Number of found documents: 36
Published from to

Reconstruction of the Renaissance sand-coloured sgraffito based on the material copy
Válek, Jan; Skružná, Olga; Kozlovcev, Petr; Waisserová, J.; Wichterlová, Z.; Jiroušek, Josef
2019 - Czech
The aim of the method is to provide a methodical design for the preparation of sand made sgraffito mortar and show its use on a specific example. Cílem památkového postupu je poskytnout metodický návrh přípravy maltového doplňku pískového\nsgrafita a ukázat jeho využití na konkrétním příkladu. Keywords: renaissance sgraffito; repairs of plasters; traditional building technologies; traditional lime techniques Available in a digital repository NRGL
Reconstruction of the Renaissance sand-coloured sgraffito based on the material copy

The aim of the method is to provide a methodical design for the preparation of sand made sgraffito mortar and show its use on a specific example.

Válek, Jan; Skružná, Olga; Kozlovcev, Petr; Waisserová, J.; Wichterlová, Z.; Jiroušek, Josef
Ústav teoretické a aplikované mechaniky, 2019

Short-term rainfall for hydrological modeling and design of small water management structures in the landscape
Kavka, P.; Müller, Miloslav; Strouhal, L.; Kašpar, Marek; Bližňák, Vojtěch; Landa, M.; Weyskrabová, L.; Pavel, M.; Dostál, T.
2018 - Czech
The aim of this methodology is to reduce the current knowledge deficit in the field of short-term rainfall variability and its application in hydrological modeling and design of small water structures and conservation measures within the catchment. The methodology defines six generalized short-term rainfall scenarios with specific temporal distribution of rainfall intensity. Next their variability related to their occurence frequency and spatial distribution accross Czech Republic is presented. These scenarios were derived from the 10-years time series of radar rainfall measurements adjusted with the daily totals from ground gauging network. Cílem této metodiky je doplnění současného znalostního deficitu v oblasti variability krátkodobých dešťů a jejich využití pro potřeby hydrologického modelování, navrhování staveb na drobných vodních tocích a úprav v ploše povodí. Metodika definuje 6 typizovaných scénářů krátkodobých dešťů lišících se vnitřním rozdělením intenzit. Dále popisuje jejich variabilitu s ohledem na četnost jejich výskytu a prostorové rozložení na území ČR. Tyto scénáře byly odvozeny z desetileté řady radarových dat adjustovaných dle měření pozemních pozorovacích stanic. Doposud byla v oblasti krátkodobých návrhových dešťů využívána data z relativně starých zdrojů Trupl (1958), Šamaj (1985), Hrádek (1994). Tato metodika rozšiřuje a doplňuje výše zmíněné zdroje s cílem zpřesnit a zefektivnit hydrologické modelování a navazující navrhování staveb především v ploše povodí a na drobných vodních tocích. Podobná opatření jsou navrhována k ochraně půdního fondu a rozvoje hospodaření např. v rámci komplexních pozemkových úprav (KPÚ) nebo při návrhu protierozních opatření (PEO), protipovodňových opatření (PPO) nebo opatření sloužících k zadržení vody v krajině. Realizace těchto opatření je podporována řadou dotačních titulů (MZe, MŽP, AOPK, atp.) a lze tedy předpokládat široké uplatnění této metodiky v praxi. Keywords: Short-term precipitation; Rainfall patterns; Design rainfall; Hydrological modelling; Soil conservation; Land consolidation Fulltext is available at external website.
Short-term rainfall for hydrological modeling and design of small water management structures in the landscape

The aim of this methodology is to reduce the current knowledge deficit in the field of short-term rainfall variability and its application in hydrological modeling and design of small water structures ...

