Number of found documents: 1138
Published from to

D4.3 Kinetic rate expressions on 3D printed catalysts
Stavárek, Petr; Grande, C.; Dubois, J.-L.
2018 - Czech
Report focuses on kinetic rate expression determination on basis of data obtained with 3D printed catalyst. Zpráva popisuje rychlostní rovnice chemických reakcí odvozených z experimentálních dat získaných na katalyzátoru vytištěným 3D tiskem. Keywords: kinetic rate; catalyst; basic data Available at various institutes of the ASCR
D4.3 Kinetic rate expressions on 3D printed catalysts

Report focuses on kinetic rate expression determination on basis of data obtained with 3D printed catalyst.

Stavárek, Petr; Grande, C.; Dubois, J.-L.
Ústav chemických procesů, 2018

The processing of thin-walled Aluminum Waste
Sobek, Jiří; Veselý, Václav; Šyc, Michal
2018 - Czech
The research report deals with the processing of thin-walled aluminium waste. Výzkumná zpráva pojednává o problematice zpracování tenkostěnného hliníkového odpadu. Keywords: aluminum waste; processing Available at various institutes of the ASCR
The processing of thin-walled Aluminum Waste

The research report deals with the processing of thin-walled aluminium waste.

Sobek, Jiří; Veselý, Václav; Šyc, Michal
Ústav chemických procesů, 2018

Reaction of Co, Ni, Mo, and W Compounds for Preparation of Sulfide Catalysts.
Moravčík, Jan
2018 - Czech
Keywords: sulfide catalysts; hydrodesulfurization; thiophene Available at various institutes of the ASCR
Reaction of Co, Ni, Mo, and W Compounds for Preparation of Sulfide Catalysts.

Moravčík, Jan
Ústav chemických procesů, 2018

Kinetic Study of a Gas Absorption Into a Liquid Stages 1.1 and 1.2
Stavárek, Petr
2018 - English
Report describes the experimental apparatus and measurements of the kinetics of a gas absorption into a liquid and reports the evaluated results. Keywords: experimental apparatus; measurements; gas absorption Available at various institutes of the ASCR
Kinetic Study of a Gas Absorption Into a Liquid Stages 1.1 and 1.2

Report describes the experimental apparatus and measurements of the kinetics of a gas absorption into a liquid and reports the evaluated results.

Stavárek, Petr
Ústav chemických procesů, 2018

Ebulliometric and Static Measurement of Total Pressure in the in the Binary Water + Poly(Ethylene Glycol) System.
Pavlíček, Jan; Bogdanić, Grozdana; Wichterle, Ivan; Izák, Pavel
2018 - English
The total pressure of the systems containing water and three different poly(ethylene glycol)s with nominal molecular weights of 1000, 3000 and 6000 g mol-1 was measured isothermally at 303.15, 308.15, 313.15, 323.15, 333.15, 343.15, 353.15 and 363.15, using the improved static apparatus for lower temperatures and ebulliometrically for higher temperatures, covering the concentration range up to 50 wt % of the polymer. The 343.15 K isotherm was measured by both experimental methods, and both showed good continuity and performance. A lot of additional data have been measured but not yet published, which are integrated here together with our recent measurement. Keywords: vapou-liquid equilibrium; polymer system Available at various institutes of the ASCR
Ebulliometric and Static Measurement of Total Pressure in the in the Binary Water + Poly(Ethylene Glycol) System.

The total pressure of the systems containing water and three different poly(ethylene glycol)s with nominal molecular weights of 1000, 3000 and 6000 g mol-1 was measured isothermally at 303.15, 308.15, ...

Pavlíček, Jan; Bogdanić, Grozdana; Wichterle, Ivan; Izák, Pavel
Ústav chemických procesů, 2018

Supported Ionic Liquid Membranes for Selective Separation of Volatile Organic Vapour and Pollutants from Gas Stream.
Petrusová, Zuzana
2018 - English
Keywords: ionic liquid membranes; volatile organic vapour; pollutant Available at various institutes of the ASCR
Supported Ionic Liquid Membranes for Selective Separation of Volatile Organic Vapour and Pollutants from Gas Stream.

Petrusová, Zuzana
Ústav chemických procesů, 2018

Powder Rheology - Measuring of Properties of Pharmaceutical Particulate Materials.
Kulaviak, Lukáš
2018 - English
Keywords: rheology; pharmaceutical materials Available at various institutes of the ASCR
Powder Rheology - Measuring of Properties of Pharmaceutical Particulate Materials.

Kulaviak, Lukáš
Ústav chemických procesů, 2018

Microreactor as Efficient Tool for Photooxidation Reactions.
Hejda, Stanislav; Klusoň, Petr
2017 - English
Keywords: photoreactor; dagradation; photocatalysís Available at various institutes of the ASCR
Microreactor as Efficient Tool for Photooxidation Reactions.

Hejda, Stanislav; Klusoň, Petr
Ústav chemických procesů, 2017

Experimental Plan for the Project: Electrocoagulation Unit for Microalgal Biomass Separation.
Brányiková, Irena; Vojtěchovský, R.; Čermáková, Lenka
2017 - Czech
Electrofloculation (electrocoagulation) of microalgae is a highly complex process involving a number of very complex transport, electrochemical, hydrodynamic and surface phenomena. The description of this process at the level of single mechanisms involved is too complicated and experimentally demanding, fortunately it is not absolutely necessary for the practical application. The electrofloculation was therefore approached by an engineering method that identified the criteria (range) of the desired variables and the main factors that affect them. For these factors, partial factorial experimental plans were designed. Elektroflokulace (elektrokoagulace) jednobuněčných řas vysoce komplexní děj zahrnující řadu velmi složitých transportních, elektrochemických, hydrodynamických a povrchových jevů. Popis toho děje na úrovni jednotlivých zahrnutých mechanismů je příliš složitý a experimentálně náročný a pro účely praktického využití tohoto jevu není zcela nezbytný. K elektroflokulaci bylo proto přestoupeno inženýrským způsobem, kdy byla identifikována kritéria (rozmezí) žádaných veličin a hlavní faktory, které je ovlivňují. Pro tyto faktory byly pak vytvořeny dílčí faktoriální plány experimentů. Keywords: electrocoagulation; electrofloculation; microalgae Available at various institutes of the ASCR
Experimental Plan for the Project: Electrocoagulation Unit for Microalgal Biomass Separation.

Electrofloculation (electrocoagulation) of microalgae is a highly complex process involving a number of very complex transport, electrochemical, hydrodynamic and surface phenomena. The description of ...

Brányiková, Irena; Vojtěchovský, R.; Čermáková, Lenka
Ústav chemických procesů, 2017

Optimization of Sewage Sludge Combustion Conditions.
Pohořelý, Michael; Moško, Jaroslav; Šyc, Michal; Svoboda, Karel; Zach, Boleslav; Punčochář, Miroslav
2017 - Czech
The optimum operating conditions for fluidized bed combustion of dry stabilized sewage sludge are evaluated and described in the report. Ve zprávě byly zhodnoceny a popsány ideální provozní podmínky pro fluidní spalování suchých stabilizovaných čistírenských kalů. Keywords: sewage sludge; fluidized bed; combustion Available at various institutes of the ASCR
Optimization of Sewage Sludge Combustion Conditions.

The optimum operating conditions for fluidized bed combustion of dry stabilized sewage sludge are evaluated and described in the report.

Pohořelý, Michael; Moško, Jaroslav; Šyc, Michal; Svoboda, Karel; Zach, Boleslav; Punčochář, Miroslav
Ústav chemických procesů, 2017

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases