Ne (334)
Ano (48)
Použitá omezení
(3)
Počet nalezených dokumentů:
382
Publikováno od
do
Effect of sintering temperature on microstructure and mechanical properties of AE42 magnesium alloy prepared by spark plasma sintering
Minárik, P.; Lukáč, František; Cinert, Jakub; Šašek, S.; Král, R.
2018 - anglický
Magnesium alloy AE42 was prepared by powder metallurgy technique of spark plasma sintering. The effect of sintering parameters, particularly sintering temperature, on the microstructure and mechanical strength was investigated. The gas-atomized powder was sintered at four temperatures in the temperature range of 400-550 °C. It was found that mechanical strength of the sintered samples was significantly affected by several microstructural features. Application of relatively high load during sintering caused deformation of the individual particles and consequent recrystallization depending on the processing temperature resulted in the release of internal strain and in grain growth. As a result, the evolution of the mechanical strength as a function of the sintering temperature was significantly affected by residual stress, grain size and coarsening of secondary phase particles.
Klíčová slova:
Magnesium; Mechanical properties; Microstructure; Spark plasma sintering
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Effect of sintering temperature on microstructure and mechanical properties of AE42 magnesium alloy prepared by spark plasma sintering
Magnesium alloy AE42 was prepared by powder metallurgy technique of spark plasma sintering. The effect of sintering parameters, particularly sintering temperature, on the microstructure and mechanical ...
OLGA – efficient full wave code for the coupling of LH grills
Preinhaelter, Josef; Hillairet, J.; Urban, Jakub
2018 - anglický
The full wave code OLGA, for determining the coupling of a single row lower hybrid launcher (waveguide grills) to the plasma, is extended to handle multirow multijunction active passive structures (like the C3 and C4 launchers on TORE SUPRA) by implementing the scattering matrix formalism. The extended code is still computationally fast because of the use of (i) 2D splines of the plasma surface admittance in the accessibility region of the k-space, (ii) high order Gaussian quadrature rules for the integration of the coupling elements and (iii) utilizing the symmetries of the coupling elements in the multiperiodic structures. The extended OLGA code is benchmarked against the ALOHA-1D, ALOHA-2D and TOPLHA codes for the coupling of the C3 and C4 TORE SUPRA launchers for several plasma configurations derived from reflectometry and interferometery. Unlike nearly all codes (except the ALOHA-1D code), OLGA does not require large computational resources and can be used for everyday usage in planning experimental runs. In particular, it is shown that the OLGA code correctly handles the coupling of the C3 and C4 launchers over a very wide range of plasma densities in front of the grill.
Klíčová slova:
lower hybrid waves; coupling; large multirow multijunction grills; tokamak; full-wave
Dokument je dostupný na externích webových stránkách.
OLGA – efficient full wave code for the coupling of LH grills
The full wave code OLGA, for determining the coupling of a single row lower hybrid launcher (waveguide grills) to the plasma, is extended to handle multirow multijunction active passive structures ...
Electric probe measurements in the anode area of a DC arc plasma torch at low pressure
Ondáč, Peter; Mašláni, Alan; Hrabovský, Milan
2018 - anglický
We measured radial profiles of the electric field, plasma electrical potential and electron temperature in the hot anode area of a hybrid water-argon DC arc plasma torch with an external anode. The measurements were made under different values of the ambient pressure, during the restrike mode with a constricted anode arc attachment or during a supersonic mode with a diffuse anode arc attachment. The results provide first experimental data on plasma electrical potential in that anode area.
Klíčová slova:
plasma; arc; anode; low pressure; electric probes
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Electric probe measurements in the anode area of a DC arc plasma torch at low pressure
We measured radial profiles of the electric field, plasma electrical potential and electron temperature in the hot anode area of a hybrid water-argon DC arc plasma torch with an external anode. The ...
The effect of spark plasma sintering on the porosity and mechanical properties of Ti-15Mo alloy
Terynková, A.; Kozlík, J.; Bartha, K.; Chráska, Tomáš; Dlabáček, Zdeněk; Stráský, J.
2018 - anglický
Metastable β-titanium alloys are receiving much interest for various applications such as aircraft industry and medicine thanks to their excellent mechanical properties and biocompatibility. The common way of preparing the titanium alloys is hindered by its production costs. Powder metallurgy (PM) approach is a promising route for cost-effective fabrication of titanium alloys due to possibility of near net shaping. In this study, binary biomedical Ti-15Mo alloy was prepared by PM. Gas atomized powder was sintered by spark plasma sintering (SPS) above the β-transus temperature of the studied alloy. The compaction of the powders was accomplished by short-time sintering. The effect of the time of sintering on the porosity and the microhardness in centre part as well as in periphery part of the sample was investigated. The samples revealed significant inhomogeneity the porosity increases with the distance from the centre of the specimen. With increasing sintering times the porosity decreases and simultaneously the microhardness increases.
Klíčová slova:
Metastable β-titanium alloys; Porosity; Powder metallurgy; Spark plasma sintering
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
The effect of spark plasma sintering on the porosity and mechanical properties of Ti-15Mo alloy
Metastable β-titanium alloys are receiving much interest for various applications such as aircraft industry and medicine thanks to their excellent mechanical properties and biocompatibility. The ...
Relativistic effects in plasma produced with sub-nanosecond 3-TW laser
Krása, J.; Klír, Daniel; Řezáč, Karel; Cikhardt, Jakub; Krůs, Miroslav; Velyhan, Andriy; Pfeifer, Miroslav; Dostál, Jan; Dudžák, Roman; Krupka, Michal; Kaufman, J.; Pisarczyk, T.; Kalinowska, Z.; Chodukowski, T.
2018 - anglický
This contribution deals with observations of relativistic electrons produced in a laser plasma interaction experiment at the PALS laser system operated at the Institute of Plasma Physics in Prague. The PALS laser is a near-infrared 3-TW iodine laser designed to deliver irradiance on target of 1016 Wcm2- in≈300 ps pulses at the wavelength of 1.315 μm. Various foils of 6 500 μm in thickness were irradiated with Iλ2 ≈5×1016 W cm-2 μm2 Under these conditions we have observed relativistic electrons expanding into the vacuum with maximum energy going beyond 4 MeV. The relativistically accelerated forward electrons escaping from the rear target surface were observed with the use of electron energy analysers. The observed electron energy spectra indicate that the applied laser intensity was increased by the thermal and relativistic self-focusing. The application of a unique femtosecond interferometry technique allowed us to observe bunches of thermal electrons occurring in the plasma expanding against the focused laser beam.
Klíčová slova:
laser-produced plasma; relativistic electrons
Dokument je dostupný na externích webových stránkách.
Relativistic effects in plasma produced with sub-nanosecond 3-TW laser
This contribution deals with observations of relativistic electrons produced in a laser plasma interaction experiment at the PALS laser system operated at the Institute of Plasma Physics in Prague. ...
Fluctuations in the scrape-off layer and edge plasma of the COMPASS tokamak
Seidl, Jakub; Jiráková, Kateřina; Adámek, Jiří; Grover, Ondřej; Horáček, Jan; Hron, Martin; Vondráček, Petr
2018 - anglický
In this work we study properties of turbulent structures in the scrape-off layer (SOL) and edge plasma of the COMPASS tokamak. Two distinct types of coherent oscillations are observed: a) broadband high frequency branch rotating in the electron diamagnetic direction, appearing mainly in the confined region but protruding also to the SOL b) low-frequency blobs rotating in an opposite poloidal direction, formed in the vicinity of the radius of zero electric field. The transition region is localized in the near SOL, where both types spatially overlap and interact and the radial particle transport gradually transfers from high to low frequencies. Even though skewness of fluctuations of the ion saturation current is positive even inside LCFS, distinguishable Gamma-distributed PDF, formed by the low-frequency fluctuations, arises in the near SOL and most of the fluctuations that form a positive skewness in the edge region disappear around LCFS.
Klíčová slova:
plasma; tokamak; turbulence
Dokument je dostupný na externích webových stránkách.
Fluctuations in the scrape-off layer and edge plasma of the COMPASS tokamak
In this work we study properties of turbulent structures in the scrape-off layer (SOL) and edge plasma of the COMPASS tokamak. Two distinct types of coherent oscillations are observed: a) broadband ...
Microstructure of commercially pure titanium after cryogenic milling and spark Plasma sintering
Kozlík, J.; Harcuba, P.; Stráský, J.; Chráska, Tomáš; Janeček, M.
2018 - anglický
Commercially pure titanium was prepared by advanced powder metallurgy methods with the aim to produce the ultra-fine grained material. Cryogenic attritor milling was used as a first step to refine the microstructure at liquid argon temperatures to suppress recovery and dynamic recrystallization. Spark plasma sintering was subsequently employed to produce bulk material, exploiting its ability to achieve fully dense structure in short time and thus to reduce the grain growth. In order to understand the undergoing microstructural changes during the process, detailed investigation was performed after each preparation step. Powder morphology was changed significantly after milling, while particle fragmentation was only limited. Grain size after sintering was in micrometer scale, relatively independent of sintering conditions.
Klíčová slova:
Cryogenic milling; Microstructure; Spark plasma sintering; Titanium
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Microstructure of commercially pure titanium after cryogenic milling and spark Plasma sintering
Commercially pure titanium was prepared by advanced powder metallurgy methods with the aim to produce the ultra-fine grained material. Cryogenic attritor milling was used as a first step to refine the ...
Thin nitride layers as permeation barriers
Veverka, Jakub; Matějíček, Jiří; Lukáč, František; Pospíšil, D.; Cvrček, L.; Nemanič, V.
2018 - anglický
Permeation barriers represent one of the crucial fields in materials development for thermonuclear fusion. Primary objective of the barriers is to suppress the permeation of hydrogen isotopes (mainly tritium) from future thermonuclear fusion facilities. Secondary objective is to reduce their retention in structural materials. Expected reactor conditions put high demands on the material, as well as on the final barrier quality. Key properties are tritium permeation reduction, absence of defects (especially cracks), high-temperature stability and corrossion resistance, and compatibility with structural materials (mostly ferritic-martensitic steels). Thin nitride layers, identified as promising permeation barriers, were prepared by diffusion-based nitridation and physical vapour deposition (PVD), and characterized.
Klíčová slova:
Permeation barriers; Nitride layers; PVD coating; Permeation measurement
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Thin nitride layers as permeation barriers
Permeation barriers represent one of the crucial fields in materials development for thermonuclear fusion. Primary objective of the barriers is to suppress the permeation of hydrogen isotopes (mainly ...
Characterization of flame sprayed abradable seal NiCrAl-bentonite coatings
Houdková, Š.; Česánek, Z.; Schubert, J.; Lukáč, František; Bystrianský, M.
2018 - anglický
The NiCrAl-21% Bentonite abradable coating, deposited by flame spraying, was exposed to 720°C / 1 hour air-annealing to evaluate its resistance against heat-induced changes. The SEM and XRD microstructure evaluation was done. After the air-annealing, the increase of HR15Y surface hardness was recorded and accompanied with decrease of abradability evaluated by Progressive Readability Hardness (PAH) test, although no demonstrable microstructural changes was recorded by SEM. XRD analyses evidenced the formation of nickel oxides and ordered Ni3Al phase during the air-annealing. Besides the abradable coating evaluation, this work brings the verification of the potential of PAH for scratch hardness testing. The measurement provides the results with low scatter, compared to usual surface hardness testing, and enables to distinguish between the depth of indentation in loaded and unloaded state, pointing out to the elastic/plastic deformation ratio.
Klíčová slova:
Abradability; Abradable seal; Flame spray; NiCrAl-Bentonite
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Characterization of flame sprayed abradable seal NiCrAl-bentonite coatings
The NiCrAl-21% Bentonite abradable coating, deposited by flame spraying, was exposed to 720°C / 1 hour air-annealing to evaluate its resistance against heat-induced changes. The SEM and XRD ...
Alternative Methods of Permeation Barriers Preparation
Veverka, Jakub; Matějíček, Jiří
2018 - anglický
Permeation barriers represent one of the crucial fields in materials development for thermonuclear fusion. Primary objective of the barriers is to suppress the permeation of hydrogen isotopes (mainly tritium) from future thermonuclear fusion facilities. Secondary objective is to reduce their retention in structural materials. Expected reactor conditions put high demands on the material, as well as on the final barrier quality. Key properties are tritium permeation reduction, absence of defects (especially cracks), high-temperature stability and corrossion resistance, and compatibility with structural materials (mostly ferritic-martensitic steels). Thin nitride layers, identified as promising permeation barriers, were prepared by diffusion-based nitridation and physical vapour deposition (PVD), and characterized.
Klíčová slova:
Permeation barriers; Nitride layers; PVD coating; Permeation measurement
Plné texty jsou dostupné na jednotlivých ústavech Akademie věd ČR.
Alternative Methods of Permeation Barriers Preparation
Permeation barriers represent one of the crucial fields in materials development for thermonuclear fusion. Primary objective of the barriers is to suppress the permeation of hydrogen isotopes (mainly ...
NUŠL poskytuje centrální přístup k informacím o šedé literatuře vznikající v ČR v oblastech vědy, výzkumu a vzdělávání. Více informací o šedé literatuře a NUŠL najdete na webu služby.
Vaše náměty a připomínky posílejte na email nusl@techlib.cz
Provozovatel
Zahraniční báze