Kavka, P.; Müller, Miloslav; Strouhal, L.; Kašpar, Marek; Bližňák, Vojtěch; Landa, M.; Weyskrabová, L.; Pavel, M.; Dostál, T.
Ústav fyziky atmosféry, 2018

Methodology for breast ultrasound examination
Vydra, J.; Daneš, J.; Bartoš, Michal; Šroubek, Filip; Petr, L.; Zitová, Barbara
2017 - Czech
The aim of the proposed project is the development of a new ultrasonic equipment (US), allowing early detection of breast cancer and reduce the need to use the ionizing radiation during examinations. The aim is to eliminate the disadvantages of current ultrasonic systems in the diagnosis of breast cancer, which hinders its use. The target parameters include prospecting and automated description using parameters (size, texture), description of the situation, which is able to testify about the disease, combining individual images (registration) leading to the creation of 3D display - thus ensuring reproducibility UZ shaping and security testing the entire organ. At the same time the newly developed ultrasonic probe allows better capture the characteristics of bearings including microcalcifications. Software solution enables to follow the coverage of the breast examination. The areas which were omitted are detected and highlighted. Cílem projektu je vývoj nového ultrazvukového diagnostického zařízení (UZ), které umožní časný záchyt karcinomu prsu a sníží nutnost požívat ionizující záření při vyšetření. Cílem je odstranit nevýhody současných ultrazvukových diagnostických přístrojů v diagnostice rakoviny prsu, které brání v jeho využití. Mezi cílové parametry patří vyhledávání ložisek a jejich automatizovaný popis pomocí parametrů (rozměry, textura), tedy popis situace, který je schopen vypovídat o nemoci, skládání jednotlivých obrazů (registrace) vedoucí k vytvoření 3D zobrazení - a tím zaručit reprodukovatelnost UZ obrazení a jistotu vyšetření celého orgánu. Zároveň nově vyvinuté ultrazvukové sondy umožní lepší záchyt charakteristických ložisek včetně mikrokalcifikací. Softwarové řešení umožnuje sledovat pohyb sondy a vyhodnocovat kvalitu pokrytí vyšetřšní prsu. Keywords: breast ultrasound examination; breast cancer; computer guided diagnosis Fulltext is available at external website.
Methodology for breast ultrasound examination

The aim of the proposed project is the development of a new ultrasonic equipment (US), allowing early detection of breast cancer and reduce the need to use the ionizing radiation during examinations. ...

Vydra, J.; Daneš, J.; Bartoš, Michal; Šroubek, Filip; Petr, L.; Zitová, Barbara
Ústav teorie informace a automatizace, 2017

Repair of the parapet walk with battlements made from sandstone ashlar masonry with the regard to its visual authenticity and historic values – implemented sample procedure
Bláha, Jiří; Kovářová, K.; Buzek, Jaroslav; Panáček, M.; Cihla, M.; Rafl, T.; Hejný, L.; Rybařík, V.; Chamra, S.; Schröfel, J.
2016 - Czech
The multidisciplinary criteria for selecting, preparation and processing of a replacement stone for ashlar masonry were implemented in restoration and conservation of the Castle of Kost battlements – one of the most authentically survived medieval fortification monuments in the Czech Republic. Detailed description of undertaken surveys, preparation and interventions carried out within the repair process. Interdisciplinární kritéria pro výběr, přípravu a opracování náhradního kamene určeného pro opravy lícového zdiva byla použita při restaurování hradebního ochozu s cimbuřím na hradě Kosti, který patří k našim nejlépe zachovaným památkám středověkého fortifikačního stavitelství. Součástí je podrobný popis provedených průzkumů a analýz, přípravných prací a vlastního provedení opravy. Keywords: conservation and restoration; sandstone; ashlar masonry; stone dressing; castle battlements Available in a digital repository NRGL
Repair of the parapet walk with battlements made from sandstone ashlar masonry with the regard to its visual authenticity and historic values – implemented sample procedure

The multidisciplinary criteria for selecting, preparation and processing of a replacement stone for ashlar masonry were implemented in restoration and conservation of the Castle of Kost battlements – ...

Bláha, Jiří; Kovářová, K.; Buzek, Jaroslav; Panáček, M.; Cihla, M.; Rafl, T.; Hejný, L.; Rybařík, V.; Chamra, S.; Schröfel, J.
Ústav teoretické a aplikované mechaniky, 2016

Methodology for determining the relevant material characteristics of historical building materials for the restoration intervention
Slížková, Zuzana; Frankeová, Dita; Tišlová, R.
2016 - Czech
The aim of this metolodogy is to present a recommended list of material properties which have to be identified and evaluated within material survey of historical momuments.\n\n Cílem této metodiky je předložit doporučený seznam materiálových vlastností, které mají být zjištěny a hodnoceny v rámci materiálového průzkumu památkových objektů. Keywords: survey; restoration; conservation; material characteristics; cleaning; consolidation; repairing; hydrophobization Available in a digital repository NRGL
Methodology for determining the relevant material characteristics of historical building materials for the restoration intervention

The aim of this metolodogy is to present a recommended list of material properties which have to be identified and evaluated within material survey of historical momuments.\n\n

Slížková, Zuzana; Frankeová, Dita; Tišlová, R.
Ústav teoretické a aplikované mechaniky, 2016

The methodology for determining limits and intervals of important material characteristics, repair materials and technologies for compatible intervention
Tišlová, R.; Slížková, Zuzana; Novotná, Adéla; Frankeová, Dita; Kuneš, Petr; Ďoubal, J.
2016 - Czech
The aim of this metolodogy is to create summary of important material characteristics, define limits and intervals of selected material characterisctics and its verification.\n Cílem metodiky je vytvořit přehled významných materiálových charakteristik, stanovit meze a intervaly vybraných materiálových charakteristik a jejich ověření. Keywords: material characteristics; repair materials; evaluation of the effect of the consolidation agent; restoration Available in a digital repository NRGL
The methodology for determining limits and intervals of important material characteristics, repair materials and technologies for compatible intervention

The aim of this metolodogy is to create summary of important material characteristics, define limits and intervals of selected material characterisctics and its verification.\n

Tišlová, R.; Slížková, Zuzana; Novotná, Adéla; Frankeová, Dita; Kuneš, Petr; Ďoubal, J.
Ústav teoretické a aplikované mechaniky, 2016

The methodology for the selection of appropriate restoration work
Machačko, Luboš; Gláser, Petr; Bartoš, L.; Bayer, K.; Ďoubal, J.; Justa, P.; Vojtěchovský, J.; Krhánková, K.; Vácha, Z.; Wichterlová, Z.
2016 - Czech
The aim of this methodology is to present a recommended procedure which leads to selection of optimal restoration intervention. Selection of the appropriate procedure and method of restoration and reconstruction is the primary prerequisite for the quality and efficiency of future work. Cílem této metodiky je předložit doporučený postup, na základě kterého lze provést optimální restaurátorský zásah. Výběr vhodného postupu a způsobu restaurování a obnovy je primárním předpokladem pro kvalitu a efektivnost odvedených prací. Keywords: investigation; restoration; conservation; compatibility; conservation programme (task); conservation report Available in a digital repository NRGL
The methodology for the selection of appropriate restoration work

The aim of this methodology is to present a recommended procedure which leads to selection of optimal restoration intervention. Selection of the appropriate procedure and method of restoration and ...

Machačko, Luboš; Gláser, Petr; Bartoš, L.; Bayer, K.; Ďoubal, J.; Justa, P.; Vojtěchovský, J.; Krhánková, K.; Vácha, Z.; Wichterlová, Z.
Ústav teoretické a aplikované mechaniky, 2016

Survey of the facial sandstone masonry of the stone coat of historic structures with the use of non-invasive analytical techniques of ground-penetrating radar
Havlín, J.; Slavíková, M.; Gláser, Petr; Válek, Jan; Pavelka, K.; Panošová Hucková, M.
2016 - Czech
This conservation procedure includes a description of basic steps, which must be followed to use the ground-penetrating radar and to gain useful data for composition visualization of facial sandstone masonry used in historic structures. Suitable settings of the GPR device are introduced for collecting data and the way of their processing with the aid of software. The conservation procedure applies a non-invasive analytical technique of GPR when surveying stone structures and therefore it can be a useful specifying tool of particular details during the execution phase of the construction-historical survey Tento památkový postup obsahuje popis základních kroků, které je třeba dodržet pro úspěšné použití georadaru a získání užitečných dat při vizualizaci skladby lícního pískovcového zdiva historických konstrukcí. Jsou zde uvedena vhodná nastavení přístroje GPR při sběru dat a jejich způsob zpracování pomocí softwaru. Památkový postup aplikuje nedestruktivní analytickou techniku GPR při průzkumu kamenných konstrukcí a může proto být užitečným upřesněním specifických podrobností při provádění stavebně historického průzkumu. Keywords: ground-penetrating radar; non-invasive; masonry; sandstone; survey Available in a digital repository NRGL
Survey of the facial sandstone masonry of the stone coat of historic structures with the use of non-invasive analytical techniques of ground-penetrating radar

This conservation procedure includes a description of basic steps, which must be followed to use the ground-penetrating radar and to gain useful data for composition visualization of facial sandstone ...

Havlín, J.; Slavíková, M.; Gláser, Petr; Válek, Jan; Pavelka, K.; Panošová Hucková, M.
Ústav teoretické a aplikované mechaniky, 2016

The use of carpentry joints for the repair of historical structures
Kloiber, Michal; Kunecký, Jiří; Hasníková, Hana; Sebera, V.; Tippner, J.; Fajman, P.; Růžička, P.; Stejskal, D.
2016 - Czech
The conservation process describes the way of using prosthesis lap scarf carpentry joints for reconstruction of historical timber structures. This new scarf joint makes use of the strutting effect of inclined contact faces where the forces are transmitted through wooden coupling elements - wooden dowels or keys. The process consists of several chapters describing the diagnostics of original wood and the repaired structure, the design of the joint and execution of the joint. It also includes examples of succesful reconstruction made with according to this conservation process. Památkový postup popisuje způsob využití protézovacího plátového celodřevěného spoje při rekonstrukcích historických dřevěných konstrukcí. Tento nový plátový spoj využívá rozpíravého efektu šikmých čel a síly v něm jsou přenášeny pomocí dřevěných spojovacích prostředků - dřevěných kolíků či dřevěných hmoždíků. Postup se skládá z několika kapitol popisujících diagnostiku původního materiálu a opravované konstrukce, návrh spoje a jeho provádění. Obsahuje také příklady úspěšných rekonstrukcí, které byly provedeny s jeho využitím. Keywords: carpentry joints; scarf joint; replacement; joint execution; diagnostics Available in a digital repository NRGL
The use of carpentry joints for the repair of historical structures

The conservation process describes the way of using prosthesis lap scarf carpentry joints for reconstruction of historical timber structures. This new scarf joint makes use of the strutting effect of ...

Kloiber, Michal; Kunecký, Jiří; Hasníková, Hana; Sebera, V.; Tippner, J.; Fajman, P.; Růžička, P.; Stejskal, D.
Ústav teoretické a aplikované mechaniky, 2016

Lapped scarf joints for reconstruction of historical structures
Kunecký, Jiří; Fajman, P.; Hasníková, Hana; Kuklík, P.; Kloiber, Michal; Sebera, V.; Tippner, J.
2016 - English
This paper presents a description of the repair of timber structures using a prosthesis scarf\njoint designed for the replacement of damaged parts of beams. This new scarf joint makes use\nof the strutting effect of inclined contact faces where the forces are transmitted through\nwooden coupling elements - wooden dowels or keys. The scarf can be modified in four\nvariants according to the relevant stress and is suitable for historically valuable timber\nstructures. It meets both functional and aesthetic requirements. The designer - structural\nengineer will learn in the methods the load bearing capacity or stiffness of the beam with the\ndesigned joint, its recommended dimensions and detailed geometry. The contractor will\nappreciate the description of the execution and maintenance of the joint. Keywords: carpentry joints; scarf joint; replacement; load bearing capacity; stiffness; joint execution Fulltext is available at external website.
Lapped scarf joints for reconstruction of historical structures

This paper presents a description of the repair of timber structures using a prosthesis scarf\njoint designed for the replacement of damaged parts of beams. This new scarf joint makes use\nof the ...

Kunecký, Jiří; Fajman, P.; Hasníková, Hana; Kuklík, P.; Kloiber, Michal; Sebera, V.; Tippner, J.
Ústav teoretické a aplikované mechaniky, 2016

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases