E.; Vianello, N.
2013 - anglický
A complex electrostatic-magnetic probe diagnostics, baptized as ‘U-probe’, has been installed on COMPASS tokamak recently. Probe composes of two identical towers. Each tower houses 3 radially spaced sets of 3D coils, triple probe and rake probe – array of six Langmuir probes. The U-probe measures electric and magnetic properties of the filamentary structures in the edge plasma, particularly the floating potential profile and local magnetic field within the plasma filaments. Contribution presents first tests and results obtained.
Klíčová slova:
plasma; tokamak
Dokument je dostupný na externích webových stránkách.
First measurements with U-probe on the COMPASS tokamak
A complex electrostatic-magnetic probe diagnostics, baptized as ‘U-probe’, has been installed on COMPASS tokamak recently. Probe composes of two identical towers. Each tower houses 3 radially spaced ...
Dust Observation in the COMPASS Tokamak Using Fast Camera
Odstrčil, M.; Mlynář, Jan; Weinzettl, Vladimír; Háček, Pavel; Berta, M.; Szabolics, T.; Bencze, A.
2013 - anglický
The dust grains were observed over a thousand discharges in the tokamak COMPASS. A novel method for semi-automatic extraction and tracking of dust grains using a relatively low frame-rate camera (370 fps) was proposed. Radiation lifetime, time evolution and the acceleration of the dust grains were studied. The measured dust velocities roughly correspond to a simple model. However, slow dust particles are signicantly aected by local plasma properties and initial release conditions that cannot be determined in our experiment
Klíčová slova:
COMPASS; tokamak
Dokument je dostupný na externích webových stránkách.
Dust Observation in the COMPASS Tokamak Using Fast Camera
The dust grains were observed over a thousand discharges in the tokamak COMPASS. A novel method for semi-automatic extraction and tracking of dust grains using a relatively low frame-rate camera ...
Possible way to prepare nanoparticles from aerosols released at plasma deposition
Brožek, Vlastimil; Mastný, L.; Moravec, Pavel; Ždímal, Vladimír
2012 - anglický
During plasma deposition of powdered metals or inorganic compounds using WSP® generator, they interact with the plasma having temperature between 25000 and 30000 K. As a result, they melt, evaporate, thermally decompose, get ionized and/or react chemically both with plasma-forming medium and with the surrounding atmosphere or carrier gas. An experimental apparatus was constructed enabling us to capture aerosol particles emitted from the surface of the free flying particles (FFP) heated in a stream of plasma. In this work we studied content, composition and size distribution of nanosized particles of Ag and oxides of Al, Ti, Cr and W, released during plasma deposition process. These particles were analyzed by dynamic light scattering - photon correlation spectroscopy using instrument MALVERN, and with aerosol spectrometers SMPS 3936 and APS 3321.Concentration of aerosols containing nanoparticles of silver or metal oxides with diameters below 100 nm was found to be in the range 85 to
Klíčová slova:
plasma spraying; aerosol technology; nanoparticles production; measurement of particle size distribution
Dokument je dostupný na externích webových stránkách.
Possible way to prepare nanoparticles from aerosols released at plasma deposition
During plasma deposition of powdered metals or inorganic compounds using WSP® generator, they interact with the plasma having temperature between 25000 and 30000 K. As a result, they melt, evaporate, ...
Development of large aperture elements for active and adaptive optics
Kmetík, Viliam; Nemcová, S.; Jiran, L.; Stranakova, E.; Inneman, A.
2012 - anglický
Large-aperture elements for laser active and adaptive optics are investigated in collaboration within IOP AcSci CR, FEng CTU and 5M. A bimorph deformable mirror for high-power lasers based on a lightweight structure with a composite core is currently in development. In order to realize a sufficiently large working aperture we are using new technologies for production of core, bimorph actuator and DM reflector. Detailed simulation of components and structure is validated by measurement and testing. A research of DM actuation and response of a complicated mirror structure needed for an accurate control of a deformation is performed. Testing of samples and subscale measurements are currently performed, measurement of a complete structureis in preparation
Klíčová slova:
laser active and adaptive optics
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Development of large aperture elements for active and adaptive optics
Large-aperture elements for laser active and adaptive optics are investigated in collaboration within IOP AcSci CR, FEng CTU and 5M. A bimorph deformable mirror for high-power lasers based on a ...
Photonometers for coating and sputtering machines
Oupický, Pavel; Jareš, Daniel; Václavík, Jan; Vápenka, David
2012 - anglický
The concept of photonometers (alternative name of optical monitor of a vacuum deposition process)for coating and sputtering machines is based on photonometers produced by companies like SATIS or HV Dresden. Photometers were developed in the TOPTEC centre and its predecessor VOD (Optical Development Workshop of Institut of Plasma Physics AS CR) for more than 10 years. The article describes current status of the technology and ideas which will be incorporated in next development steps. Hardware and software used on coating machines B63D, VNA600 and sputtering machine UPM810 is presented.
Klíčová slova:
photonometers
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Photonometers for coating and sputtering machines
The concept of photonometers (alternative name of optical monitor of a vacuum deposition process)for coating and sputtering machines is based on photonometers produced by companies like SATIS or HV ...
NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.
Vaše náměty a připomínky posílejte na email nusl@techlib.cz
Provozovatel
Zahraniční báze