Number of found documents: 153
Published from to

Application of thermal analysis in study of crystalline materials and glasses
Nitsch, Karel
2010 - Czech
Paper presents an outline of thermal analysis methods (differential thermal analysis (DTA), differential scanning calorimetry (DSC), thermogravimetry (TG), thermomechnical analysis (TMA)), their historical development, characterization and application in study of crystalline materials and glasses. Práce uvádí přehled metod termické analýzy (diferenční termická analýza (DTA), diferenční kompenzační kalorimetrie (DSC), termogravimetrie (TG), termomechanická analýza (TMA)), jejich historický vývoj, stručnou charakteristiku a použití při studiu termických vlastností krystalických látek a skel. Keywords: thermal analysis; differential thermal analysis (DTA); differential scanning calorimetry (DSC); thermogravimetry (TG); thermomechnical analysis (TMA) Available at various institutes of the ASCR
Application of thermal analysis in study of crystalline materials and glasses

Paper presents an outline of thermal analysis methods (differential thermal analysis (DTA), differential scanning calorimetry (DSC), thermogravimetry (TG), thermomechnical analysis (TMA)), their ...

Nitsch, Karel
Fyzikální ústav, 2010

Study of biocompatible layers TiO.sub.2./sub./Si using FTIR spectroscopy
Zezulová, M.; Remsa, Jan; Jelínek, M.
2010 - Czech
There has been a great interest in research regarding titanium dioxide, especially in form of thin layers. One of the methods used to characterize this material is Fourier Transform Infrared Spectroscopy (FTIR). In this paper we report FTIR measurement results of TiO2 layers prepared by Pulsed Laser Deposition method. The layers were created on silicon (111) substrates (1x1 cm). FTIR spectrometer is based on absorption of infrared radiation and the interference process is implemented instead of classical dispersion method. This kind of spectrometer requires mathematical method of Fourier transform to gain classical spectral image. To see composition and crystalline structure the spectral region is frequently set to 600-100 cm-1. Around 50 samples were measured. Most samples were measured from different angles of incidence and with different setup (accessory). We were able to confirm different crystalline structure (anatase,rutile, and brookite) V oblasti výzkumu je velký zájem o studium oxidu titaničitého, a to zejména ve formě tenkých vrstev. Jednou z metod používaných k charakterizaci tohoto materiálu je Fourierova transformace infračervené spektroskopie (FTIR). V práci budou prezentovány výsledky měření pomocí FTIR spektrometru v daleké infračervené oblasti (600-100cm-1) krystalických i amorfních fází TiO2 vrstev, připravených metodou pulzní laserové depozice. Vrstvy byly vytvořeny na substrátu (1x1 cm) křemíku (111). FTIR spektrometr je založen na absorpci infračerveného záření a využívá jeho interference namísto klasického rozkladu světla disperzním prvkem. Tento spektrometr vyžaduje Fourierovu transformaci k získání klasického spektrálního obrazu. Jsme schopni pozorovat píky anatasu (488 cm-1), rutilu (513cm-1) a brookitu (566 cm-1). Keywords: PLD; FTIR; TiO.sub.2./sub. Available at various institutes of the ASCR
Study of biocompatible layers TiO.sub.2./sub./Si using FTIR spectroscopy

There has been a great interest in research regarding titanium dioxide, especially in form of thin layers. One of the methods used to characterize this material is Fourier Transform Infrared ...

Zezulová, M.; Remsa, Jan; Jelínek, M.
Fyzikální ústav, 2010

Diffusion length of excitons in thermally transformed polyphenols
Toušek, J.; Toušková, J.; Remeš, Zdeněk; Kousal, J.; Gevorgyan, S.A.; Krebs, F.C.
2010 - Czech
Diffusion length of excitons in thermally transformed polyphenols is N 12-16 nm (samples P3MHOCT a P3CT) and, 9-1 nm (sample PT) Stacionární metoda měření spekter fotonapětí využívá nezávislosti fotogenerovaných proudů v neutrální oblasti a oblasti prostorového náboje.Dovoluje pracovat v bezkontaktním režimu. Na vzorkách P3MHOCT a P3CT byly naměřeny difúzní délky 12-16 nm, na PT 9-1 nm. Keywords: polyphenols; surface photovoltage Available at various institutes of the ASCR
Diffusion length of excitons in thermally transformed polyphenols

Diffusion length of excitons in thermally transformed polyphenols is N 12-16 nm (samples P3MHOCT a P3CT) and, 9-1 nm (sample PT)

Toušek, J.; Toušková, J.; Remeš, Zdeněk; Kousal, J.; Gevorgyan, S.A.; Krebs, F.C.
Fyzikální ústav, 2010

Analysis of crystallization kinetics of Li-Y phosphate glass under non-isothermal conditions
Nitsch, Karel; Rodová, Miroslava; Sveshnikov, Alexey
2010 - Czech
Crystallization kinetics of erbium doped LiY(PO3)4 glass was studied experimentally using DSC under non-isothermal conditions. Based on the experimental data the applicability of Johnson-Mehl-Avrami model was tested for description of crystallization kinetics of above mentioned glass. Kinetika krystalizace erbiem dopovaného skla o složení LiY(PO.sub.3./sub.).sub.4./sub.byla experimentálně studována pomocí DSC za neizotermických podmínek. Na získaných datech byla ověřována použitelnost modelu JMA pro popis kinetiky krystalizace uvedeného skla. Keywords: glassy LiY(PO.sub.3./sub.).sub.4./sub.; crystallization kinetics analysis; applicability of Johnson-Mehl-Avrami model Available at various institutes of the ASCR
Analysis of crystallization kinetics of Li-Y phosphate glass under non-isothermal conditions

Crystallization kinetics of erbium doped LiY(PO3)4 glass was studied experimentally using DSC under non-isothermal conditions. Based on the experimental data the applicability of Johnson-Mehl-Avrami ...

Nitsch, Karel; Rodová, Miroslava; Sveshnikov, Alexey
Fyzikální ústav, 2010

Effect of excitation wavelength on the measurement and interpretation of the Raman spectra of the silicon thin films
Ledinský, Martin
2010 - Czech
We discussed effect of wavelength of used excitation laser on the measurement and interpretation of the Raman spectra. V tomto článku se budeme zabývat vlivem vlnové délky použitého exitačního laseru na měření a interpretaci Ramanových spekter. Keywords: excitation wavelength; Raman spectra Available at various institutes of the ASCR
Effect of excitation wavelength on the measurement and interpretation of the Raman spectra of the silicon thin films

We discussed effect of wavelength of used excitation laser on the measurement and interpretation of the Raman spectra.

Ledinský, Martin
Fyzikální ústav, 2010

Optical characterization methods in the solar cell research
Remeš, Zdeněk; Vaněček, Milan; Poruba, A.
2010 - Czech
Optical spectroscopy isone of the most important methods used to characterize thin films and solar cells. Here we discusse the Constant Photocurrent Method (CPM) a Fourier Transform Photocurrent Spectroscopy (FTPS), Photothermal Deflection Spectroscopy (PDS), Fourier Transform Infrared Spectroscopy (FTIR) and optical spectroscopy with microscopic resolution. Optická spektroskopie patří k nejdůležitějším technikám používaným k charakterizaci tenkých vrstev a solárních článků. Na našem pracovišti se zabýváme především následujícími metodami: Fotoproudová spektroskopie (CPM), Fourier Transform Photocurrent Spectroscopy (FTPS), Fototermální spektroskopie (PDS), infračervená spektroskopie (FTIR) and optical spektroscopie with mikrometric resolution. Keywords: solar cells; optical spectroscopy Available at various institutes of the ASCR
Optical characterization methods in the solar cell research

Optical spectroscopy isone of the most important methods used to characterize thin films and solar cells. Here we discusse the Constant Photocurrent Method (CPM) a Fourier Transform Photocurrent ...

Remeš, Zdeněk; Vaněček, Milan; Poruba, A.
Fyzikální ústav, 2010

Selected methods of solid state surface study
Král, Robert
2010 - Czech
In this paper there are basic characterizations and equipments of LEED, RHEED, ISS, SIMS, AFM and TPD methods for study of properties and characterization of solid state surfaces. V příspěvku jsou uvedeny hlavní rysy a zařízení metod LEED, RHEED, ISS, SIMS, AFM a TPD používaných ke studiu vlastností a charakterizací povrchu pevných látek. Keywords: solid state; surface; spectroscopy; LEED; ISS; SIMS; AFM Available at various institutes of the ASCR
Selected methods of solid state surface study

In this paper there are basic characterizations and equipments of LEED, RHEED, ISS, SIMS, AFM and TPD methods for study of properties and characterization of solid state surfaces.

Král, Robert
Fyzikální ústav, 2010

X-ray diffraction studies of crystals
Hybler, Jiří
2010 - Czech
The study brings short review of methods of X-ray diffraction, namely rotation, Weissenberg, precession, Laue, and single crystal diffractometry. Methods of X-ray topography (Schulz, Berg-Barrett and Lang) are briefly mentioned. The lecture and paper are intended to inform researchers non-familiar with methods about their current developments. Studie přináší stručnou informaci o možnostech jednotlivých metod RTG difrakce. Popsána je metoda rotační, Weissenbergova, precesní a Laueho, a dále monokrystalová difraktometrie. Dále jsou zmíněny metody rentgenové topografie (Schulzova, Berg-Barrettova, Langova). Přednáška a článek slouží k přehledné informaci pracovníků, kteří sami s metodami nepracují. Keywords: X-ray diffraction; single crystal methods; diffractometer; X-ray topography Available at various institutes of the ASCR
X-ray diffraction studies of crystals

The study brings short review of methods of X-ray diffraction, namely rotation, Weissenberg, precession, Laue, and single crystal diffractometry. Methods of X-ray topography (Schulz, Berg-Barrett and ...

Hybler, Jiří
Fyzikální ústav, 2010

Experience with optical measurements of thin films
Remeš, Zdeněk
2010 - Czech
In this article I summarize my experience with measurement of the optical properties of thin layers. Article has three parts. The first part focuses on the measurement of optical spectra in the medium infrared region, in the second part I discuss the optical spectra in the near ultraviolet, visible and near infrared region and in the third part I discuss the optical spectroscopy done with the help of the optical microscope. V tomto článku shrnuji některé své zkušeností s měřením optických spekter tenkých vrstev. První část je zaměřena na měření optických spekter ve střední infračervené oblasti, v druhé části jsou diskutovány měření optických spekter tenkých vrstev v blízké ultrafialové, viditelné a blízké infračervené oblasti a ve třetí části se zabývám možnostmi měření optických spekter v optickém mikroskopu. Keywords: optical spectroscopy; FTIR; PDS; FTPS; laser calorimetry Available at various institutes of the ASCR
Experience with optical measurements of thin films

In this article I summarize my experience with measurement of the optical properties of thin layers. Article has three parts. The first part focuses on the measurement of optical spectra in the medium ...

Remeš, Zdeněk
Fyzikální ústav, 2010

Nanocomposite Ag-HA biocompatible layers
Jelínek, Miroslav; Weiserová, Marie; Kocourek, Tomáš; Jurek, Karel; Strnad, J.; Kudrna, P.
2009 - Czech
Thin films hydroxyapatite doped with silver were prepared by pulsed laser deposition from solid state target. For deposition KrF excimer laser was used. Film topology was studied using SEM and AFM. Film compostion was determined by WDX method. The silver content in layers was changed from single units to tenth of atomic percents. Results of physical testing and antibacterial test (E coli) will be presented. Příspěvek pojednává o přípravě KrF laserem a studiu dopovaných biokompatibilních materiálu se zaměřením na hydroxyapatit (HA). Je uveden přehled materiálů užívaných pro dopaci. Jsou uvedeny experimentální výsledky HA vrstev dopovaných stříbrem. Vlastnosti vrstev byly určovány pomocí profilometru, SEM, WDX, XRD a optické transmise. Obsah stříbra ve vrstvách HA se pohyboval od 0,06 do 13,7 at.%. Antibakteriální vlastnosti HA, stříbra a dopovaných vrstev HA stříbrem byly studovány “in vivo” pomocí buněk Escherichia coli. Keywords: PLD; thin films; hydroxyapatite; Ag Available at various institutes of the ASCR
Nanocomposite Ag-HA biocompatible layers

Thin films hydroxyapatite doped with silver were prepared by pulsed laser deposition from solid state target. For deposition KrF excimer laser was used. Film topology was studied using SEM and AFM. ...

Jelínek, Miroslav; Weiserová, Marie; Kocourek, Tomáš; Jurek, Karel; Strnad, J.; Kudrna, P.
Fyzikální ústav, 2009

About project

NRGL provides central access to information on grey literature produced in the Czech Republic in the fields of science, research and education. You can find more information about grey literature and NRGL at service web

Send your suggestions and comments to nusl@techlib.cz

Provider

http://www.techlib.cz

Facebook

Other bases