Used filters (2)  Zrušit všechna omezení
Number of found documents: 28502
Published from to

Electrochemically Investigated pH-dependent Redox Properties of Copper Complexes of Azamacrocyclic Ligands
Koláčná, Lucie; Maďar, M.; Kubíček, V.; Ludvík, Jiří
2023 - Czech
Investigated Cu(II) complexes are based on plain or cross-bridged cyclam. The\nelectrochemically inactive cyclam was modified by carboxylate, phosphonate, or phenolate\npendant arms. Cu(II) represents the main redox center of the complexes. Modification of the\nligand causes a changed pattern of complex redox response in buffered aqueous solution.\nIrreversible Cu(II) reduction results in complex decomposition to amalgamated copper and\nligand in excess. After Cu(0) electrochemical in situ re-oxidation, copper and ligand are recomplexed.\nComplexes undergo isomerization, accelerated by increasing the temperature. The\ninfluence of pH on complex isomerization and the reversibility of its reduction was described. Molekulární elektronika je progresivní směr moderní materiálové chemie. Zabývá se vývojem\nelektronických prvků na úrovni jedné molekuly. Nejdůmyslnější molekulární elektroniku\nnajdeme v přírodě v podobě metaloenzymů. Jedním ze směrů výzkumu jejich modelů jsou\nkomplexy různě substituovaných azamakrocyklů. Předností těchto molekul je jejich stabilita a\ndobře definovaná syntéza. Keywords: cyclam; Cu(II) complexes; pendant arms Available on request at various institutes of the ASCR
Electrochemically Investigated pH-dependent Redox Properties of Copper Complexes of Azamacrocyclic Ligands

Investigated Cu(II) complexes are based on plain or cross-bridged cyclam. The\nelectrochemically inactive cyclam was modified by carboxylate, phosphonate, or phenolate\npendant arms. Cu(II) represents ...

Koláčná, Lucie; Maďar, M.; Kubíček, V.; Ludvík, Jiří
Ústav fyzikální chemie J. Heyrovského, 2023

Determination of Selected Natural Psychoactive Substances in Organic Matrices at 3D Printed Electrodes
Choińska-Mlynarczyk, Marta; Šestáková, Ivana; Navrátil, Tomáš
2023 - English
Psilocybin and its derivative psilocin are popular psychoactive substances both as experimental\ntreatments in clinical trials and as illicit drugs. Their potential ability to influence the human\nbrain entails the need for a fast, inexpensive, selective, and sensitive method of their\ndetermination. The aim of our study was the development of new 3D-printed electrodes which\nfulfill these demands and are useful for medical, toxicological, and forensic purposes.\nSuccessful development allows determining in real matrices (human plasma and dried\nmushrooms) concentrations of the order of 1 μmol dm-3.\n Keywords: natural psychoactive substances; 3D-printed electrodes; psilocin; psilocybin Available on request at various institutes of the ASCR
Determination of Selected Natural Psychoactive Substances in Organic Matrices at 3D Printed Electrodes

Psilocybin and its derivative psilocin are popular psychoactive substances both as experimental\ntreatments in clinical trials and as illicit drugs. Their potential ability to influence the ...

Choińska-Mlynarczyk, Marta; Šestáková, Ivana; Navrátil, Tomáš
Ústav fyzikální chemie J. Heyrovského, 2023

Epidemiologické modely s agenty
Neruda, Roman
2023 - Czech
Tento příspěvek je jemným úvodem do problematiky agentních modelů a jejich aplikací v epidemiologickém modelování. Představíme agentní modely jednak z hlediska informatiky, jednak jako nástroj modelování v jiných vědních disciplínách. V příkladové studii ukážeme model s agenty a sociální sítí jejich kontaktů, který slouží pro simulaci vývoje epidemie a vlivu protiepidemických opatření. Available at various institutes of the ASCR
Epidemiologické modely s agenty

Tento příspěvek je jemným úvodem do problematiky agentních modelů a jejich aplikací v epidemiologickém modelování. Představíme agentní modely jednak z hlediska informatiky, jednak jako nástroj ...

Neruda, Roman
Ústav informatiky, 2023

Design precipitation in Czech river basins
Müller, Miloslav; Kašpar, Marek; Hulec, Filip
2023 - Czech
Data on rainfall intensity on the territory of the Czech Republic with a horizontal resolution of 1 km2 and a time step of 10 minutes, obtained by adjusting radar estimates with data from rain gauge stations, were used to derive design areal precipitation in the Czech river basins of 1st to 4th order and in the basins of surface water bodies. When the rainfall accumulation time is doubled, the design precipitation total in individual pixels increases by about 20% on average. The magnitude of the design totals decreases with increasing catchment area, especially for shorter accumulation periods. Data o srážkové intenzitě na území Česka s horizontálním rozlišením 1 km2 a časovým krokem 10 minut, získaná adjustací radarových odhadů daty ze srážkoměrných stanic, posloužila k odvození návrhových plošných srážek v českých povodích I. až IV. řádu a v povodích útvarů povrchových vod. Při zdvojnásobení doby akumulace srážky vzroste návrhový úhrn v jednotlivých pixelech v průměru o cca 20 %. S rostoucí plochou povodí velikost návrhových úhrnů klesá, a to především v případě kratších dob akumulace. Keywords: design precipitation; catchment; return period Available at various institutes of the ASCR
Design precipitation in Czech river basins

Data on rainfall intensity on the territory of the Czech Republic with a horizontal resolution of 1 km2 and a time step of 10 minutes, obtained by adjusting radar estimates with data from rain gauge ...

