Number of found documents: 244
Published from to

New material
Hanzlíček, Tomáš; Perná, Ivana
2009 - Czech
The paper presents basic information about poly condensation reaction of clay minerals and introduces the possibilities of utilization in glass industry. Práce představuje základní informace o poly-kondenzačních procesech jílových minerálů a seznamuje s možnostmi použití ve sklářském průmyslu. Keywords: geopolymer; new material; utilization Available at various institutes of the ASCR
New material

The paper presents basic information about poly condensation reaction of clay minerals and introduces the possibilities of utilization in glass industry.

Hanzlíček, Tomáš; Perná, Ivana
Ústav struktury a mechaniky hornin, 2009

Geopolymer reactions of the metakaolinite to preparation zeolite A
Hájek, Pavel; Koloušek, D.; Andertová, J.
2008 - Czech
Geopolymer reactions have much in common with diagenetic transformations of the sedimentary rocks. Inside of laboratory conditions occur of geopolymer masses in alkali reaction of metakaolinite to sodium aluminate (Fastex 81). As a result reaction is rise the zeolite phase (zeolite A) inside of relevant substance. Results reaction were confirmed by means of X – ray diffractometry and SEM. Geopolymerní reakce mají mnoho společného s diagenetickými přeměnami sedimentárních hornin. V laboratorních podmínkách vznikají geopolymerní hmoty při alkalické reakci metakaolinitu a hlinitanu sodného (Fastex 81). Jako výsledek reakce je objevení zeolitové fáze (zeolit A) v dané hmotě. Výsledky reakce byli potvrzeny pomocí XRD a SEM. Keywords: geopolymer reactions; alkali reaction Available at various institutes of the ASCR
Geopolymer reactions of the metakaolinite to preparation zeolite A

Geopolymer reactions have much in common with diagenetic transformations of the sedimentary rocks. Inside of laboratory conditions occur of geopolymer masses in alkali reaction of metakaolinite to ...

Hájek, Pavel; Koloušek, D.; Andertová, J.
Ústav struktury a mechaniky hornin, 2008

Composite material based on aramid fibers and polysiloxane matrix modified by ydroxapatite nanoparticles
Sochor, M.; Balík, Karel; Suchý, Tomáš; Sucharda, Zbyněk; Černý, Martin
2008 - English
Tato studie si klade za cíl ověření vlivu nanočásticového hydroxyaptitu, jako bioaktivní příměsi matrice, na mechanické vlastnosti (jmenovitě pevnost v ohybu a ohybový modul pružnosti) kompozitního materiálu perspektivně použitelného v kostní chirurgii. This study is aimed at verification of influence of hydroxyapatite nanoparticles additives, commonly used to improve the bioactivity of implants, on mechanical properties (namely ultimate strength in bending and modulus of elasticity in bending) of composite material potentially applicable in the bone surgery. Keywords: composite material; hydroxyapatite; mechanical behavior Available at various institutes of the ASCR
Composite material based on aramid fibers and polysiloxane matrix modified by ydroxapatite nanoparticles

Tato studie si klade za cíl ověření vlivu nanočásticového hydroxyaptitu, jako bioaktivní příměsi matrice, na mechanické vlastnosti (jmenovitě pevnost v ohybu a ohybový modul pružnosti) kompozitního ...

Sochor, M.; Balík, Karel; Suchý, Tomáš; Sucharda, Zbyněk; Černý, Martin
Ústav struktury a mechaniky hornin, 2008

Continuous pyrolysis of carbonaceous materials with model gasification of the solid product
Kříž, Vlastimil; Káš, Václav; Brožová, Zuzana
2008 - English
Vzorky samotného hnědého uhlí z dolu Jiří a jeho směsi (30%) s pneu-pryží, Forsanem (ABS), a celulózou byly pyrolyzovány v rotační peci při teplotě 900°C. Tuhý produkt byl zplyňován vodní parou a oxidem uhličitým. Samples of lignite from Jiří Mine alone and its mixtures (30%) with waste tire-rubber, Forsan (ABS) and cellulose were pyrolyzed on a rotary kiln at a temperature of 900°C. The solid product was gasified by steam and carbon dioxide. Keywords: rotary kiln; pyrolysis; coal Available at various institutes of the ASCR
Continuous pyrolysis of carbonaceous materials with model gasification of the solid product

Vzorky samotného hnědého uhlí z dolu Jiří a jeho směsi (30%) s pneu-pryží, Forsanem (ABS), a celulózou byly pyrolyzovány v rotační peci při teplotě 900°C. Tuhý produkt byl zplyňován vodní parou a ...

Kříž, Vlastimil; Káš, Václav; Brožová, Zuzana
Ústav struktury a mechaniky hornin, 2008

Monitoring of seismic impact on historical buildings and thier damage during building the tunnel Blanka – especially influence on the stability of historical buildings in the Prague Castle area
Brož, Milan; Štrunc, Jaroslav; Svatoš, J.
2008 - Czech
The persistence of unique historical buildings is restricted due to weathering of construction material enhanced by meteorological processes such as storms, driving rain and temperature variations beneath the freezing point. Dynamic forces endangering the mechanical stability of exposed elements of building structures could be caused by impacts of seismic waves. Životnost staveb unikátní kulturně historické hodnoty je snižována zejména jejich dynamickou únavou, která může být nepříznivě ovlivněna výstavbou inženýrských staveb v jejím okolí. Postupující oslabování tuhosti a zmenšování odolnosti jednotlivých extrémně namáhaných stavebních prvků se vyšetřuje metodami monitorování jejich seismické odezvy. Keywords: static; geotechnic; monitoring Available at various institutes of the ASCR
Monitoring of seismic impact on historical buildings and thier damage during building the tunnel Blanka – especially influence on the stability of historical buildings in the Prague Castle area

The persistence of unique historical buildings is restricted due to weathering of construction material enhanced by meteorological processes such as storms, driving rain and temperature variations ...

Brož, Milan; Štrunc, Jaroslav; Svatoš, J.
Ústav struktury a mechaniky hornin, 2008

Uppermost crust S-wave velocities from surface waves generated by M4.1 earthquake in Lubin, Poland
Řezba, Karel; Kolínský, Petr
2008 - English
Studujeme Rayleighovy vlny generované zemětřesením v Lubinu. Za použití programu SVAL je vypočten model rychlostí S vln. Rayleigh waves generated by rockburst in Lubin is studied. S-wave velocity model is estimated, using program SVAL. Keywords: rayleigh wave; group velocity dispersion curves; rockburst Available at various institutes of the ASCR
Uppermost crust S-wave velocities from surface waves generated by M4.1 earthquake in Lubin, Poland

Studujeme Rayleighovy vlny generované zemětřesením v Lubinu. Za použití programu SVAL je vypočten model rychlostí S vln.

Řezba, Karel; Kolínský, Petr
Ústav struktury a mechaniky hornin, 2008

Collision movements detected in Sudeten Marginal Fault zone, Bohemian Massif
Stemberk, Josef; Košťák, Blahoslav; Cacoń, S.
2008 - English
Results of monitoring of active fault movements are discussed. Keywords: active tectonics; fault displacements; monitoring Available at various institutes of the ASCR
Collision movements detected in Sudeten Marginal Fault zone, Bohemian Massif

Results of monitoring of active fault movements are discussed.

Stemberk, Josef; Košťák, Blahoslav; Cacoń, S.
Ústav struktury a mechaniky hornin, 2008

Mechanical behaviour of aramid fibers/polysiloxane matrix composites modified by bioactive nano/micro particles
Sochor, M.; Balík, Karel; Suchý, Tomáš; Sucharda, Zbyněk; Černý, Martin
2008 - English
Tento příspěvek pojednává o ověření vlivu nano/mikro aditiv hydroxyapatitu a fosforečnanu vápenatého, které jsou běžně používané ke zlepšení bioaktivity implantátů, na mechanické vlastnosti kompozitních materiálů tvořených Aramidovými vlákny a polysiloxanovou matricí, a jsou potenciálně využitelné v kostní chirurgii. This study is aimed at verification of influence of hydroxyapatite/tri-calcium phosphate nano/micro particles additives, commonly used to improve the bioactivity of implants, on mechanical properties of composite material consisting of polyamide fabrics embedded in poly (dimethyl siloxane) matrix potentially applicable in the bone surgery. Keywords: calcium apatites; composite material; nano particles Available at various institutes of the ASCR
Mechanical behaviour of aramid fibers/polysiloxane matrix composites modified by bioactive nano/micro particles

Tento příspěvek pojednává o ověření vlivu nano/mikro aditiv hydroxyapatitu a fosforečnanu vápenatého, které jsou běžně používané ke zlepšení bioaktivity implantátů, na mechanické vlastnosti ...

Sochor, M.; Balík, Karel; Suchý, Tomáš; Sucharda, Zbyněk; Černý, Martin
Ústav struktury a mechaniky hornin, 2008

Geopolymer composites and restoration of baroque terracotta statue
Hanzlíček, Tomáš; Steinerová, Michaela; Straka, Pavel; Perná, Ivana
2007 - English
Je popsána a diskutována metoda restaurování barokní terakotové sochy pomocí geopolymerních složených materiálů. Restoration of baroque terracotta statue by means of geopolymer composites is described and discussed. Keywords: alkali activated materials; geopolymers Available at various institutes of the ASCR
Geopolymer composites and restoration of baroque terracotta statue

Je popsána a diskutována metoda restaurování barokní terakotové sochy pomocí geopolymerních složených materiálů.

Hanzlíček, Tomáš; Steinerová, Michaela; Straka, Pavel; Perná, Ivana
Ústav struktury a mechaniky hornin, 2007

Structural characterization of PET fiber-reinforced cement-based composite
Machovič, Vladimír; Kopecký, L.; Němeček, J.; Kolář, František; Svítilová, Jaroslava; Andertová, J.
2007 - Czech
The Raman microspectroscopy mapping technique, nanoindentation and environmental scanning electron microscopy (ESEM) in combination with microanalysis (EDX), and electron diffraction (EBSD-OIM)were successfully used to study of the interfacial transition zone (ITZ) around polyethylene terephtalate (PET) reinforcement in concrete. Kontaktní zóna mezi PET mikrovýztuží a cementovou matricí představuje kritické místo rozhodující o výsledné pevnosti kompozitu. Mikrostruktura, chemické a mineralogické složení bylo stanoveno Ramanovy mikrospektroskopie, metody nanoindentace, elektronové mikroskopie a mikroanalýzy. ca 25 µm. Keywords: PET; cement; composite Available at various institutes of the ASCR
Structural characterization of PET fiber-reinforced cement-based composite

The Raman microspectroscopy mapping technique, nanoindentation and environmental scanning electron microscopy (ESEM) in combination with microanalysis (EDX), and electron diffraction (EBSD-OIM)were ...

Machovič, Vladimír; Kopecký, L.; Němeček, J.; Kolář, František; Svítilová, Jaroslava; Andertová, J.
Ústav struktury a mechaniky hornin, 2007

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases