Burning-out process of organic materials from green ceramic body
Stoklasa, Jaroslav
2005 - Czech Burning-out processes inside of ceramic body between very small quantity of burning-out substance and vast one are compared. Black cores formation is discused. Porovnány průběhy procesu vyhořívání v keramickém střepu s velmi malým a velkým množstvím vyhořívajících látek. Diskutována tvorba černých jader. Keywords: burning-out; advanced ceramics; physical chemistry process Available at various institutes of the ASCR Burning-out process of organic materials from green ceramic body

Burning-out processes inside of ceramic body between very small quantity of burning-out substance and vast one are compared. Black cores formation is discused.

Stoklasa, Jaroslav
Ústav struktury a mechaniky hornin, 2005

Effects of geological structure in evolution of slope movements near the town of Ml. Boleslav
Rybář, Jan
2005 - Czech Significance of geological conditions in the evolution of slope failures is analyzed in sedimentary rocks of Cretaceous Basin near the town of Mladá Boleslav. Byl analyzován vliv geologic. stavby na vývoj porušení svahů v křídových sedimentech na Mladoboleslavsku. Keywords: slide; lateral spread; fall Available at various institutes of the ASCR Effects of geological structure in evolution of slope movements near the town of Ml. Boleslav

Significance of geological conditions in the evolution of slope failures is analyzed in sedimentary rocks of Cretaceous Basin near the town of Mladá Boleslav.

Rybář, Jan
Ústav struktury a mechaniky hornin, 2005

Optimalisation of continual process of composite production by method dielectrical analysis
Inneman, A.; Sucharda, Zbyněk; Burian, M.; Pavlica, R.
2005 - Czech Investigation of cure process of resin at continual production of glass reinforced composites by dielectrical analysis. Sledování průběhu vytvrzování matrice při kontinuální výrobě kompozitů se skelnou výztuží pomocí dielektrické analýzy. Keywords: composites; cure process; dielectrical analysis Available at various institutes of the ASCR Optimalisation of continual process of composite production by method dielectrical analysis

Investigation of cure process of resin at continual production of glass reinforced composites by dielectrical analysis.

Inneman, A.; Sucharda, Zbyněk; Burian, M.; Pavlica, R.
Ústav struktury a mechaniky hornin, 2005

Optimalisation of pultrusion process of composites by method dielectrical analysis
Pavlica, R.; Inneman, A.; Sucharda, Zbyněk; Burian, M.
2005 - Czech Investigation of cure process of polyester composites at pultrusion by method dielectrical analysis. Sledování průběhu vytvrzování při pultruzi polyesterových skelných kompozitů metodou dielektrické analýzy. Keywords: unsaturated polyester resin; glass roving; pultrusion Available at various institutes of the ASCR Optimalisation of pultrusion process of composites by method dielectrical analysis

Investigation of cure process of polyester composites at pultrusion by method dielectrical analysis.

Pavlica, R.; Inneman, A.; Sucharda, Zbyněk; Burian, M.
Ústav struktury a mechaniky hornin, 2005

Selected analysis of morphostructure of NE part of the Rychlebské hory Mts
Štěpančíková, Petra
2005 - Czech The contribution deals wit analysis of joint and fault systems as well as morpholineaments within the NE part of the Rychlebské hory Mts. and the Žulovská Hilly Land. Příspěvek se zabývá analýzou puklinových a zlomových systémů a morfolineamentů v sv. části Rychlebských hor a Žulovské pahorkatiny. Keywords: morphotectonics; joint analysis; fault analysis Available at various institutes of the ASCR Selected analysis of morphostructure of NE part of the Rychlebské hory Mts

The contribution deals wit analysis of joint and fault systems as well as morpholineaments within the NE part of the Rychlebské hory Mts. and the Žulovská Hilly Land.

Štěpančíková, Petra
Ústav struktury a mechaniky hornin, 2005

Cobalt containing siliconoxycarbide glasses
Kolář, František; Machovič, V.; Svítilová, Jaroslava; Langrová, Anna
2005 - Czech Cobalt containing glasses prepared via curing and pyrolysis of polymethyl(phenyl)siloxane resin Lukosil 901 and Co phtalate. Cobalt atoms in the SiOC phase increas polymerization degree of the material. Silikonoxykarbidová skla obsahující kobalt byla připravena vytvrzováním a pyrolýzou polymethyl(phenyl)siloxanové pryskyřice Lukosil 901 ve směsi s Co ftalátem. Kobalt v SiOC fázi zvyšuje polymerizační stupeň skelné fáze. Keywords: siliconoxycarbide glasses Available at various institutes of the ASCR Cobalt containing siliconoxycarbide glasses

Cobalt containing glasses prepared via curing and pyrolysis of polymethyl(phenyl)siloxane resin Lukosil 901 and Co phtalate. Cobalt atoms in the SiOC phase increas polymerization degree of the ...

Kolář, František; Machovič, V.; Svítilová, Jaroslava; Langrová, Anna
Ústav struktury a mechaniky hornin, 2005

Permanent GPS observatories operated by the Institute of Rock Structure and Mechanics, Academy of Sciences of the Czech Republic
Schenk, Vladimír; Kottnauer, Pavel; Schenková, Zdeňka
2004 - Czech Keywords: GPS permanent observatories; the Bohemian Massif; hvězdárny; GPS Available at various institutes of the ASCR Permanent GPS observatories operated by the Institute of Rock Structure and Mechanics, Academy of Sciences of the Czech Republic

Schenk, Vladimír; Kottnauer, Pavel; Schenková, Zdeňka
Ústav struktury a mechaniky hornin, 2004

Possibility of total fracturing forecasting of loaded rock samples on the base of ultrasonic emission analysis
Rudajev, Vladimír; Lokajíček, Tomáš; Vilhelm, Jan
2004 - Czech The ultrasonic emission, generated by rock samples loading, was subjected to autocorrelation analysis. The increase of autocorrelation coefficients and the tendency to their linear decrease is evidence of redistribution of stress in the sample, which occurs after stronger ultrasonic events. The above-mentioned parameters have a precursory character. Ultrazvuková emise vyvolaná zatěžováním horninových vzorků byla podrobena korelační analýze. Vzrůst hodnot autokorelačních koeficientů a jejich tendence k lineárnímu poklesu prokazují redistribuci napětí ve vzorku, ke kterému dochází po vzniku silnějšího ultrazvukového děje. Keywords: ultrasonic emission; correlation analysis; stress; korelační analýza; fonetika Available at various institutes of the ASCR Possibility of total fracturing forecasting of loaded rock samples on the base of ultrasonic emission analysis

The ultrasonic emission, generated by rock samples loading, was subjected to autocorrelation analysis. The increase of autocorrelation coefficients and the tendency to their linear decrease is ...

Rudajev, Vladimír; Lokajíček, Tomáš; Vilhelm, Jan
Ústav struktury a mechaniky hornin, 2004

Landslide susceptibility model for protected area White Carpathians
Pechanec, V.; Klimeš, Jan
2004 - Czech Article describes in detail preparation and results of susceptibility zonation for the Bílé Karpaty protected area. Usage of susceptibility map for management purposes is also discused. Příspěvek se zabývá vytvořením mapy náchylnosti území k sesouvání pro CHKO Bílé Karpaty a využitím této mapy pro management chráněného území. Keywords: inventory maps; modelling of slope movements; GIS Available at various institutes of the ASCR Landslide susceptibility model for protected area White Carpathians

Article describes in detail preparation and results of susceptibility zonation for the Bílé Karpaty protected area. Usage of susceptibility map for management purposes is also discused.

Pechanec, V.; Klimeš, Jan
Ústav struktury a mechaniky hornin, 2004

Using the coupled modelling method to study stability of slopes
Trčková, Jiřina; Procházka, P.
2004 - Czech Stress changes under the slope abutment caused due to the external louding along slope ridge and deformation owing to waterlogging of slope abument was studied. Obtained results were used to formulate constitutive laws for numerical modelling. Na fyzikálních modelech byly studovány napěťové změny pod patou svahu vznikající následkem zatěžování koruny svahu a deformace v důsledku podmáčení svahu. Získané výsledky byly užity k formulaci konstitučních vztahů pro numerické modelování. Keywords: experimental models; stability of slopes; coupled modelling Available at various institutes of the ASCR Using the coupled modelling method to study stability of slopes

Stress changes under the slope abutment caused due to the external louding along slope ridge and deformation owing to waterlogging of slope abument was studied. Obtained results were used to formulate ...

Trčková, Jiřina; Procházka, P.
Ústav struktury a mechaniky hornin, 2004