Müller, Miloslav; Kašpar, Marek; Hulec, Filip
Ústav fyziky atmosféry, 2023

Research on the history of Czech book illustration in a new way. Online database of e-illustration and possibilities of its use
Šícha, Vojtěch; Heilandová, L.
2023 - Czech
The paper is focused on presenting the intentions and goals of the project Czech Book Illustration in the Early Modern Age and its main result, which is the online accessible E-Illustration database. Příspěvek je zaměřen na představení záměrů a cílů projektu Česká knižní ilustrace v raném novověku a jeho hlavního výsledku, jímž je online přístupná databáze E-Ilustrace. Keywords: book illustration; Czech book culture; databases; projects; 15th-16th century Available at various institutes of the ASCR
Research on the history of Czech book illustration in a new way. Online database of e-illustration and possibilities of its use

The paper is focused on presenting the intentions and goals of the project Czech Book Illustration in the Early Modern Age and its main result, which is the online accessible E-Illustration database.

Šícha, Vojtěch; Heilandová, L.
Knihovna AV ČR, 2023

Flow cytometric method to monitor the viability of microbial populations in drinking water
Maršálková, Eliška; Makieieva, Y.; Kovar, K.
2023 - Czech
The microbiome of natural water from an artesian well (i.e., bottled water of this origin) was characterised using a method combining staining with fluorescence dyes and cell counting by flow cytometry. These investigations revealed the microbial fingerprint of such high-quality drinking water (i.e., containing about 14 thousands cells per mL) as well as changes in total cell count (TCC), dead cell count (DCC) and the ratio of living cells with high (HNA) and low (LNA) nucleic acid content. Hydrogen peroxide, ozone, and free radicals were produced in water exposed to CaviPlazma, while cell viability was reduced, both within the original microbiome and in an inoculated laboratory culture of E. coli. In this treated water, microbial cells died, total cell counts decayed by lysis and dissolved assimilable carbon (AOC) increased. Unique findings from these laboratory experiments facilitate our understanding of the effects of oxidation processes on the viability of microorganisms as well as the potential future use of these technologies for drinking water disinfection and protection against regrowth of possible contaminants. Mikrobiom přírodní vody z artéského vrtu (tj. balené vody tohoto původu) byl charakterizován metodou kombinující fluorescenční barvení buněk a počítání buněk průtokovou cytometrií. Byla sledována změna celkového počtu buněk (TCC) (mikrobiální „otisk prstu“), počtu buněk mrtvých (DCC) a poměr živých buněk s vysokým (HNA) a nízkým (LNA) obsahem nukleových kyselin. Tato pitná voda (tj. obsahující přibližně 14 tisíc buněk na ml) byla upravena technologií CaviPlazmy, při které vznikají peroxid vodíku, ozón a volné radikály. Touto metodou se snižovala životaschopnost (viabilita) mikrobiálních buněk, jak z původního mikrobiomu, tak přidané laboratorní kultury E. coli. Buňky odumíraly, jejich celkový počet se snížil, buňky také lyzovaly a zvyšoval se tak obsah asimilovatelného uhlíku (AOC) v ošetřené vodě. Poznatky z těchto laboratorních pokusů přispívají k porozumění vlivu oxidačních procesů na životaschopnost mikrobiálních buněk a možného budoucího využití těchto technologií pro dezinfekci a ochranu proti opětovnému růstu možných kontaminantů. Keywords: microbiom; flow cytometry; BactoSense device; cells vitality Available on request at various institutes of the ASCR
Flow cytometric method to monitor the viability of microbial populations in drinking water

The microbiome of natural water from an artesian well (i.e., bottled water of this origin) was characterised using a method combining staining with fluorescence dyes and cell counting by flow ...

Maršálková, Eliška; Makieieva, Y.; Kovar, K.
Botanický ústav, 2023

One thousand and fifty years of the Bishopric of Prague
Kotous, J.; Sommer, Petr; Vaníček, V.
2023 - Czech
The book is dedicated to the 1050th anniversary of the foundation of the Prague bishopric. The first block of studies places the topic of the first Czech diocese in the Central European context of the Carolingian and Ottonian empires, the related ecclesiastical institutions and the Christianization processes in their individual parts, e.g. among the Polabian Slavs. The second block of texts traces the processes leading to the building of the foundations of the Bohemian diocese, its establishment and its continuity with the Great Moravian ecclesiastical beginnings. Equally important are the probes tracing the process of Christianization of Czech society, the relationship between the Prague bishops and the Czech ruler, and the emergence of church organization. The book concludes with studies tracing the Czech and Moravian bishoprics at the turning points of the Hussite and Reformation periods, the Recatholization and the reforms of Joseph II. Kniha věnovaná 1050. výročí založení pražského biskupství. První blok studií zasazuje téma první české diecéze do středoevropských souvislostí karolínské a otonské říše, souvisejících církevních institucí a christianizačních procesů v jejich jednotlivých částech, např. u Polabských Slovanů. Druhý blok textů sleduje procesy směřující k budování základů české diecéze, jejího založení a ke sledování její návaznosti na velkomoravské církevní začátky. Neméně důležité jsou sondy sledující proces christianizace české společnosti, vztah pražských biskupů a českého panovníka i vznik církevní organizace. Knihu uzavírají studie sledující česká a moravská biskupství ve zlomových dobách husitství a reformace, rekatolizace a v době reforem Josefa II. Keywords: Christianity; Prague; Bishopric of Prague; Christianisation; hagiography; medieval Czech lands Available at various institutes of the ASCR
One thousand and fifty years of the Bishopric of Prague

The book is dedicated to the 1050th anniversary of the foundation of the Prague bishopric. The first block of studies places the topic of the first Czech diocese in the Central European context of the ...

Kotous, J.; Sommer, Petr; Vaníček, V.
Filosofický ústav, 2023

SMV-2023-50: Fast hologram generation software development
Jákl, Petr; Šerý, Mojmír
2023 - Czech
Development of a software package for fast hologram generation in Python scripting environment and C/C++. The software allows for the creation of multiple foci in the focal plane and the generation of optical vortices on a pure phase spatial light modulator. Vývoj softwarového balíku pro rychlé generování hologramů ve skriptovacím prostředí Python a v jazyce C/C++. Software umožňuje vytvoření více fokusů v ohniskové rovině a generování optického víru na čistě fázovém prostorovém modulátoru světla. Keywords: spatial light modulator; phase hologram Available at various institutes of the ASCR
SMV-2023-50: Fast hologram generation software development

Development of a software package for fast hologram generation in Python scripting environment and C/C++. The software allows for the creation of multiple foci in the focal plane and the generation of ...

Jákl, Petr; Šerý, Mojmír
Ústav přístrojové techniky, 2023

SMV-2023-54: EM Nematodes II 2023
Hrubanová, Kamila
2023 - Czech
The aim of the contract research was the expert analysis of biological samples with the intention of describing morphological features for species classification. As part of the collaboration, chemical preparation of the samples was carried out, followed by observation of the bodies of the nematodes themselves in different positions so that individual morphological characters could be distinguished using an electron microscope. Cílem smluvního výzkumu byla odborná analýza biologických vzorků se záměrem popsat morfologické znaky pro druhovou klasifikaci. Součástí spolupráce byla provedena chemická příprava vzorků, následovalo pozorování těl samotných hlístic v různých pozicích tak, aby bylo možné rozlišit jednotlivé morfologické znaky pomocí elektronového mikroskopu. Keywords: nematodes; electron microscopy; morphological characterization Available at various institutes of the ASCR
SMV-2023-54: EM Nematodes II 2023

The aim of the contract research was the expert analysis of biological samples with the intention of describing morphological features for species classification. As part of the collaboration, ...

Hrubanová, Kamila
Ústav přístrojové techniky, 2023

SMV-2023-03: Holder for field-emission cathodes
Knápek, Alexandr; Horáček, Miroslav; Klein, Pavel
2023 - Czech
The contract research (CR) deals with the development of a modular holder for the development and testing of field-emission cathodes under ultra-high vacuum conditions. The research combines knowledge from vacuum engineering, power electronics and surface physics to achieve a reliable device that allows working with field-emission cathodes under vacuum conditions in diode and triode configurations. The main deliverables for the customer are drawings that allow the apparatus to be replicated and one piece of working prototype that has been constructed within the CR to verify the function. Smluvní výzkum (SMV) se zabývá vývojem modulárního držáku pro vývoj a testování auto-emisních katod v podmínkách ultra-vysokého vakua. Výzkum kombinuje znalosti z vakuové techniky, silnoproudé elektrotechniky a povrchové fyziky k dosažení spolehlivého zařízení, které umožňuje pracovat s polně-emisními katodami ve vakuových podmínkách, a to v diodové a triodové konfiguraci. Hlavním výstupem pro objednavatele je výkresová dokumentace, která umožňuje aparaturu replikovat a dále jeden kus funkčního prototypu, který byl v rámci SMV zkonstruován k ověření funkcionality. Keywords: field-emission cathode holder; relief structure; modular holder Available at various institutes of the ASCR
SMV-2023-03: Holder for field-emission cathodes

The contract research (CR) deals with the development of a modular holder for the development and testing of field-emission cathodes under ultra-high vacuum conditions. The research combines knowledge ...

Knápek, Alexandr; Horáček, Miroslav; Klein, Pavel
Ústav přístrojové techniky, 2023

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases